[xboard.git] / xboard.texi

\input texinfo  @c -*-texinfo-*-
@c %**start of header
@setfilename xboard.info
@settitle XBoard
@c %**end of header

@include version.texi

@ifinfo
@format
INFO-DIR-SECTION Games
START-INFO-DIR-ENTRY
* xboard: (xboard).         An X Window System graphical chessboard.
END-INFO-DIR-ENTRY
@end format
@end ifinfo

@titlepage
@title XBoard

@page
@vskip 0pt plus 1filll
@include copyright.texi

@end titlepage
@ifset man
.TH xboard 6 "$Date: " "GNU"
.SH NAME
.PP
xboard @- X graphical user interface for chess
.SH SYNOPSIS
.PP
.B xboard [options]
.br
.B xboard -ics -icshost hostname [options]
.br
.B xboard -ncp [options]
.br
.B |pxboard
.br
.B cmail [options]
@end ifset

@node Top
@top Introduction
@cindex introduction

@ifset man
.SH DESCRIPTION
@end ifset

XBoard is a graphical chessboard that can serve as a
user interface to chess engines (such as GNU Chess), the
Internet Chess Servers,
electronic mail correspondence chess, or your own collection of saved games.

This manual documents version @value{VERSION} of XBoard.

@menu
* Major modes::     The main things XBoard can do.
* Basic operation:: Mouse and keyboard functions.
* Menus::           Menus, buttons, and keys.
* Options::         Command options supported by XBoard.
* Chess Servers::   Using XBoard with an Internet Chess Server (ICS).
* Firewalls::       Connecting to a chess server through a firewall.
* Environment::     Environment variables.
* Limitations::     Known limitations and/or bugs.
* Problems::        How and where to report any problems you run into.
* Contributors::    People who have helped developing XBoard.
* CMail::           Using XBoard for electronic correspondence chess.
* Other programs::  Other programs you can use with XBoard.
@ifnottex
* Copyright::       Copyright notice for this manual.
@end ifnottex
* Copying::         The GNU General Public License.

* Index::           Index of concepts and symbol names.
@end menu

@node Major modes
@chapter Major modes
@cindex Major modes

XBoard always runs in one of four major modes.  You select the
major mode from the command line when you start up XBoard.

@table @asis
@item xboard [options]
As an interface to GNU Chess or another chess engine running on your
machine, XBoard lets you play a game against the machine,
set up arbitrary positions, force variations, watch a game between two
chess engines, interactively analyze your stored games or set up and
analyze arbitrary positions.
To run engines that use the UCI standard XBoard will draw upon
the Polyglot adapter fully transparently, but you will need to have
the polyglot package installed for this to work.
@item xboard -ics -icshost hostname [options]
As Internet Chess Server (ICS) interface, XBoard
lets you play against other ICS users, observe games
they are playing, or review games that have recently finished.  Most
of the ICS "wild" chess variants are supported, including bughouse.
@item xboard -ncp [options]
XBoard can also be used simply
as an electronic chessboard to play through games. It will read and
write game files and allow you to play through variations
manually. You can use it to browse games off the net or review games
you have saved.  These features are also available in the other modes.
@item |pxboard
If you want to pipe games into XBoard, use the supplied shell
script @file{pxboard}.  For example, from the news reader @file{xrn},
find a message with one or more games in it, click the Save button,
and type @samp{|pxboard} as the file name.
@item cmail [options]
As an interface to electronic mail correspondence chess, XBoard
works with the cmail program. See @ref{CMail} below for
instructions.
@end table

@node Basic operation
@chapter Basic operation
@cindex Basic operation

To move a piece, you can drag it with the left mouse button, or you
can click the left mouse button once on the piece, then once more on
the destination square. To under-promote a Pawn you can drag it backwards
until it morphs into the piece you want to promote to, after which you
drag that forward to the promotion square.
Or after selecting the pawn with a first click you can then click
the promotion square and move the mouse while keeping the button down
until the piece that you want appears in the promotion square.
To castle you move the King to its destination or, in Chess960,
on top of the Rook you want to castle with.
In crazyhouse, bughouse or shogi you can
drag and drop pieces to the board from the holdings squares 
displayed next to the board.

Old behavior, where right-clicking a square brings up a menu
where you can select what piece to drop on it can still be 
selected through the @samp{Drop Menu} option.
Only in Edit Position mode right and middle clicking a square is still used to
put a piece on it, and the piece to drop is selected by sweeping
the mouse vertically with the button held down.

The default function of the right mouse button in other modes is 
to display the position the chess program thinks it will end up in.
While moving the mouse vertically with this button pressed 
XBoard will step through the principal variation to show how 
this position will be reached.
Lines of play displayed in the engine-output window,
or PGN variations in the comment window can similarly
be played out on the board, by right-clicking on them.
Only in Analysis mode, when you walk along a PV, 
releasing the mouse button might forward the game upto that point,
like you entered all previous PV moves.
As the display of the PV in that case starts after the first move
a simple right-click will play the move the engine indicates.

In Analysis mode you can also make a move by grabbing the piece
with a double-click of the left mouse button
(or while keeping the @kbd{Ctrl} key pressed).
In this case the move you enter will not be played,
but will be excluded from the analysis of the current position.
(Or included if it was already excluded; it is a toggle.)
This only works for engines that support this feature.

When connected to an ICS, it is possible to call up a graphical
representation of players seeking a game in stead of the chess board,
when the latter is not in use
(i.e. when you are not playing or observing).
Left-clicking the display area will switch between this 'seek graph'
and the chess board.
Hovering the mouse pointer over a dot will show the details of the
seek ad in the message field above the board.
Left-clicking the dot will challenge that player.
Right-clicking a dot will 'push it to the back',
to reveal any dots that were hidden behind it.
Right-clicking off dots will refresh the graph.

Most other XBoard commands are available from the menu bar. The most
frequently used commands also have shortcut keys or on-screen buttons.
These shortcut keystrokes are mostly non-printable characters.
Typing a letter or digit while the board window has focus
will bring up a type-in box with the typed letter already in it.
You can use that to type a move in situations where it is your
turn to enter a move,
type a move number to call up the position after that move
in the display,
or, in Edit Position mode, type a FEN.
Some rarely used parameters can only be set through options on the
command line used to invoke XBoard.

XBoard uses a settings file, in which it can remember any changes to
the settings that are made through menus or command-line options,
so they will still apply when you restart XBoard for another session.
The settings can be saved into this file automatically when XBoard exits,
or on explicit request of the user.
Note that the board window can be sized by the user, but that this
will not affect the size of the clocks above it, and won't be remembered
in the settings file.
To persistently change the size of the clocks, use the @code{size}
command-line option when starting XBoard.
The default name for the settings file is /etc/xboard/xboard.conf,
but in a standard install this file is only used as a master settings
file that determines the system-wide default settings,
and defers reading and writing of user settings to a user-specific
file like ~/.xboardrc in the user's home directory.

When XBoard is iconized, its graphical icon is a white knight if
it is White's turn to move, a black knight if it is Black's turn.

@node Menus
@chapter Menus, buttons, and keys
@cindex Menus

@menu
* File Menu::       Accessing external games and positions.
* Edit Menu::       Altering games, positions, PGN tags or comments.
* View Menu::       Controlling XBoard's shape and looks.
* Mode Menu::       Selecting XBoard's mode.
* Action Menu::     Talking to the chess engine or ICS opponents.
* Engine Menu::     Controlling settings and actions of the engine(s).
* Options Menu::    User preferences.
* Help Menu::       Getting help.
* Keys::            Other shortcut keys.
@end menu

@node File Menu
@section File Menu
@cindex File Menu
@cindex Menu, File
@table @asis
@item New Game
@cindex New Game, Menu Item
Resets XBoard and the chess engine to the beginning of a new chess
game. The @kbd{Ctrl-N} key is a keyboard equivalent. In Internet Chess
Server mode, clears the current state of XBoard, then
resynchronizes with the ICS by sending a refresh command. If you want to
stop playing, observing, or examining an ICS game, use an
appropriate command from the Action menu, not @samp{New Game}.
@xref{Action Menu}.
@item New Shuffle Game
@cindex New Shuffle Game, Menu Item
Similar to @samp{New Game}, but allows you to specify a particular initial position 
(according to a standardized numbering system)
in chess variants which use randomized opening positions (e.g. Chess960).
@item shuffle
@cindex shuffle, Menu Item
Ticking @samp{shuffle} will cause the current variant to be played
with shuffled initial position.
Shuffling will preserve the possibility to castle in the way allowed by the variant.
@item Fischer castling
@cindex Fischer castling, menu item
Ticking @samp{Fischer castling} will allow castling with Kings and Rooks
that did not start in their normal place, as in Chess960.
@item Start-position number
@itemx randomize
@itemx pick fixed
@cindex randomize, Menu Item
@cindex pick fixed, Menu Item
@cindex Start-position number, Menu Item
The @samp{Start-position number} selects a particular start position
from all allowed shufflings, which will then be used for every new game.
Setting this to -1 (which can be done by pressing the @samp{randomize} button)
will cause a fresh random position to be picked for every new game.
Pressing the @samp{pick fixed} button causes @samp{Start-position number}
to be set to a random value, to be used for all subsequent games. 
@item New Variant
@cindex New variant, Menu Item
Allows you to select a new chess variant in non-ICS mode. 
(In ICS play, the ICS is responsible for deciding which variant will be played,
and XBoard adapts automatically.)  The shifted @kbd{Alt+V} key is a 
keyboard equivalent. If you play with an engine, the engine must
be able to play the selected variant, or the corresponding choice will be disabled.
XBoard supports all major variants, such as xiangqi, shogi, chess, chess960,
makruk, Capablanca Chess, shatranj, crazyhouse, bughouse.

You can overrule the default board format of the selected variant,
(e.g. to play suicide chess on a 6 x 6 board),
in this dialog, but normally you would not do that, 
and leave them at '-1', which means 'default' for the chosen variant.
@item Load Game
@cindex Load Game, Menu Item
Plays a game from a record file. The @kbd{Ctrl-O} key is a keyboard equivalent.
A pop-up dialog prompts you for the file name. If the file contains more
than one game, a second pop-up dialog
displays a list of games (with information drawn from their PGN tags, if
any), and you can select the one you want. Alternatively, you can load the
Nth game in the file directly, by typing the number @kbd{N} after the
file name, separated by a space.

The game-file parser will accept PGN (portable game notation),
or in fact almost any file that contains moves in algebraic
notation. 
Notation of the form @samp{P@@f7}
is accepted for piece-drops in bughouse games;
this is a nonstandard extension to PGN.
If the file includes a PGN position (FEN tag), or an old-style
XBoard position diagram bracketed by @samp{[--} and @samp{--]}
before the first move, the game starts from that position. Text
enclosed in parentheses, square brackets, or curly braces is assumed to
be commentary and is displayed in a pop-up window. Any other
text in the file is ignored. PGN variations (enclosed in
parentheses) also are treated as comments;
however, if you rights-click them in the comment window,
XBoard will shelve the current line, and load the the selected variation,
so you can step through it.
You can later revert to the previous line with the @samp{Revert} command.
This way you can walk quite complex varation trees with XBoard.
The nonstandard PGN tag [Variant "varname"] functions similarly to
the -variant command-line option (see below), allowing games in certain chess
variants to be loaded.  
Note that it must appear before any FEN tag for XBoard to recognize
variant FENs appropriately.
There is also a heuristic to 
recognize chess variants from the Event tag, by looking for the strings
that the Internet Chess Servers put there when saving variant ("wild") games.
@item Load Position
@cindex Load Position, Menu Item
Sets up a position from a position file.  A pop-up dialog prompts
you for the file name.  The shifted @kbd{Ctrl-O} key is a keyboard 
equivalent. If the file contains more than one saved
position, and you want to load the Nth one, type the number N
after the file name, separated by a space. Position files must
be in FEN (Forsythe-Edwards notation), or in the format that the
Save Position command writes when oldSaveStyle is turned on.
@item Load Next Position
@cindex Load Next Position, Menu Item
Loads the next position from the last position file you loaded.
The shifted @kbd{PgDn} key is a keyboard equivalent.
@item Load Previous Position
@cindex Load Previous Position, Menu Item
Loads the previous position from the last position file you
loaded. The shifted @kbd{PgUp} key is a keyboard equivalent.
Not available if the last position was loaded from a pipe.
@item Save Game
@cindex Save Game, Menu Item
Appends a record of the current game to a file.
The @kbd{Ctrl-S} key is a keyboard equivalent.
A pop-up dialog
prompts you for the file name. If the game did not begin with
the standard starting position, the game file includes the
starting position used. Games are saved in the PGN (portable
game notation) format, unless the oldSaveStyle option is true,
in which case they are saved in an older format that is specific
to XBoard. Both formats are human-readable, and both can be
read back by the @samp{Load Game} command.
Notation of the form @samp{P@@f7}
is accepted for piece-drops in bughouse games;
this is a nonstandard extension to PGN.
@item Save Position
@cindex Save Position, Menu Item
Appends a diagram of the current position to a file.
The shifted @kbd{Ctrl+S} key is a keyboard equivalent. 
A pop-up dialog prompts you for the file name. Positions are saved in
FEN (Forsythe-Edwards notation) format unless the @code{oldSaveStyle}
option is true, in which case they are saved in an older,
human-readable format that is specific to XBoard. Both formats
can be read back by the @samp{Load Position} command.
@item Save Selected Games
@cindex Save Selected Games
Will cause all games selected for display in the current Game List
to be appended to a file of the user's choice.
@item Save Games as Book
@cindex Save Games as Book, Menu Item
Creates an opening book from the currently loaded game file,
incorporating only the games currently selected in the Game List.
The book will be saved on the file specified in the @samp{Common Engine}
options dialog.
The value of @samp{Book Depth} specified in that same dialog will 
be used to determine how many moves of each game will be added to
the internal book buffer.
This command can take a long time to process,
and the size of the buffer is currently limited.
At the end the buffer will be saved as a Polyglot book,
but the buffer will not be cleared,
so that you can continue adding games from other game files.
@item Mail Move
@itemx Reload CMail Message
@cindex Mail Move, Menu Item
@cindex Reload CMail Message, Menu Item
See @ref{CMail}.
@item Exit
@cindex Exit, Menu Item
Exits from XBoard. The @kbd{Ctrl-Q} key is a keyboard equivalent.
@end table

@node Edit Menu
@section Edit Menu
@cindex Menu, Edit
@cindex Edit Menu
@table @asis
@item Copy Game
@cindex Copy Game, Menu Item
Copies a record of the current game to an internal clipboard in PGN
format and sets the X selection to the game text. The @kbd{Ctrl-C} 
key is a keyboard equivalent. The game can be
pasted to another application (such as a text editor or another copy
of XBoard) using that application's paste command.  In many X
applications, such as xterm and emacs, the middle mouse button can be
used for pasting; in XBoard, you must use the Paste Game command.
@item Copy Position
@cindex Copy Position, Menu Item
Copies the current position to an internal clipboard in FEN format and
sets the X selection to the position text. The shifted @kbd{Ctrl-C} key 
is a keyboard equivalent.  The position can be pasted
to another application (such as a text editor or another copy of
XBoard) using that application's paste command.  In many X
applications, such as xterm and emacs, the middle mouse button can be
used for pasting; in XBoard, you must use the Paste Position command.
@item Copy Game List
@cindex Copy Game List, Menu Item
Copies the current game list to the clipboard,
and sets the X selection to this text.
A format of comma-separated double-quoted strings is used,
including all tags,
so it can be easily imported into spread-sheet programs.
@item Paste Game
@cindex Paste Game, Menu Item
Interprets the current X selection as a game record and loads it, as
with Load Game. The @kbd{Ctrl-V} key is a keyboard equivalent.
@item Paste Position
@cindex Paste Position, Menu Item
Interprets the current X selection as a FEN position and loads it, as
with Load Position. The shifted @kbd{Ctrl-V} key is a keyboard equivalent.
@item Edit Game
@cindex Edit Game, Menu Item
Allows you to make moves for both Black and White, and to change
moves after backing up with the @samp{Backward} command. The clocks do
not run. The @kbd{Ctrl-E} key is a keyboard equivalent.

In chess engine mode, the chess engine continues to check moves for legality
but does not participate in the game. You can bring the chess engine
into the game by selecting @samp{Machine White}, @samp{Machine Black},
or @samp{Two Machines}.

In ICS mode, the moves are not sent to the ICS: @samp{Edit Game} takes
XBoard out of ICS Client mode and lets you edit games locally.
If you want to edit games on ICS in a way that other ICS users
can see, use the ICS @kbd{examine} command or start an ICS match
against yourself.
@item Edit Position
@cindex Edit Position, Menu Item
Lets you set up an arbitrary board position.
The shifted @kbd{Ctrl-E} key is a keyboard equivalent.
Use mouse button 1 to drag pieces to new squares, or to delete a piece
by dragging it off the board or dragging an empty square on top of it.
When you do this keeping the @kbd{Ctrl} key pressed,
or start dragging with a double-click,
you will move a copy of the piece, leaving the piece itself where it was.
In variants where pieces can promote (such as Shogi),
left-clicking an already selected piece promotes or demotes it.
To drop a new piece on a square, press mouse button 2 or 3 over the
square.
This puts a white or black pawn in the square, respectively,
but you can change that to any other piece type by dragging the
mouse down before you release the button.
You will then see the piece on the originally clicked square
cycle through the available pieces
(including those of opposite color),
and can release the button when you see the piece you want.
(Note you can swap the function of button 2 and 3 by pressing
the shift key, and that there is an option @code{monoMouse}
to combine al functions in one button, which then acts as
button 3 over an empty square, and as button 1 over a piece.)
To alter the side to move, you can click the clock 
(the words White and Black above the board)
of the side you want to give the move to.
To clear the board you can click the clock of the side that
already has the move (which is highlighted in black).
If you repeat this the board will cycle from empty to a
@code{pallette board} containing every piece once to the initial
position to the one before clearing.
The quickest way to set up a position is usually to start
with the pallette board, and move the pieces to were you
want them, duplicating them where necessary by using the
@kbd{Ctrl} key, dragging those you don't want off board,
and use static button 2 or 3 clicks to place the Pawns.
The old behavior with a piece menu can still be configured
with the aid of the @code{pieceMenu} option.
Dragging empty squares off board can create boards with
holes (inaccessible black squares) in them.
Selecting @samp{Edit Position} causes XBoard to discard
all remembered moves in the current game.

In ICS mode, changes made to the position by @samp{Edit Position} are
not sent to the ICS: @samp{Edit Position} takes XBoard out of
@samp{ICS Client} mode and lets you edit positions locally. If you want to
edit positions on ICS in a way that other ICS users can see, use
the ICS @kbd{examine} command, or start an ICS match against yourself.
(See also the ICS Client topic above.)
@item Edit Tags
@cindex Edit Tags, Menu Item
Lets you edit the PGN (portable game notation)
tags for the current game. After editing, the tags must still conform to
the PGN tag syntax:

@example
<tag-section> ::= <tag-pair> <tag-section>
                        <empty>
<tag-pair> ::= [ <tag-name> <tag-value> ]
<tag-name> ::= <identifier>
<tag-value> ::= <string>
@end example
@noindent
See the PGN Standard for full details. Here is an example:

@example
[Event "Portoroz Interzonal"]
[Site "Portoroz, Yugoslavia"]
[Date "1958.08.16"]
[Round "8"]
[White "Robert J. Fischer"]
[Black "Bent Larsen"]
[Result "1-0"]
@end example
@noindent
Any characters that do not match this syntax are silently ignored. Note that
the PGN standard requires all games to have at least the seven tags shown
above. Any that you omit will be filled in by XBoard
with @samp{?} (unknown value), or @samp{-} (inapplicable value).
@item Edit Comment
@cindex Edit Comment, Menu Item
Adds or modifies a comment on the current position. Comments are
saved by @samp{Save Game} and are displayed by @samp{Load Game},
PGN variations will also be printed in this window,
and can be promoted to main line by right-clicking them.
@samp{Forward}, and @samp{Backward}.
@item Edit Book
@cindex Edit Book, Menu Item
Pops up a window listing the moves available in the GUI book 
(specified in the @samp{Common Engine Settings} dialog) 
from the currently displayed position, 
together with their weights and (optionally in braces) learn info. 
You can then edit this list, and the new list will be stored
back into the book when you press 'save changes'.
When you press the button 'add next move', and play a move
on the board, that move will be added to the list with weight 1.
Note that the listed percentages are neither used, nor updated when 
you change the weights; they are just there as an optical aid.
When you right-click a move in the list it will be played.
@item Revert
@itemx Annotate
@cindex Revert, Menu Item
@cindex Annotate, Menu Item
If you are examining an ICS game and Pause mode is off,
Revert issues the ICS command @samp{revert}.
In local mode, when you were editing or analyzing a game, 
and the @code{-variations} command-line option is switched on,
you can start a new variation by holding the Shift key down while
entering a move not at the end of the game.
Variations can also become the currently displayed line by
clicking a PGN variation displayed in the Comment window.
This can be applied recursively, 
so that you can analyze variations on variations; 
each time you create a new variation by entering an alternative move
with Shift pressed, or select a new one from the Comment window,
the current variation will be shelved. 
@samp{Revert} allows you to return to the most recently shelved variation.
The difference between @samp{Revert} and @samp{Annotate}
is that with the latter,
the variation you are now abandoning will be added as a comment 
(in PGN variation syntax, i.e. between parentheses)
to the original move where you deviated, for later recalling.
The @kbd{Home} key is a keyboard equivalent to @samp{Revert}.
@item Truncate Game
@cindex Truncate Game, Menu Item
Discards all remembered moves of the game beyond the current
position. Puts XBoard into @samp{Edit Game} mode if it was not there
already.
The @kbd{End} key is a keyboard equivalent.
@item Backward
@itemx <
@cindex Backward, Menu Item
@cindex <, Button
Steps backward through a series of remembered moves.
The @samp{[<]} button and the @kbd{Alt+LeftArrow} key are equivalents,
as is turning the mouse wheel towards you.
In addition, pressing the ??? key steps back one move, and releasing
it steps forward again.

In most modes, @samp{Backward} only lets you look back at old positions;
it does not retract moves. This is the case if you are playing against
a chess engine, playing or observing a game on an ICS, or loading a game.
If you select @samp{Backward} in any of these situations, you will not
be allowed to make a different move. Use @samp{Retract Move} or
@samp{Edit Game} if you want to change past moves.

If you are examining an ICS game, the behavior of @samp{Backward}
depends on whether XBoard is in Pause mode. If Pause mode is
off, @samp{Backward} issues the ICS backward command, which backs up
everyone's view of the game and allows you to make a different
move. If Pause mode is on, @samp{Backward} only backs up your local
view.
@item Forward
@itemx >
@cindex Forward, Menu Item
@cindex >, Button
Steps forward through a series of remembered moves (undoing the
effect of @samp{Backward}) or forward through a game file. The
@samp{[>]} button and the @kbd{Alt+RightArrow} key are equivalents,
as is turning the mouse wheel away from you.

If you are examining an ICS game, the behavior of Forward
depends on whether XBoard is in Pause mode. If Pause mode is
off, @samp{Forward} issues the ICS forward command, which moves
everyone's view of the game forward along the current line. If
Pause mode is on, @samp{Forward} only moves your local view forward,
and it will not go past the position that the game was in when
you paused.
@item Back to Start
@itemx <<
@cindex Back to Start, Menu Item
@cindex <<, Button
Jumps backward to the first remembered position in the game.
The @samp{[<<]} button and the @kbd{Alt+Home} key are equivalents.

In most modes, Back to Start only lets you look back at old
positions; it does not retract moves. This is the case if you
are playing against a local chess engine, playing or observing a game on
a chess server, or loading a game. If you select @samp{Back to Start} in any
of these situations, you will not be allowed to make different
moves. Use @samp{Retract Move} or @samp{Edit Game} if you want to change past
moves; or use Reset to start a new game.

If you are examining an ICS game, the behavior of @samp{Back to
Start} depends on whether XBoard is in Pause mode. If Pause mode
is off, @samp{Back to Start} issues the ICS @samp{backward 999999}
command, which backs up everyone's view of the game to the start and
allows you to make different moves. If Pause mode is on, @samp{Back
to Start} only backs up your local view.
@item Forward to End
@itemx >>
@cindex Forward to End, Menu Item
@cindex >>, Button
Jumps forward to the last remembered position in the game. The
@samp{[>>]} button and the @kbd{Alt+End} key are equivalents.

If you are examining an ICS game, the behavior of @samp{Forward to
End} depends on whether XBoard is in Pause mode. If Pause mode
is off, @samp{Forward to End} issues the ICS @samp{forward 999999}
command, which moves everyone's view of the game forward to the end of
the current line. If Pause mode is on, @samp{Forward to End} only moves
your local view forward, and it will not go past the position
that the game was in when you paused.
@end table

@node View Menu
@section View Menu
@cindex Menu, View
@cindex View Menu
@table @asis
@item Flip View
@cindex Flip View, Menu Item
Inverts your view of the chess board for the duration of the
current game. Starting a new game returns the board to normal.
The @kbd{F2} key is a keyboard equivalent.
@item Show Engine Output
@cindex Show Engine Output, Menu Item
Shows or hides a window in which the thinking output of any loaded engines
is displayed. The shifted @kbd{Alt+O} key is a keyboard equivalent.
XBoard will display lines of thinking output of the same depth ordered by score, 
(highest score on top), rather than in the order the engine produced them. 
Usually this amounts to the same, as a normal engine search will only find new PV 
(and emit it as thinking output) 
when it searches a move with a higher score than the previous variation. 
But when the engine is in multi-variation mode this needs not always be true, 
and it is more convenient for someone analyzing games to see the moves sorted by score. 
The order in which the engine found them is only of interest to the engine author, 
and can still be deduced from the time or node count printed with the line.
Right-clicking a line in this window, and then moving the mouse vertically with the
right button kept down, will make XBoard play through the PV listed there.
The use of the board window as 'variation board' will normally end when
you release the right button,
or when the opponent plays a move.
But beware: in Analysis mode, moves thus played out might be added to the game,
depending on the setting of the option 'Play moves of clicked PV',
when you initiate the click left of the PV in the score area.
The Engine-Output pane for each engine will contain a header displaying the
multi-PV status and a list of excluded moves in Analysis mode,
which are also responsive to right-clicking:
Clicking the words 'fewer' or 'more' will alter the number of variations
shown at each depth, through the engine's MultiPV option,
while clicking in between those and moving the mouse horizontally adjust
the option 'Multi-PV Margin'. (In so far the engines support those.)
@item Show Move History
@cindex Show Move History, Menu Item
Shows or hides a list of moves of the current game.
The shifted @kbd{Alt+H} key is a keyboard equivalent.
This list allows you to move the display to any earlier position in the game
by clicking on the corresponding move.
@item Show Evaluation Graph
@cindex Show Evaluation Graph, Menu Item
Shows or hides a window which displays a graph of how the engine score(s)
evolved as a function of the move number. 
The shifted @kbd{Alt+E} key is a keyboard equivalent.
The title bar shows the score (and search depth at which it was obtained)
of the currently displayed position numerically.
Clicking on the graph will bring
the corresponding position in the board display.
A button 3 click will toggle the display mode between plain and differential
(showing the difference in score between successive half moves).
Using the mouse wheel over the window will change the scale of the
low-score region (from -1 to +1).
@item Show Game List
@cindex Show Game List, Menu Item
Shows or hides the list of games generated by the last @samp{Load Game}
command. The shifted @kbd{Alt+G} key is a keyboard equivalent.
The line describing each game is built from a selection of the PGN tags.
Which tags contribute, and in what order, can be changed by the @samp{Game list tags}
menu dialog, which can be popped up through the @samp{Tags} button below the Game List.
Display can be restricted to a sub-set of the games meeting certain criteria.
A text entry below the game list allows you to type a text that the game lines
must contain in order to be displayed.
Games can also be selected based on their Elo PGN tag,
as set in the @samp{Load Game Options} dialog, which can be popped up through the
@samp{Thresholds} button below the Game List.
Finally they can be selected based on containing a position similar to the one
currently displayed in the main window, by pressing the 'Position' button below
the Game List, (which searches the entire list for the position), or the 'Narrow'
button (which only searches the already-selected games).
What counts as similar enough to be selected can also be set in the
@samp{Load Game Options} dialog, and ranges from an exact match to just the
same material.
@item Tags
@cindex Tags, Menu Item
Pops up a window which shows the PGN (portable game notation)
tags for the current game. 
For now this is a duplicate of the @samp{Edit Tags} item in the @samp{Edit} menu.
@item Comments
@cindex Comments, Menu Item
Pops up a window which shows any comments to or variations on the current move.
For now this is a duplicate of the @samp{Edit Comment} item in the @samp{Edit} menu.
@item ICS Input Box
@cindex ICS Input Box, Menu Item
If this option is set in ICS mode,
XBoard
creates an extra window that you can use for typing in ICS commands.
The input box is especially useful if you want to type in something long or do
some editing on your input, because output from ICS doesn't get mixed
in with your typing as it would in the main terminal window.
@item ICS/Chat Console
@cindex ICS Chat/Console, Menu Item
This menu item opens a window in which you can interact with the ICS,
so you don't have to use the messy xterm from which you launched XBoard
for that.
The window has a text entry at the bottom where you can type your
commands and messages unhindered by the stream of ICS output.
The latter will be displayed in a large pane above the input field,
the ICS Console.
Up and down arrow keys can be used to recall previous input lines.
Typing an <Esc> character in the input field transfers focus back
to the board window (so you could operate the menus there
through accelerator keys).
Typing a printable character in the board window transfers focus
back to the input field of the @samp{ICS Chat/Console} window.
@item Chats
@cindex Chats
There is a row of buttons at the top of the @samp{ICS Chat/Console} dialog,
which can be used to navigate between upto 5 'chats'
with other ICS users (or channels).
These will switch the window to 'chat mode',
where the ICS output pane is vertically split to divert messages from
a specific user or ICS channel to the lower half.
Lines typed in the input field will then be interpreted as messages
to be sent to that user or channel,
(automatically prefixed with the apporpriate ICS command and user name)
rather than as commands to the ICS.
Chats will keep collecting ICS output intended for them even when not displayed,
and their buttons will turn orange to alert the user there has been activity.
Typing <Tab> in the input field will switch to another active chat,
giving priority to those with content you have not seen yet.
@item New Chat
@cindex New Chat, Menu Item
Buttons for chats currently not assigned to a user or channel
will carry the text @samp{New Chat}, and pressing them will
switch to chat mode, enabling you to enter the user name or channel number
you want to use it for.
Typing Ctrl-N in the input field is a keyboard equivalent.
@item Chat partner
@cindex Chat partner, Menu Item
To (re-)assign a chat, write the name of your chat partner, the channel number,
or the words 'shouts', 'whispers', 'cshouts' in the @samp{Chat partner} text entry
(ending with <Enter>!).
Typing Ctrl-O in the input field at the bottom of the window will
open a chat with the person that last sent you a 'tell' that was printed
in the ICS Console output pane.
The @samp{ICS text menu} can contain a button @samp{Open Chat (name)}
that can be used to open a chat with as partner the word/number you
right-clicked in the output pane to pop up this menu. 
@item End Chat
@cindex End Chat, Menu Item
This button, only visible when the chat pane is open,
will clear the @samp{Chat partner} field, so that the chat can be
assigned to a new user or channel.
Typing Ctrl-E in the input field is a keyboard equivalent.
@item Hide
@cindex Hide, Menu Item
This button, only visible when the chat pane is open,
will close the latter, so you can use the input field
to give commands to the ICS again.
Typing Ctrl-H in the input field is a keyboard equivalent.
@item ICS text menu
@cindex ICS text menu, Menu Item
Brings up a menu that is user-configurable through the @code{icsMenu} option.
Buttons in this menu can sent pre-configured commands directly to the ICS,
or can put partial commands in the input field of the @samp{ICS Chat/Console}
window, so that you can complete those with some text of your own before
sending them to the ICS by pressing Enter.
This menu item can also be popped up by right-clicking in the text memos
of the ICS Chat/Console window.
In that case the word that was clicked can be incorporated in the message
sent to the ICS. E.g. to challenge a player whose name you click for a game,
or prepare for sending him a message through a 'tell' commands.
@item Board
@cindex Board, Menu Item
Summons a dialog where you can customize the look of the chess board.
@item White Piece Color
@itemx Black Piece Color
@itemx Light Square Color
@itemx Dark Square Color
@itemx Highlight Color
@itemx Premove Highlight Color
@cindex Piece Color, Menu Item
@cindex Square Color, Menu Item
@cindex Highlight Color, Menu Item
These items set the color of pieces, board squares and move highlights
(borders or arrow).
Square colors are only used when the @samp{Use Board Textures} option is off,
the piece colors only when @samp{Use piece bitmaps with their own colors} is off.
You can type the color as hexadecimally encoded RGB value preceded by '#',
or adjust it through the R, G, B and D buttons to make it redder, greener, bluer
or darker.
A sample of the adjusted color will be displayed behind its text description;
pressing this colored button restores the default value for the color.
@item Flip Pieces Shogi Style
@cindex Flip Pieces Shogi Style, Menu Item
With this option on XBoard will swap white and black pieces,
when you flip the view of the board to make white play downward.
This should be used with piece themes that do not distinguish sides by color,
but by orientation.
@item Mono Mode
@cindex Mono Mode, Menu Item
This option sets XBoard to pure black-and-white display
(no grey scales, and thus no anti-aliasing).
@item Logo Size
@cindex Logo Size, Menu Item
Specifies the width of the engine logos displayed next to the clocks, in pixels.
Setting it to 0 suppresses the display of such logos.
The height of the logo will be half its width.
In the GTK build of XBoard any non-zero value is equivalent,
and the logos are always sized to 1/4 of the board width.
@item Line Gap
@cindex Line Gap, Menu Item
This option specifies the width of the grid lines that separate the squares,
which change color on highlighting the move.
Setting it to 0 suppresses these lines, which in general looks better,
but hides the square-border highlights,
so that you would have to rely on other forms of highlighting.
Setting the value to -1 makes XBoard choose a width by itself,
depending on the square size.
@item Use Board Textures
@itemx Light-Squares Texture File
@itemx Dark-Squares Texture File
@cindex Use Board Texture, Menu Item
@cindex Texture Files, Menu Item
When the option @samp{Use Board Textures} is set,
the squares will not be drawn as evenly colored surfaces,
but will be cut from a texture image, as specified by the
@samp{Texture Files}.
Separate images can be used for light and dark squares.
XBoard will try to cut the squares out of the texture image
with as little overlap as possible, so they all look different.
The name of the texture file can contain a size hint,
e.g. @code{xqboard-9x10.png}, alerting XBoard to the fact that
it contains a whole-board image, out of which squares have to
be cut in register with the nominal sub-division.
@item Use external piece bitmaps with their own color
@cindex Draw pieces with their own colors, Menu Item
When this option is on XBoard will ignore the piece-color settings,
and draw the piece images in their original colors.
The piece-color settings would only work well for evenly colored
pieces, such as the default theme.
@item Directory with Pieces Images
@cindex Piece-Image Directory, Menu Item
When a directory is specified here, XBoard will first look for
piece images (SVG or PNG files) in that directory,
and fall back on the image from the default theme only for
images it cannot find there.
An image file called White/BlackTile in the directory will be prefered
as fall-back for missing pieces over the default image, however.
@item Selectable themes
@itemx New name for current theme
@cindex Board Themes, Menu Item
@cindex Theme name, Menu Item
When a theme name is specified while pressing 'OK',
the combination of settings specified in the dialog
will be stored in XBoard's list of themes,
which will be saved with the other options in the settings file
(as the @code{themeNames} option).
This name will then appear in the selection listbox next time
you open the dialog,
so that you can recall the entire combination of settings
by double-clicking it.


Here you can specify the directory from which piece images should be taken,
when you don't want to use the built-in piece images
(see @code{pieceImageDirectory} option),
external images to be used for the board squares
(@code{liteBackTextureFile} and @code{darkBackTextureFile} options),
and square and piece colors for the default pieces.
The current combination of these settings can be assigned a 'theme' name
by typing one in the text entry in the lower-left of the dialog,
and closing the latter with OK.
It will then appear in the themes listbox next time you open the dialog,
where you can recall the complete settings combination with a double-click.
@item Fonts
@cindex Fonts, Menu Item
Pops up a dialog where you can set the fonts used in the main elements of various windows.
Pango font names can be typed for each window type,
and behind each text entry there are buttons to adjust the point size,
and toggle the 'bold' or 'italic' attributes of the font.
@item Game List Tags
@cindex Game List Tags, Menu Item
a duplicate of the Game List dialog in the Options menu.
@end table

@node Mode Menu
@section Mode Menu
@cindex Menu, Mode
@cindex Mode Menu
@table @asis
@item Machine White
@cindex Machine White, Menu Item
Tells the chess engine to play White. 
The @kbd{Ctrl-W} key is a keyboard equivalent.
@item Machine Black
@cindex Machine Black, Menu Item
Tells the chess engine to play Black.
The @kbd{Ctrl-B} key is a keyboard equivalent.
@item Two Machines
@cindex Two Machines, Menu Item
Plays a game between two chess engines.
The @kbd{Ctrl-T} key is a keyboard equivalent.
@item Analysis Mode
@cindex Analysis Mode, Menu Item
@cindex null move
@cindex move exclusion
XBoard tells the chess engine to start analyzing the current game/position
and shows you the analysis as you move pieces around.
The @kbd{Ctrl-A} key is a keyboard equivalent.
Note: Some chess engines do not support Analysis mode.

To set up a position to analyze, you do the following:

1. Set up the position by any means. (E.g. using @samp{Edit Position}
mode, pasing a FEN or loading a game and stepping to the position.)

2. Select Analysis Mode from the Mode Menu to start the analysis.

You can now play legal moves to create follow-up positions for the
engine to analyze, while the moves will be remembered as a stored game,
and then step backward through this game to take the moves back.
Note that you can also click on the clocks to set the opposite
side to move (adding a so-called @samp{null move} to the game).

You can also tell the engine to exclude some moves from analysis.
(Engines that do not support the exclude-moves feature will
ignore this, however.)
The general way to do this is to play the move you want to exclude
starting with a double click on the piece.
When you use drag-drop moving, the piece you grab with a double click
will also remain on its square, to show you that you are not really
making the move, but just forbid it from the current position.
Playing a thus excluded move a second time will include it again.
Excluded moves will be listed as text in a header line in the
Engine Output window, and you can also re-include them by
right-clicking them there.
This header line will also contain the words 'best' and 'tail';
right-clicking those will exclude the currently best move,
or all moves not explicitly listed in the header line.
Once you leave the current position all memory of excluded
moves will be lost when you return there.


Selecting this menu item while already in @samp{Analysis Mode} will
toggle the participation of the second engine in the analysis.
The output of this engine will then be shown in the lower pane
of the Engine Output window.
The analysis function can also be used when observing games on an ICS
with an engine loaded (zippy mode); the engine then will analyze
the positions as they occur in the observed game.

@item Analyze Game
@cindex Analyze Game, Menu Item
This option subjects the currently loaded game to automatic
analysis by the loaded engine.
The @kbd{Ctrl-G} key is a keyboard equivalent.
XBoard will start auto-playing the game from the currently displayed position,
while the engine is analyzing the current position.
The game will be annotated with the results of these analyses.
In particlar, the score and depth will be added as a comment,
and the PV will be added as a variation.

Normally the analysis would stop after reaching the end of the game.
But when a game is loaded from a multi-game file
while @samp{Analyze Game} was already switched on,
the analysis will continue with the next game in the file
until the end of the file is reached (or you switch to another mode).

The time the engine spends on analyzing each move can be controlled
through the command-line option @samp{-timeDelay},
which can also be set from the @samp{Load Game Options} menu dialog.
Note: Some chess engines do not support Analysis mode.
@item Edit Game
Duplicate of the item in the Edit menu.
Note that @samp{Edit Game} is the idle mode of XBoard, and can be used
to get you out of other modes. E.g. to stop analyzing, stop a game
between two engines or stop editing a position.
@item Edit Position
Duplicate of the item in the Edit menu.
@item Training
@cindex Training, Menu Item
Training mode lets you interactively guess the moves of a game for one
of the players. You guess the next move of the game by playing the
move on the board. If the move played matches the next move of the
game, the move is accepted and the opponent's response is auto-played.
If the move played is incorrect, an error message is displayed.  You
can select this mode only while loading a game (that is, after
selecting @samp{Load Game} from the File menu).  While XBoard is in 
@samp{Training} mode, the navigation buttons are disabled.
@item ICS Client
@cindex ICS Client, Menu Item
This is the normal mode when XBoard
is connected to a chess server.  If you have moved into
Edit Game or Edit Position mode, you can select this option to get out.

To use xboard in ICS mode, run it in the foreground with the -ics
option, and use the terminal you started it from to type commands and
receive text responses from the chess server.  See
@ref{Chess Servers} below for more information.

XBoard activates some special position/game editing features when you
use the @kbd{examine} or @kbd{bsetup} commands on ICS and you have
@samp{ICS Client} selected on the Mode menu.  First, you can issue the
ICS position-editing commands with the mouse.  Move pieces by dragging
with mouse button 1.  To drop a new piece on a square, press mouse
button 2 or 3 over the square.  This brings up a menu of white pieces
(button 2) or black pieces (button 3).  Additional menu choices let
you empty the square or clear the board.  Click on the White or Black
clock to set the side to play.  You cannot set the side to play or
drag pieces to arbitrary squares while examining on ICC, but you can
do so in @kbd{bsetup} mode on FICS.  In addition, the menu commands
@samp{Forward}, @samp{Backward}, @samp{Pause}, and @samp{Stop Examining}
have special functions in this mode; see below.
@item Machine Match
@cindex Machine match, Menu Item
Starts a match between two chess programs,
with a number of games and other parameters set through
the @samp{Tournament Options} menu dialog.
When a match is already running, selecting this item will make
XBoard drop out of match mode after the current game finishes.
@item Pause
@cindex Pause, Menu Item
Pauses updates to the board, and if you are playing against a chess engine,
also pauses your clock. To continue, select @samp{Pause} again, and the
display will automatically update to the latest position.
The @samp{P} button and keyboard @kbd{Pause} key are equivalents.

If you select Pause when you are playing against a chess engine and
it is not your move, the chess engine's clock
will continue to run and it will eventually make a move, at which point
both clocks will stop. Since board updates are paused, however,
you will not see the move until you exit from Pause mode (or select Forward).
This behavior is meant to simulate adjournment with a sealed move.

If you select Pause while you are observing or examining a game on a
chess server, you can step backward and forward in the current history
of the examined game without affecting the other observers and
examiners, and without having your display jump forward to the latest
position each time a move is made. Select Pause again to reconnect
yourself to the current state of the game on ICS.

If you select @samp{Pause} while you are loading a game, the game stops
loading. You can load more moves manually by selecting @samp{Forward}, or
resume automatic loading by selecting @samp{Pause} again.
@end table

@node Action Menu
@section Action Menu
@cindex Menu, Action
@cindex Action, Menu
@table @asis
@item Accept
@cindex Accept, Menu Item
Accepts a pending match offer. 
The @kbd{F3} key is a keyboard equivalent.
If there is more than one offer
pending, you will have to type in a more specific command
instead of using this menu choice.
@item Decline
@cindex Decline, Menu Item
Declines a pending offer (match, draw, adjourn, etc.).
The @kbd{F4} key is a keyboard equivalent. If there
is more than one offer pending, you will have to type in a more
specific command instead of using this menu choice.
@item Call Flag
@cindex Call Flag, Menu Item
Calls your opponent's flag, claiming a win on time, or claiming
a draw if you are both out of time. 
The @kbd{F5} key is a keyboard equivalent.
You can also call your
opponent's flag by clicking on his clock.
@item Draw
@cindex Draw, Menu Item
Offers a draw to your opponent, accepts a pending draw offer
from your opponent, or claims a draw by repetition or the 50-move
rule, as appropriate. The @kbd{F6} key is a keyboard equivalent.
@item Adjourn
@cindex Adjourn, Menu Item
Asks your opponent to agree to adjourning the current game, or
agrees to a pending adjournment offer from your opponent.
The @kbd{F7} key is a keyboard equivalent.
@item Abort
@cindex Abort, Menu Item
Asks your opponent to agree to aborting the current game, or
agrees to a pending abort offer from your opponent.
The @kbd{F8} key is a keyboard equivalent. An aborted
game ends immediately without affecting either player's rating.
@item Resign
@cindex Resign, Menu Item
Resigns the game to your opponent. The @kbd{F9} key is a
keyboard equivalent.
@item Stop Observing
@cindex Stop Observing, Menu Item
Ends your participation in observing a game, by issuing the ICS
observe command with no arguments. ICS mode only.
The @kbd{F10} key is a keyboard equivalent.
@item Stop Examining
@cindex Stop Examining, Menu Item
Ends your participation in examining a game, by issuing the ICS
unexamine command. ICS mode only.
The @kbd{F11} key is a keyboard equivalent.
@item Upload to Examine
@cindex Upload to Examine, Menu Item
Create an examined game of the proper variant on the ICS,
and send the game there that is currenty loaded in XBoard
(e.g. through pasting or loading from file).
You must be connected to an ICS for this to work.
@item Adjudicate to White
@itemx Adjudicate to Black
@itemx Adjudicate Draw
@cindex Adjudicate to White, Menu Item
@cindex Adjudicate to Black, Menu Item
@cindex Adjudicate Draw, Menu Item
Terminate an ongoing game in Two-Machines mode (including match mode),
with as result a win for white, for black, or a draw, respectively.
The PGN file of the game will accompany the result string
by the comment "user adjudication".
@end table

@node Engine Menu
@section Engine Menu
@cindex Engine Menu
@cindex Menu, Engine
@table @asis
@item Edit Engine List
@cindex Edit Engine List, Menu Item
Opens a window that shows the list of engines registered for use
by XBoard, together with the options that would be used with them
when you would select them from the @samp{Load Engine} dialogs.
You can then edit this list, e.g. for re-ordering the engines,
or adding uncommon options needed by this engine
(e.g. to cure non-compliant behavior).

By editing you can also organize the engines into collapsible groups.
By sandwiching a number of engine lines between lines "# NAME" and "# end",
the thus enclosed engines will not initially appear in engine listboxes
of other dialogs, but only the single line "# NAME"
(where NAME can be an arbitrary text) will appear in their place.
Selecting that line will then show the enclosed engines in the listbox,
which recursively can contain other groups.
The line with the group name will still present as a header,
and selecting that line will collapse the group again,
and makes the listbox go back to displaying the surrounding group.
@item Load New 1st Engine
@itemx Load New 2nd Engine
@cindex Load New Engine, Menu Item
Pops up a dialog where you can select or specify an engine to be loaded.
You can even replace engines during a game, without disturbing that game.
(Beware that after loading an engine, XBoard will always be in Edit Game mode, 
so you will have to tell the new engine what to do before it does anything!)
@table @asis
@item Select engine from list
@cindex Select engine, Menu Item
The listbox shows the engines registered for use with XBoard before.
(This means XBoard has information on the engine type, whether it plays book etc.
in the engine list stored in its settings file.)
Double-clicking an engine here will load it and close the dialog.
The list can also contain groups, indicated by a starting '#' sign.
Double-clicking such a group will 'open' it,
and show the group contents in the listbox instead of the total list,
with the group name as header.
Double-clicking the header will 'close' the group again.
@item Nickname
@itemx Use nickname in PGN player tags of engine-engine games
@cindex Nickname, Menu Item
When a @samp{Nickname} is specified, the engine will appear under this name
in the @samp{Select Engine} listbox.
Otherwise the name there will be a tidied version of the engine command.
The user can specify if the nickname is also to be used in PGN tags;
normally the name engines report theselves would be used there.
@item Engine Command
@cindex Engine Command, Menu Item
The command needed to start the engine from the command line.
For compliantly installed engine this is usually just a single word,
the name of the engine package (e.g. 'crafty' or 'stockfish').
Some engines need additional parameters on the command line.
For engines that are not in a place where the system would expect them
a full pathname can be specified, and usually the browse button
for this oprion is the easiest way to obtain that.
@item Engine Directory
@cindex Engine Directory, Menu Item
Compliant engines could run from any directory,
and by default this option is proposed as '.', the current directory.
If a (path)name is specified here, XBoard will start the engine
in that directory.
If you make the field empty, it will try to derive the directory
from the engine command (if that was a path name).
@item UCI
@cindex UCI, Menu Item
When the @samp{UCI} checkbox is ticked XBoard will assume
the engine is of UCI type, and will invoke the corresponding adapter
(as specified in the @code{adapterCommand} option stored in its
settings file)to use it.
By default this adapter is Polyglot,
which must be installed from a separate package!
@item USI/UCCI
@cindex USI/UCCI, Menu Item
Ticking this checkbox informs XBoard that the engine is of USI or UCCI type
(as Shogi or Xiangqi engines often are).
This makes XBoard invoke an adapter to run the engines,
as specified by the @code{uxiAdapter} option stored in its settings file.
The UCI2WB program is an adapter that can handle both these engine types,
as well as UCI.
@item WB protocol v1
@cindex WB protocol v1, Menu Item
Ticking this checkbox informs XBoard the engine is using an old version (1)
of the communication protocol, so that it won't respond to a request
to interrogate its properties.
XBoard then won't even try that, saving you a wait of several seconds
each time the engine is started.
Do not use this on state-of-the-art engines,
as it would prevent XBoard from interrogating its capabilities,
so that many of its features might not work!
@item Must not use GUI book
@cindex Use GUI book, Menu Item
By default XBoard assumes engines are responsible for their own opening book,
but unticking this option makes XBoard consult its own book
(as per @samp{Opening-Book Filename}) on behalf of the engine.
@item Add this engine to the list
@cindex Add engine, Menu Item
By default XBoard would add the engine you specified,
with all the given options to its list of registered engines
(kept in its settings file), when you press 'OK'.
Next time you could then simply select it from the listbox,
or use the command "xboard -fe NICKNAME" to start XBoard with the
engine and accompanying options.
New engines are always added at the end of the existing list,
or, when you have opened a group in the @samp{Select Engine} listbox,
at the end of that group.
But can be re-ordered later with the aid
of the @samp{Edit Engine List} menu item.
When you untick this checkbox before pressing 'OK'
the engine will be loaded, but will not be added to the engine list.
@item Force current variant with this engine
@cindex Force variant with engine, Menu Item
Ticking this option will make XBoard automatically start the engine
in the current variant, even when XBoard was set for a different
variant when you loaded the engine.
Useful when the engine plays multiple variants,
and you specifically want to play one different from its primary one.
@end table

@item Engine #1 Settings
@itemx Engine #2 Settings
@cindex Engine #N Settings, Menu Item
Pop up a menu dialog to alter the settings specific to the applicable engine.
For each parameter the engine allows to be set,
a control element will appear in this dialog that can be used to alter the value.
Depending on the type of parameter (text string, number, multiple choice,
on/off switch, instantaneous signal) the appropriate control will appear,
with a description next to it.
XBoard has no idea what these values mean; it just passes them on to the engine.
How this dialog looks is completely determined by the engine,
and XBoard just passes it on to the user.
Many engines do not have any parameters that can be set by the user,
and in that case the dialog will be empty (except for the OK and cancel buttons).
UCI engines usually have many parameters. (But these are only visible with
a sufficiently modern version of the Polyglot adapter needed to run UCI engines,
e.g. Polyglot 2.0.1.) For native XBoard engines this is less common.

@item Common Settings
@cindex Common Settings, Menu Item
Pops up a menu dialog where you can set some engine parameters common to most engines,
such as hash-table size, tablebase cache size, maximum number of processors
that SMP engines can use.
The shifted @kbd{Alt+U} key is a keyboard equivalent.
Older XBoard/WinBoard engines might not respond to these settings,
but UCI engines always should.
@item Maximum Number of CPUs per Engine
@cindex Max. Number of CPUs, Menu Item
Specifies the number of search threads any engine can maximally use.
Do not set it to a number larger than the number of cores your computer has.
(Or half of it when you want two engines to run simultaneously,
as in a Two-Machines game with @samp{Ponder Next Move} on.)
@item Polyglot Directory
@item Hash-Table Size
@cindex Hash-Table Size
Specifies the maximum amount of memory (RAM) each engine is allowed to use
for storing info on positions it already searched,
so it would not have to search them again.
Do not set it so that it is more than half
(or if you use two engines, more than a quarter)
of the memory your computer has,
or it would slow the engines down by an extreme amount.
@item EGTB Path
@cindex EGTB Path, Menu Item
Sets the value of the @code{egtFormats} option, which specifies
where on your computer the files for End-Game Tables are stored.
It must be a comma-separated list of path names,
the path for each EGT flavor prefixed with the name of the latter
and a colon. E.g. "nalimov:/home/egt/dtm,syzygy:/home/egt/dtz50".
The path names after the colon will be sent to the engines
that say they can use the corresponding EGT flavor.
@item EGTB Cache Size
@cindex EGTB Cache Size, Menu Item
Specifies the amount of memory the engine should use to
buffer end-game information.
Together with the @samp{Hash-Table Size} this determines how
much memory the engine is allowed to use in total.
@item Use GUI Book
@itemx Opening-Book Filename
@cindex Use GUI Book, Menu Item
@cindex Opening-Book Filename, Menu Item
The @samp{Opening-Book Filename} specifies an opening book
in Polyglot format (usually a .bin file),
from which XBoard can play moves on behalf of the engine.
This is also the book file on which the @samp{Edit Book}
and @samp{Save Games as Book} menu items operate.
A checkbox @samp{Use GUI Book} can be used to temporarily
disable the book without losing the setting.
(This does not prevent editing or saving games on it!)
@item Book Depth
@itemx Book Variety
@cindex Book Depth, Menu Item
@cindex Book Variety, Menu Item
The way moves are selected from the book can be controlled by two options.
@samp{Book Depth} controls for how deep into the game the book
will be consulted (measured in full moves).
@samp{Book Variety} controls the likelihood of playing weaker moves.
When the variety is set to 50, moves will be played with the probability
specified in the book.
When set to 0, only the move(s) with the highest probability will be played.
When set to 100, all listed moves will be played with equal pobability.
Other settings interpolate between that.
@item Engine #1 Has Own Book
@itemx Engine #2 Has Own Book
@cindex Engine Has Own Book
These checkboxes control on a per-engine basis
whether XBoard will consult the opening book for them.
If ticked, XBoard will never play moves from its GUI book,
giving the engine the opportunity to use its own.
These options are automatically set whenever you load an engine,
based on the setting of @samp{Must not use GUI book}
when you installed that through the @samp{Load Engine} menu dialog.
@item Hint
@cindex Hint, Menu Item
Displays a move hint from the chess engine.
@item Book
@cindex Book, Menu Item
Displays a list of possible moves from the chess engine's opening
book.  The exact format depends on what chess engine you are using.
With GNU Chess 4, the first column gives moves, the second column
gives one possible response for each move, and the third column shows
the number of lines in the book that include the move from the first
column. If you select this option and nothing happens, the chess
engine is out of its book or does not support this feature.
@item Move Now
@cindex Move Now, Menu Item
Forces the chess engine to move immediately. Chess engine mode only.
The @kbd{Ctrl-M} key is a keyboard equivalent.
Many engines won't respond to this.
@item Retract Move
@cindex Retract Move, Menu Item
Retracts your last move. In chess engine mode, you can do this only
after the chess engine has replied to your move; if the chess engine is still
thinking, use @samp{Move Now} first. In ICS mode, @samp{Retract Move}
issues the command @samp{takeback 1} or @samp{takeback 2}
depending on whether it is your opponent's move or yours.
The @kbd{Ctrl-X} key is a keyboard equivalent.
@item Recently Used Engines
@cindex Recently Used Engines, In Menu
At the bottom of the engine menu there can be a list of names
of engines that you recently loaded through the Load Engine menu dialog
in previous sessions.
Clicking on such a name will load that engine as first engine,
so you won't have to search for it in your list of installed engines,
if that is very long.
The maximum number of displayed engine names is set by the
@code{recentEngines} command-line option.
@end table

@node Options Menu
@section Options Menu
@cindex Menu, Options
@cindex Options Menu
@section General Options
@cindex General Options, Menu Item
The following items to set option values appear in the dialog
summoned by the general Options menu item.
@table @asis
@item Absolute Analysis Scores
@cindex Absolute Analysis Scores, Menu Item
Controls if scores on the Engine Output window during analysis
will be printed from the white or the side-to-move point-of-view.
@item Almost Always Queen
@cindex Almost Always Queen, Menu Item
If this option is on, 7th-rank pawns automatically change into
Queens when you pick them up,
and when you drag them to the promotion square and release them there,
they will promote to that.
But when you drag such a pawn backwards first,
its identity will start to cycle through the other available pieces.
This will continue until you start to move it forward;
at which point the identity of the piece will be fixed,
so that you can safely put it down on the promotion square.
If this option is off, what happens depends on the
option @code{alwaysPromoteToQueen},
which would force promotion to Queen when true.
Otherwise XBoard would bring up a dialog
box whenever you move a pawn to the last rank, asking what piece
you want to promote to.
@item Animate Dragging
@cindex Animate Dragging, Menu Item
If Animate Dragging is on, while you are dragging a piece with the
mouse, an image of the piece follows the mouse cursor.
If Animate Dragging is off, there is no visual feedback while you are
dragging a piece, but if Animate Moving is on, the move will be
animated when it is complete. 
@item Animate Moving
@cindex Animate Moving, Menu Item
If Animate Moving is on, all piece moves are animated.  An image of the
piece is shown moving from the old square to the new square when the
move is completed (unless the move was already animated by Animate Dragging).
If Animate Moving is off, a moved piece instantly disappears from its
old square and reappears on its new square when the move is complete.
The shifted @kbd{Ctrl-A} key is a keyboard equivalent.
@item Auto Flag
@cindex Auto Flag, Menu Item
If this option is on and one player runs out of time
before the other,
XBoard
will automatically call his flag, claiming a win on time.
The shifted @kbd{Ctrl-F} key is a keyboard equivalent.
In ICS mode, Auto Flag will only call your opponent's flag, not yours,
and the ICS may award you a draw instead of a win if you have
insufficient mating material.  In local chess engine mode,
XBoard
may call either player's flag.
@item Auto Flip View
@cindex Auto Flip View, Menu Item
If the Auto Flip View option is on when you start a game, the board
will be automatically oriented so that your pawns move from the bottom
of the window towards the top.

If you are playing a game on an ICS, the board is always
oriented at the start of the game so that your pawns move from
the bottom of the window towards the top. Otherwise, the starting
orientation is determined by the @code{flipView} command line option;
if it is false (the default), White's pawns move from bottom to top
at the start of each game; if it is true, Black's pawns move from
bottom to top. @xref{User interface options}.
@item Blindfold
@cindex Blindfold, Menu Item
If this option is on, XBoard displays the board as usual but does
not display pieces or move highlights.  You can still move in the
usual way (with the mouse or by typing moves in ICS mode), even though
the pieces are invisible.
@item Drop Menu
@cindex Drop Menu, Menu Item
Controls if right-clicking the board in crazyhouse / bughouse
will pop up a menu to drop a piece on the clicked square
(old, deprecated behavior)
or allow you to step through an engine PV
(new, recommended behavior).
@item Enable Variation Trees
@cindex Enable Variation Trees, Menu Item
If this option is on, playing a move in Edit Game or Analyze mode
while keeping the Shift key pressed will start a new variation.
You can then recall the previous line through the @samp{Revert} menu item.
When off, playing a move will truncate the game and append the move
irreversibly.
@item Headers in Engine Output Window
@cindex Headers in Engine Output Window, Menu Item
Controls the presence of column headers above the variations and
associated information printed by the engine, on which you can issue
button 3 clicks to open or close the columns.
Available columns are search depth, score, node count, time used,
tablebase hits, search speed and selective search depth.
@item Hide Thinking
@cindex Hide Thinking, Menu Item
If this option is off, the chess engine's notion of the score and best
line of play from the current position is displayed as it is
thinking. The score indicates how many pawns ahead (or if negative,
behind) the chess engine thinks it is. In matches between two
machines, the score is prefixed by @samp{W} or @samp{B} to indicate
whether it is showing White's thinking or Black's, and only the thinking
of the engine that is on move is shown.
The shifted @kbd{Ctrl-H} key is a keyboard equivalent.
@item Highlight Last Move
@cindex Highlight Last Move, Menu Item
If Highlight Last Move is on, after a move is made, the starting and
ending squares remain highlighted. In addition, after you use Backward
or Back to Start, the starting and ending squares of the last move to
be unmade are highlighted.
@item Highlight with Arrow
@cindex Highlight with Arrow, Menu Item
Causes the highlighting described in Highlight Last Move to be done
by drawing an arrow between the highlighted squares,
so that it is visible even when the width of the grid lines is set to zero.
@item One-Click Moving
@cindex One-Click Moving, Menu Item
If this option is on, XBoard does not wait for you to click both the
from- and the to-square, or drag the piece, but performs a move as soon
as it is uniqely specified.
This applies to clicking an own piece that only has a single legal move,
clicking an empty square or opponent piece where only one of your pieces
can move (or capture) to.
Furthermore, a double-click on a piece that can only make a single capture
will cause that capture to be made.
Promoting a Pawn by clicking its to-square will suppress the promotion
popup or other methods for selecting an under-promotion, 
and make it promote to Queen.
@item Periodic Updates
@cindex Periodic Updates, Menu Item
If this option is off (or if
you are using a chess engine that does not support periodic updates),
the analysis window
will only be updated when the analysis changes. If this option is
on, the Analysis Window will be updated every two seconds.
@item Play Move(s) of Clicked PV
@cindex Play Move(s) of Clicked PV, Menu Item
If this option is on, right-clicking on the first move of a PV
or on the data fields left of it in the Engine Output window
during Analyze mode will cause the first move of that PV to be played.
You could also play more than one (or no) PV move by moving the mouse
to engage in the PV walk such a right-click will start,
to seek out another position along the PV where you want to continue
the analysis, before releasing the mouse button.
Clicking on later moves of the PV only temporarily show the moves
for as long you keep the mouse button down,
without adding them to the game.
@item Ponder Next Move
@cindex Ponder Next Move, Menu Item
If this option is off, the chess engine will think only when it is on
move.  If the option is on, the engine will also think while waiting
for you to make your move.
The shifted @kbd{Ctrl-P} key is a keyboard equivalent.
@item Popup Exit Message
@cindex Popup Exit Message, Menu Item
If this option is on, when XBoard wants to display a message just
before exiting, it brings up a modal dialog box and waits for you to
click OK before exiting.  If the option is off, XBoard prints the
message to standard error (the terminal) and exits immediately.
@item Popup Move Errors
@cindex Popup Move Errors, Menu Item
If this option is off, when you make an error in moving (such as
attempting an illegal move or moving the wrong color piece), the
error message is displayed in the message area.  If the option is
on, move errors are displayed in small pop-up windows like other errors.
You can dismiss an error pop-up either by clicking its OK button or by
clicking anywhere on the board, including down-clicking to start a move.
@item Scores in Move List
@cindex Scores in Move List, Menu Item
If this option is on, XBoard will display the depth and score
of engine moves in the Move List, in the format of a PGN comment.
@item Show Coords
@cindex Show Coords, Menu Item
If this option is on, XBoard displays algebraic coordinates
along the board's left and bottom edges.
@item Show Target Squares
@cindex Show Target Squares, Menu Item
If this option is on, all squares a piece that is 'picked up' with the mouse
can legally move to are highighted with a fat colored dot in
yellow (non-captures) or red (captures).
Special moves might have other colors
(e.g. magenta for promotion, cyan for a partial move).
Legality testing must be on for XBoard to know how the piece moves,
but with legality testing off some engines would offer this information.
@item Sticky Windows
@cindex Sticky Windows, Menu Item
Controls whether the auxiliary windows such as Engine Output, Move History
and Evaluation Graph should keep touching XBoard's main window when
you move the latter.
@item Test Legality
@cindex Test Legality, Menu Item
If this option is on, XBoard tests whether the moves you try to make
with the mouse are legal and refuses to let you make an illegal move.
The shifted @kbd{Ctrl-L} key is a keyboard equivalent.
Moves loaded from a file with @samp{Load Game} are also checked.  If
the option is off, all moves are accepted, but if a local chess engine
or the ICS is active, they will still reject illegal moves.  Turning
off this option is useful if you are playing a chess variant with
rules that XBoard does not understand.  (Bughouse, suicide, and wild
variants where the king may castle after starting on the d file are
generally supported with Test Legality on.)
@item Top-Level Dialogs
@cindex Top-Level Dialogs, Menu Item
Controls whether the auxiliary windows will appear as icons in the
task bar and independently controllable, or whether they open and
minimize all together with the main window.
@item Flash Moves
@itemx Flash Rate
@cindex Flash Moves, Menu Item
@cindex Flash Rate, Menu Item
If this option is non-zero, whenever a move is completed, 
the moved piece flashes the specified number of times.
The flash-rate setting determines how rapidly this flashing occurs.
@item Animation Speed
@cindex Animation Speed, Menu Item
Determines the duration (in msec) of an animation step,
when @samp{Animate Moving} is swiched on.
@item Zoom factor in Evaluation Graph
@cindex Zoom factor in Evaluation Graph, Menu Item
Sets the value of the @code{evalZoom} option,
indicating the factor by which the score interval (-1,1) should be
blown up on the vertical axis of the Evaluation Graph.
@end table
@section Time Control
@cindex Time Control, Menu Item
Pops up a sub-menu where you can set the time-control parameters interactively.
The shifted @kbd{Alt+T} key is a keyboard equivalent.
@table @asis
@item classical
@cindex classical, Menu Item
Selects classical TC,
where the game is devided into sessions of a certain number of moves,
and after each session the start time is again added to the clocks.
@item incremental
@cindex incremental, Menu Item
Selects a TC mode where the game will start with a base time on the clocks,
and after every move an 'increment' will be added to it.
@item fixed max
@cindex fixed max, Menu Item
Selects a TC mode where you have to make each move within a given time,
and any left-over time is not carried over to the next move.
@item Divide entered times by 60
@cindex Divide entered times by 60, Menu Item
To allow entering of sub-minute initial time or sub-second increment,
you can tick this checkbox.
The initial time can then be entered in seconds,
and the increment in units of 1/60 second.
@item Moves per session
@cindex Moves per session, Menu Item
Sets the duration of a session for classical time control.
@item Initial time
@cindex Initial time, Menu Item
Time initially on the clock in classical or incremental time controls.
In classical time controls this time will also be added to the clock
at the start of ach new session.
@item Increment or max
@cindex Increment or max, Menu Item
Time to be added to the clock after every move in incremental TC mode.
Fore 'fixed maximum' TC mode, the clock will be set to this time
before every move, irrespective of how much was left on that clock.
@item Time-Odds factors
@cindex Time-Odds factors, Menu Item
When these options are set to 1 the clocks of the players will be set
according to the other specified TC parameters.
Players can be given unequal times by specifying a time-odds factor
for one of them (or a different factor for both of them).
Any time received by that player will then be divided by that factor.
@end table

@section Adjudications
@cindex Adjudications, Menu Item
Pops up a sub-menu where you can enable or disable various adjudications
that XBoard can perform in engine-engine games.
The shifted @kbd{Alt+J} key is a keyboard equivalent.
@table @asis
@item Detect all Mates
@cindex Detect all Mates, Menu Item
When this option is set
XBoard will terminate the game on checkmate or stalemate,
even if the engines would not do so.
Only works when @samp{Test Legality} is on.
@item Verify Engine Result Claims
@cindex Verify Engine Result Claims, Menu Item
When this option is set
XBoard will verify engine result claims,
(forfeiting engines that make false claims),
rather than naively beleiving the engine.
Only works when @samp{Test Legality} is on.
@item Draw if Insufficient Mating Material
@cindex Draw if Insufficient Mating Material, Menu Item
When this option is set
XBoard will terminate games with a draw result
when so little material is left
that checkmate is not longer possible.
In normal Chess this applies to KK, KNK, KBK
and some positions with multiple Bishops all on the same
square shade.
Only works when @samp{Test Legality} is on.
@item Adjudicate Trivial Draws
@cindex Adjudicate Trivial Draws, Menu Item
When this option is set
XBoard will terminate games with a draw result
in positions that could only be won against an idiot.
In normal Chess this applies to KNNK, KRKR, KBKN, KNKN,
and KBKB with Bishops on different square shades.
KQKQ will also be adjudicated a draw (possibly unjustly so).
Only works when @samp{Test Legality} is on.
@item N-Move Rule
@cindex N-Move Rule, Menu Item
When this option is set to a value differnt from zero
XBoard will terminate games with a draw result
after the specified number of reversible moves
(i.e. without captures or pawn pushes) is made.
@item N-fold Repeats
@cindex N-fold Repeats, Menu Item
When this option is set to a value larger than 1,
XBoard will terminate games with a draw result when
the same position has occurred the specified number of times.
@item Draw after N Moves Total
@cindex Draw after N Moves Total, Menu Item
When this option is set to a value different from zero,
XBoard will terminate games with a draw result
after that many moves have been played.
Useful in automated engine-engine matches,
to prevent one game between stubborn engines will soak up
all your computer time.
@item Win / Loss Threshold
@cindex Win / Loss Threshold, Menu Item
When this option is set to a value different from zero,
XBoard will terminate games as a win when both engines
agree the score is above the specified value
(interpreted as centi-Pawn)
for three successive moves.
@item Negate Score of Engine #1
@itemx Negate Score of Engine #2
@cindex Negate Score of Engine, Menu Item
These options should be used with engines
that report scores from the white point of view,
rather than the side-to-move POV as XBoard would otherwise
assume when adjudicating games based on the engine score.
When the engine is installed with the extra option
@code{firstScoreIsAbs} true in the engine list
the option would be automatically set when the engine is
loaded throuhgh the Engine menu,
or with the @code{fe} or @code{se} command-line option.
@end table

@section ICS Options
@cindex ICS Options, Menu Item
Pops up a menu dialog where options can be set that affect
playing against an Internet Chess Server.
@table @asis
@item Auto-Kibitz
@cindex Auto-Kibitz, Menu Item
Setting this option when playing with or aginst a chess program on an ICS
will cause the last line of thinking output of the engine before its move
to be sent to the ICS in a kibitz command.
In addition, any kibitz message received through the ICS from
an opponent chess program will be diverted to the engine-output window,
(and suppressed in the console),
where you can play through its PV by right-clicking it.
@item Auto-Comment
@cindex Auto-Comment, Menu Item
If this option is on, any remarks made on ICS while you are observing or
playing a game are recorded as a comment on the current move.  This includes
remarks made with the ICS commands @kbd{say}, @kbd{tell}, @kbd{whisper},
and @kbd{kibitz}.
Limitation: remarks that you type yourself are not recognized;
XBoard scans only the output from ICS, not the input you type to it.
@item Auto-Observe
@cindex Auto-Observe, Menu Item
If this option is on and you add a player to your @code{gnotify}
list on ICS, XBoard will automatically observe all of that
player's games, unless you are doing something else (such as
observing or playing a game of your own) when one starts.
The games are displayed 
from the point of view of the player on your gnotify list; that is, his
pawns move from the bottom of the window towards the top.
Exceptions:  If both players in a game are on your gnotify list, if
your ICS 
@code{highlight}
variable is set to 0, or if the ICS you are using does not 
properly support observing from Black's point of view,
you will see the game from White's point of view.
@item Auto-Raise Board
@cindex Auto Raise Board, Menu Item
If this option is on, whenever a new game begins, the chessboard window
is deiconized (if necessary) and raised to the top of the stack of windows.
@item Auto Save
@cindex Auto Save, Menu Item
If this option is true, at the end of every game XBoard prompts
you for a file name and appends a record of the game to the file
you specify. 
Disabled if the @code{saveGameFile} command-line
option is set, as in that case all games are saved to the specified file.
@xref{Load and Save options}.
@item Background Observe while Playing
@cindex Background Observe while Playing, Menu Item
Setting this option will make XBoard suppress display of any boards
from observed games while you are playing.
Instead the last such board will be remembered,
and shown to you when you right-click the board.
This allows you to peek at your bughouse partner's game when you want,
without disturbing your own game too much.
@item Dual Board for Background-Observed Game
@cindex Dual Board for Background-Observed Game, Menu Item
Setting this option in combination with @samp{Background Observe}
will display boards of observed games while you are playing
on a second board next to that of your own game.
@item Get Move List
@cindex Get Move List, Menu Item
If this option is on, whenever XBoard
receives the first board of a new ICS game (or a different game from
the one it is currently displaying), it
retrieves the list of past moves from the ICS.
You can then review the moves with the @samp{Forward} and @samp{Backward}
commands
or save them with @samp{Save Game}.  You might want to
turn off this option if you are observing several blitz games at once,
to keep from wasting time and network bandwidth fetching the move lists over
and over.
When you turn this option on from the menu, XBoard
immediately fetches the move list of the current game (if any).
@item Quiet Play
@cindex Quiet Play, Menu Item
If this option is on, XBoard will automatically issue an ICS
@kbd{set shout 0}
command whenever you start a game and a
@kbd{set shout 1}
command whenever you finish one.  Thus, you will not be distracted
by shouts from other ICS users while playing.
@item Seek Graph
@cindex Seek Graph, Menu Item
Setting this option will cause XBoard to display an graph of
currently active seek ads when you left-click the board
while idle and logged on to an ICS.
@item Auto-Refresh Seek Graph
@cindex Auto-Refresh Seek Graph, Menu Item
In combination with the @samp{Seek Graph} option this
will cause automatic update of the seek graph while it is up.
This only works on FICS and ICC,
and requires a lot of bandwidth on a busy server.
@item Auto-InputBox PopUp
@cindex Auto-InputBox PopUp, Menu Item
Controls whether the ICS Input Box will pop up automatically when
you type a printable character to the board window in ICS mode.
@item Quit After Game
@cindex Quit After Game, Menu Item
Controls whether XBoard will automatically disconnect from the ICS
and close when the game currently in progress finishes.
@item Premove
@itemx Premove for White
@itemx Premove for Black
@itemx First White Move
@itemx First Black Move
@cindex Premove, Menu Item
@cindex Premove for White, Menu Item
@cindex Premove for Black, Menu Item
@cindex First White Move, Menu Item
@cindex First Black Move, Menu Item
If the @samp{Premove} option is on while playing a game on an ICS,
you can register your next planned move before it is your turn.
Move the piece with
the mouse in the ordinary way, and the starting and ending squares
will be highlighted with a special color (red by default).  When it is
your turn, if your registered move is legal, XBoard will send it to
ICS immediately; if not, it will be ignored and you can make a
different move.  If you change your mind about your premove, either
make a different move, or double-click on any piece to cancel the move
entirely.

You can also enter premoves for the first white and black moves
of the game.
@item Alarm
@itemx Alarm Time
@cindex Alarm, Menu Item
@cindex Alarm Time, Menu Item
When this option is on, an alarm sound is played when your clock
counts down to the @samp{Alarm Time} in an ICS game.
(By default, the time is 5 seconds, but you can specify other values
with the Alarm Time spin control.) 
For games with time controls that include an increment, the
alarm will sound each time the clock counts down to the icsAlarmTime.
By default, the alarm sound is the terminal bell, but on some systems
you can change it to a sound file using the soundIcsAlarm option; see
below.
@item Colorize Messages
@cindex Colorize Messages, Menu Item
Ticking this options causes various types of ICS messages do be
displayed with different foreground or background colors in the console.
The colors can be individually selected for each type,
through the accompanying text edits.
@item -icsMenu string
@cindex icsMenu, option
The string defines buttons for the @samp{ICS text menu}.
Each button definition consists of two semi-colon-terminated pieces of text,
the first giving the label to be written on the button,
the second the text that should be sent to the ICS when that button is pressed.
This second part (the 'message') can contain linefeeds, so that you can send
multiple ICS commands with one button.
Some message in the text, all starting with a $-sign, are treated special.
When the message contains '$input', it will not be sent directly to the ICS,
but will be put in the input field of the @samp{ICS Chat/Console},
with the text cursor at the indicated place, so you can addsome text to
the message before sending it off.
If such a message starts with '$add' it will be placed behind any text
that is already present in the input field, otherwise this field will
be cleared first.
The word '$name' occurring in the message will be replaced by the word
that was clicked (through button 3) in the ICS Chat/Console.
There are two special messages: '$chat' will open a new chat with
the clicked word in the chat-partner field,
while '$copy' will copy the text that is currently-selected
in the ICS Console to the clipboard.
An example of a text menu as it might occur in your settings file
(where you could edit it):

@example
-icsMenu @{copy;$copy;
list players;who;
list games;games;
finger (player);finger $name;
bullet (player);match $name 1 1 r;
blitz (player);match $name 5 1 r;
rapid (player);match $name 30 0 r;
open chat (player);$chat;
tell (player);tell $name $input;
ask pieces;ptell Please give me a $input;
P;$add Pawn $input;
N;$add Knight $input;
B;$add Bishop $input;
R;$add Rook $input;
Q;$add Queen $input;
@}
@end example
@end table

@section Tournament Options
@cindex Tournament Options, Menu Item
Summons a dialog where you can set options important for playing automatic 
matches between two or more chess programs 
(e.g. by using the @samp{Machine Match} menu item in the @samp{Mode} menu).
@table @asis
@item Tournament file
@cindex Tournament file, Menu item
To run a tournament, XBoard needs a file to record its progress, 
so it can resume the tourney when it is interrupted.
When you want to conduct anything more complex than a simple 
two-player match with the currently loaded engines, 
(i.e. when you select a list of participants), 
you must not leave this field blank. 
When you enter the name of an existing tournament file, 
XBoard will ignore all other input specified in the dialog, 
and will take the corresponding info from that tournament file.
This resumes an interrupted tournament, or adds another XBoard
agent playing games for it to those that are already doing so.
Specifying a not-yet-existing file will cause XBoard to create it, 
according to the tournament parameters specified in the rest of the dialog, 
before it starts the tournament on ‘OK’. 
Provided that you specify participants; 
without participants no tournament file will be made, but other entered values 
(e.g. for the file with opening positions) will take effect. 
Default: configured by the @code{defaultTourneyName} option.
@item Sync after round
@itemx Sync after cycle
@cindex Sync after round, Menu Item
@cindex Sync after cycle, Menu Item
The sync options, when on, will cause WinBoard to refrain from starting games 
of the next round or cycle before all games of the previous round or cycle are finished.
This guarantees correct ordering in the games file,
even when multiple XBoard instances are concurrently playing games for the same tourney.
Default: sync after cycle, but not after round.
@item Select Engine
@itemx Tourney participants
@cindex Select Engine, Menu Item
@cindex Tourney participants, Menu Item
From the Select Engine listbox you can pick an engine from your list 
of engines registered in the settings file, to be added to the tournament.
The engines selected so far will be listed in the ‘Tourney participants’ memo. 
The latter is a normal text edit, so you can use normal text-editing functions 
to delete engines you selected accidentally, or change their order. 
Typing names here yourself is not recommended, because names that do not exactly match 
one of the names from the selection listbox will lead to undefined behavior.
@item Tourney type
@cindex Tourney type, Menu Item
Here you can specify the type of tournament you want. 
XBoard’s intrinsic tournament manager support round-robins (type = 0), 
where each participant plays every other participant, and (multi-)gauntlets, 
where one (or a few) so-called ‘gauntlet engines’ play an independent set of opponents. 
In the latter case, you specify the number of gauntlet engines. 
E.g. if you specified 10 engines, and tourney type = 2, 
the first 2 engines each play the remaining 8. 
A value of -1 instructs XBoard to play Swiss; for this to work an external
pairing engine must be specified through the @code{pairingEngine} option.
Each Swiss round will be considered a tourney cycle in that case.
Default:0
@item Number of tourney cycles
@itemx Default number of Games
@cindex Number of tourney cycles, Menu Item
@cindex Default number of Games, Menu Item
You can specify tourneys where every two opponents play each other multiple times. 
Such multiple games can be played in a row, 
as specified by the ‘number of games per pairing’, 
or by repeating the entire tournament schedule a number of times 
(specified by the ‘number of tourney cycles’). 
The total number of times two engines meet will be the product of these two. 
Default is 1 cycle;
the number of games per pairing is the same as the default number of match games, 
stored in your settings file through the @code{defaultMatchGames} option.
@item Save Tourney Games
@cindex Save Tourney Games, Menu Item
File where the tournament games are saved
(duplicate of the item in the @samp{Save Game Options}).
@item Game File with Opening Lines
@itemx File with Start Positions
@itemx Game Number
@itemx Position Number
@itemx Rewind Index after
@cindex Game File with Opening Lines, Menu Item
@cindex File with Start Positions, Menu Item
@cindex Game Number, Menu Item
@cindex Position Number, Menu Item
@cindex Rewind Index after, Menu Item
These items optionally specify the file with move sequences or board positions the tourney 
games should start from.
The corresponding numbers specify the number of the game or position in the file.
Here a value -1 means automatic stepping through all games on the file,
-2 automatic stepping every two games.
The Rewind-Index parameter causes a stepping index to reset to one after reaching
a specified value.
A setting of -2 for the game number will also be effective in a tournament without
specifying a game file, but playing from the GUI book instead.
In this case the first (odd) games will randomly select from the book,
but the second (even) games will select the same moves from the book as the previous game.
(Note this leads to the same opening only if both engines use the GUI book!)
Default: No game or position file will be used. The default index if such a file is used is 1.
@item Disable own engine books be default
@cindex Disable own engine books be default, Menu Item
Setting this option reverses the default situation for use of the GUI opening book
in tournaments from what it normally is, namely not using it.
So unless the engine is installed with an option to explicitly specify it should
not use the GUI book (i.e. @code{-firstHasOwnBookUCI true}),
it will be made to use the GUI book.
@item Replace Engine
@itemx Upgrade Engine
@cindex Replace Engine, Menu Item
@cindex Upgrade Engine, Menu Item
With these two buttons you can alter the participants of an already running tournament.
After opening the Match Options dialog on an XBoard that is playing for the tourney,
you will see all the tourney parameters in the dialog fields.
You can then replace the name of one engine by that of another
by editing the @samp{participants} field.
(But preserve the order of the others!)
Pressing the button after that will cause the substitution.
With the @samp{Upgrade Engine} button the substitution will only affect future games.
With @samp{Replace Engine} all games the substituted engine has already played will
be invalidated, and they will be replayed with the substitute engine.
In this latter case the engine must not be playing when you do this,
but otherwise there is no need to pause the tournament play
for making a substitution.
@item Clone Tourney
@cindex CloneTourney, Menu Item
Pressing this button after you have specified an existing tournament file
will copy the contents of the latter to the dialog,
and then puts the originally proposed name for the tourney file back.
You can then run a tourney with the same parameters
(possibly after changing the proposed name of the tourney file for the new tourney)
by pressing 'OK'.
@item Continue Later
@cindex Continue Later, Menu Item
Pressing the @samp{Continue Later} button confirms the current value of all
items in the dialog and closes it,
but will not automatically start the tournament.
This allows you to return to the dialog later without losing the settings you
already entered, to adjust paramenters through other menu dialogs.
(The @samp{Common Engine Setting}, @samp{Time Control} and @samp{General Options}
dialogs can be accessed without closing the @samp{Tournament Options} dialog
through the respective buttons at the bottom of the latter.)
@end table

@section Load Game Options
@cindex Load Game Options, Menu Item
Summons a dialog where you can set options that control loading of games.
@table @asis
@item Auto-Display Tags
@cindex Auto-Display Tags, Menu Item
Setting this option causes a window to pop up on loading a game,
displaying the PGN Tags for that game.
@item Auto-Display Comment
@cindex Auto-Display Comment, Menu Item
Setting this option causes a window to pop up whenever there
is a comment to (or variation on) the currently displayed move.
@item Auto-Play speed of loaded games
@cindex Auto-Play speed, Menu Item
This option sets the number of seconds between moves
when a newly loaded game is auto-playing.
A decimal fraction on the number is understood.
Setting it to -1 disables auto-play, staying in the start position
of the game after the loading completes.
Setting it to 0 will instantly move to the final position of the game.
The @samp{Auto-Play speed} is also used to determine the
analysis time for each move during @samp{Analyze Game}.
Note that auto-playing (including game analysis) can be stopped at any
time through the @samp{P} button above the board.
@item options to use in game-viewer mode
@cindex Game-Viewer options, Menu Item
Specifies the options automatically set when XBoard is invoked
with the option @code{-viewer} on its command line,
as will happen when it is started in response to clicking a PGN game file.
The default setting would start XBoard without engine
(due to the @code{-ncp} option),
but if you want it to automatically start with your favorite engine,
and automatically start analyzing, you could include the necessary
options for that here (e.g. @code{-fe <engine> -initialMode analysis}).
@item Thresholds for position filtering in game list
@cindex Thresholds for game selection, Menu Item
The following options can be set to limit the display of games
in the @samp{Game List} window to a sub-set,
meeting the specified criteria.
@item Elo of strongest player at least
@item Elo of weakest player at least
@cindex Elo limits, Menu Item
Games with an Elo tag specifying a lower rating for the mentioned player
will not be diplayed in the @samp{Game List}. 
@item No games before year
@cindex Date limit, Menu item
Games with a Date tag before the specified year
will not be diplayed in the @samp{Game List}. 
@item Final nr of pieces
@cindex Final number of pieces, Menu Item
A single number or a range (like 8-10) can be entered here,
and will cause only games where the number of men in the final
position is in the given range
will be diplayed in the @samp{Game List}. 
@item Minimum nr consecutive positions
@cindex Consecutive positions, Menu Item
Specifies for how many consecutive positions the more fuzzy
position-matching criteria have to be satisfied
in order to count as a match.
@item Search mode
@itemx find position
@cindex Search mode, Menu Item
@cindex find position, Menu Item
XBoard can select games for display in the @samp{Game List}
based on whether (in addition to the conditions on the PGN tags)
they contain a position that matches the
position currently displayed on the board,
by pressing the @samp{find position}
or @samp{narrow} buttons in the @samp{Game List} window.
The @samp{Search mode} setting determines what counts as match.
You can search for an exact match, 
a position that has all shown material in the same place, 
but might contain additional material,
a position that has all Pawns in the same place,
but can have the shown material anywhere,
a position that can have all shown material anywhere,
or a position that has material between certain limits anywhere.
For the latter you have to place the material that must minimally be present
in the four lowest ranks of the board,
and optional additional material in the four highest ranks of the board.
You can request the optional material to be balanced,
i.e. equal for white and black.
@item narrow
@cindex narrow, Menu Item
The @samp{narrow} button is similar in fuction to the @samp{find position} button,
but only searches in the already selected games,
rather than the complete game file,
and can thus be used to refine a search based on multiple criteria.
@item Also match reversed colors
@itemx Also match left-right flipped position
@cindex Match reversed colors, Menu Item
@cindex Match left-right flipped position, Menu Item
When looking for matching positions rather than by material,
these settings determine whether mirror images 
(in case of a vertical flip in combination with color reversal)
will be also considered a match.
The left-right flipping is only useful after all castling rights
have expired (or in Xiangqi).
@end table

@section Save Game Options
@cindex Save Game Options, Menu Item
Summons a dialog where you can specify whether XBoard should
automatically save files of games when they finish,
and where and how to do that.
@table @asis
@item Auto-Save Games
@cindex Auto-Save Games, Menu Item
When set XBoard will automatically save games on a file as they finish.
(Not when you abort them by pressing @samp{New Game}, though!)
It will either prompt you for a filename,
or use the file specified  by the @code{saveGameFile} option.
@item Own Games Only
@cindex Own Games Only, Menu Item
Setting this option will exclude games by others observed on an
Internet Chess Server from automatic saving.
@item Save Games on File
@cindex Save Games on File, Menu Item
Name of the file on which games should be saved automatically.
Games are always appended to the file,
and will never overwrite anything.
@item Save Final Position on File
@cindex Save Final Position on File, Menu Item
When a name is defined, the final position of each game
is appended to the mentioned file.
@item PGN Event Header
@cindex PGN Event Header, Menu Item
Specifies the name of the event used in the PGN event tag
of new games that you create.
@item Old Save Style
@cindex Old Save Style, Menu Item
Saves games in an obsolete and now long forgotten format,
rather than as PGN. Never use this for orthodox Chess!
@item Include Number Tag in tourney PGN
@cindex Include Number Tag in tourney PGN, Menu Item
When on this option will cause the non-standard 'Number' tag
to be written in any game saved in PGN format.
It will contain the unique number of the game in the tourney.
(As opposed to the 'Round' tag, which can be shared by many games.)
@item Save Score/Depth Info in PGN
@cindex Save Score/Depth in PGN, Menu Item
When on this option will cause the score and depth at which it was
calculated by an engine, and (when available) thinking time
to be saved with the move as a comment to the move,
in the format @{score/depth time@}.
Here 'score'is in pawn units from the point of view of the player
that made the move, with two digits behind the decimal Pawn.
'Time' is in seconds, or min:sec.
@item Save Out-of-Book Info in PGN
@cindex Save Out-of-Book Info in PGN, Menu Item
When on this option causes the score of the first move
the engine made after coming out of book in an 'Annotator' PGN tag.
@end table

@section Game List
@cindex Game List Tags, Menu Item
Pops up a dialog where you can select the PGN tags that should appear
on the lines in the @samp{Game List}, and their order.

@section Sound Options
@cindex Sound Options, Menu Item
Summons a dialog where you can specify the sounds that should accompany
various events that can occur in XBoard.
Most events are only relevant to ICS play, 
but the move sound is an important exception.
For each event listed in the dialog, 
you can select a standard sound from a menu.
@table @asis
@item Sound Program
@cindex Sound Program, Menu Item
Specifies the command XBoard should invoke to play sounds.
The specified text will be suffixed by the name of the sound file,
and then run as a command.
@item Sounds Directory
@cindex Sounds Directory, Menu Item
Specifies the directory where XBoard will look for files with
the names of the standard sounds.
@item User WAV File
@cindex User WAV File, Menu Item
When we type a filename here, it can be assigned to the events
by selecting @samp{Above WAV File} from the drop downs.
@item Try-Out Sound
@itemx Play
@cindex Try-Out Sound, Menu Item
The 'event' triggering the Try-Out sound is pressing
of the @samp{Play} button behind it.
This allows you to judge the sounds.
@end table

@section Save Settings Now
@cindex Save Settings Now, Menu Item
Selecting this menu item causes the current XBoard settings to be
written to the settings file, (.xboardrc in your home directory),
so they will also apply in future sessions.
Note that some settings are 'volatile', and are not saved,
because XBoard considers it too unlikely that you want those to apply
next time.
In particular this applies to the Chess program, and all options
giving information on those Chess programs (such as their directory,
if they have their own opening book, if they are UCI or native XBoard),
or the variant you are playing.
Such options would still be understood when they appear in the settings
file in case they were put there with the aid of a text editor, but they
would disappear from the file as soon as you save the settings.

Note that XBoard no longer pays attention to options values specified
in the .Xresources file.
(Specifying key bindings there will still work, though.)
To alter the default of volatile options, you can use the following method:
Rename your ~/.xboardrc settings file (to ~/.yboardrc, say), and create
a new file ~/.xboardrc, which only contains the options

@example
-settingsFile  ~/.yboardrc
-saveSettingsFile  ~/.yboardrc
@end example

@noindent
This will cause your settings to be saved on ~/.yboardrc in the future,
so that ~/.xboardrc is no longer overwritten.
You can then safely specify volatile options in ~/.xboardrc, either
before or after the settingsFile options.
Note that when you specify persistent options after the settingsFile options
in this ~/.xboardrc, you will essentially turn them into volatile options
with the specified value as default, because that value will overrule
the value loaded from the settings file (being read later).

@section Save Settings on Exit
@cindex Save Settings on Exit, Menu Item
Setting this option has no immediate effect, but causes the settings
to be saved when you quit XBoard. What happens then is otherwise 
identical to what happens when you use select "Save Settings Now",
see there.

@node Help Menu
@section Help Menu
@cindex Menu, Help
@cindex Help Menu
@table @asis
@item Info XBoard
@cindex Info XBoard, Menu Item
Displays the XBoard documentation in info format.  For this feature to
work, you must have the GNU info program installed on your system, and
the file @file{xboard.info} must either be present in the current
working directory, or have been installed by the @samp{make install}
command when you built XBoard.
@item Man XBoard
@cindex Man XBoard, Menu Item
Displays the XBoard documentation in man page format.
The @kbd{F1} key is a keyboard equivalent.  For this
feature to work, the file @file{xboard.6} must have been installed by
the @samp{make install} command when you built XBoard, and the
directory it was placed in must be on the search path for your
system's @samp{man} command.
@item About XBoard
@cindex About XBoard, Menu Item
Shows the current XBoard version number.
@end table

@node Keys
@section Other Shortcut Keys
@cindex Keys
@cindex Shortcut keys
@table @asis
@item Show Last Move
@cindex Show Last Move, Shortcut Key
By hitting @kbd{Enter} the last move will be re-animated.
@item Load Next Game
@cindex Load Next Game, Menu Item
Loads the next game from the last game record file you loaded.
The @kbd{Alt+PgDn} key triggers this action.
@item Load Previous Game
@cindex Load Previous Game, Menu Item
Loads the previous game from the last game record file you
loaded.  The @kbd{Alt+PgUp} key triggers this action.
Not available if the last game was loaded from a pipe.
@item Reload Same Game
@cindex Reload Same Game, Menu Item
Reloads the last game you loaded.
Not available if the last game was loaded from a pipe.
Currently no keystroke is assigned to this ReloadGameProc.
@item Reload Same Position
@cindex Reload Same Position, Menu Item
Reloads the last position you loaded.
Not available if the last position was loaded from a pipe.
Currently no keystroke is assigned to this ReloadPositionProc.
@end table

In the Xaw build of XBoard you can add or remove shortcut keys
using the X resources @code{paneA.translations}.
Here is an example of what could go into your
@file{.Xdefaults} file:

@example
XBoard*paneA.translations: \
  Shift<Key>?: MenuItem(Help.About) \n\
  Ctrl<Key>y: MenuItem(Action.Accept) \n\
  Ctrl<Key>n: MenuItem(Action.Decline) \n\
  Ctrl<Key>i: MenuItem(Nothing)
@end example
@noindent
So the key should always be bound to the action 'MenuItem',
with the (hierarchical) name of the menu item as argument.
There are a few actions available for which no menu item exists:
Binding a key to @code{Nothing} makes it do nothing, thus removing
it as a shortcut key. Other such functions that can be bound to keys
are:

@example
AboutGame, DebugProc (switches the -debug option on or off),
LoadNextGame, LoadPrevGame, ReloadGame, ReloadPosition.
@end example

@node Options
@chapter Options
@cindex Options
@cindex Options

This section documents the command-line options to XBoard.  You can
set these options in two ways: by typing them on the shell command
line you use to start XBoard, or by editing the settings file
(usually ~/.xboardrc) to alter the value of the setting that was
saved there.  Some of the options
cannot be changed while XBoard is running; others set the initial
state of items that can be changed with the @ref{Options} menu.

Most of the options have both a long name and a short name. To turn a
boolean option on or off from the command line, either give its long
name followed by the value true or false
(@samp{-longOptionName true}), or give just the short name to turn the
option on (@samp{-opt}), or the short name preceded by @samp{x} to
turn the option off (@samp{-xopt}). For options that take strings or
numbers as values, you can use the long or short option names
interchangeably.

@menu
* Chess engine options::        Controlling the chess engine.
* UCI + WB Engine Settings::    Setting some very common engine parameters
* Tournament options::          Running tournaments and matches between engines.
* ICS options::                 Connecting to and using ICS.
* Load and Save options::       Input/output options.
* User interface options::      Look and feel options.
* Adjudication Options::        Control adjudication of engine-engine games.
* Install options::             Maintaining and extending the XBoard install.
* Other options::               Miscellaneous.
@end menu

@node Chess engine options
@section Chess Engine Options
@cindex options, Chess engine
@cindex Chess engine options
@table @asis
@item -tc or -timeControl minutes[:seconds]
@cindex tc, option
@cindex timeControl, option
Each player begins with his clock set to the @code{timeControl} period.
Default: 5 minutes.
The additional options @code{movesPerSession} and @code{timeIncrement}
are mutually exclusive.  
@item -mps or -movesPerSession moves
@cindex mps, option
@cindex movesPerSession, option
When both players have made @code{movesPerSession} moves, a
new @code{timeControl} period is added to both clocks.  Default: 40 moves.
@item -inc or -timeIncrement seconds
@cindex inc, option
@cindex timeIncrement, option
If this option is specified, @code{movesPerSession} is ignored.
Instead, after each player's move, @code{timeIncrement} seconds are
added to his clock.  
Use @samp{-inc 0} if you want to require the entire
game to be played in one @code{timeControl} period, with no increment.
Default: -1, which specifies @code{movesPerSession} mode.
@item -clock/-xclock or -clockMode true/false
@cindex clock, option
@cindex clockMode, option
Determines whether or not to display the chess clocks. If clockMode is
false, the clocks are not shown, but the side that is to play next
is still highlighted. Also, unless @code{searchTime}
is set, the chess engine still keeps track of the clock time and uses it to
determine how fast to make its moves.
@item -st or -searchTime minutes[:seconds]
@cindex st, option
@cindex searchTime, option
Tells the chess engine to spend at most the given amount of time
searching for each of its moves. Without this option, the chess engine
chooses its search time based on the number of moves and amount
of time remaining until the next time control.
Setting this option also sets clockMode to false.
@item -depth or -searchDepth number
@cindex sd, option
@cindex searchDepth, option
Tells the chess engine to look ahead at most the given number of moves
when searching for a move to make. Without this option, the chess
engine chooses its search depth based on the number of moves and
amount of time remaining until the next time control.  With the option,
the engine will cut off its search early if it reaches the specified depth.
@item -firstNPS number
@itemx -secondNPS number
@cindex firstNPS, option
@cindex secondNPS, option
Tells the chess engine to use an internal time standard based on its node count, 
rather then wall-clock time, to make its timing decisions. 
The time in virtual seconds should be obtained by dividing the node count 
through the given number, like the number was a rate in nodes per second. 
Xboard will manage the clocks in accordance with this, relying on the number 
of nodes reported by the engine in its thinking output. If the given number equals zero, 
it can obviously not be used to convert nodes to seconds, and the time reported 
by the engine is used to decrement the XBoard clock in stead. The engine is supposed to 
report in CPU time it uses, rather than wall-clock time, in this mode. This option 
can provide fairer conditions for engine-engine matches on heavily loaded machines, 
or with very fast games (where the wall clock is too inaccurate). 
@code{showThinking} must be on for this option to work. Default: -1 (off).
Not many engines might support this yet!
@item -firstTimeOdds factor
@itemx -secondTimeOdds factor
@cindex firstTimeOdds, option
@cindex secondTimeOdds, option
Reduces the time given to the mentioned engine by the given factor. 
If pondering is off, the effect is indistinguishable from what would happen 
if the engine was running on an n-times slower machine. Default: 1.
@item -timeOddsMode mode
@cindex timeOddsMode, option
This option determines how the case is handled where both engines have a time-odds handicap. 
If mode=1, the engine that gets the most time will always get the nominal time, 
as specified by the time-control options, and its opponent's time is renormalized accordingly. 
If mode=0, both play with reduced time. Default: 0.
@item -hideThinkingFromHuman true/false
Controls the Hide Thinking option. @xref{Options Menu}. Default: true.
(Replaces the Show-Thinking option of older xboard versions.)
@item -thinking/-xthinking or -showThinking true/false
@cindex thinking, option
@cindex showThinking, option
Forces the engine to send thinking output to xboard. 
Used to be the only way to control if thinking output was displayed 
in older xboard versions,
but as the thinking output in xboard 4.3 is also used for several other
purposes (adjudication, storing in PGN file) the display of it is now controlled
by the new option Hide Thinking. @xref{Options Menu}. Default: false.
(But if xboard needs the thinking output for some purpose,
it makes the engine send it despite the setting of this option.)
@item -ponder/-xponder or -ponderNextMove true/false
@cindex ponder, option
@cindex ponderNextMove, option
Sets the Ponder Next Move menu option. @xref{Options Menu}. Default: true.
@item -smpCores number
Specifies the maximum number of CPUs an SMP engine is allowed to use.
Only works for engines that support the XBoard/WinBoard-protocol cores feature.
@item -mg or -matchGames n
@cindex mg, option
@cindex matchGames, option
Automatically runs an n-game match between two chess engines,
with alternating colors.
If the @code{loadGameFile} or @code{loadPositionFile} option is set,
XBoard
starts each game with the given opening moves or the given position;
otherwise, the games start with the standard initial chess position.
If the @code{saveGameFile} option is set, a move record for the
match is appended to the specified file. If the @code{savePositionFile}
option is set, the final position reached in each game of the match is appended
to the specified file. When the match is over, XBoard
displays the match score and exits. Default: 0 (do not run a match).
@item -mm/-xmm or -matchMode true/false
@cindex mm, option
@cindex matchMode, option
Setting @code{matchMode} to true is equivalent to setting
@code{matchGames} to 1.
@item -sameColorGames n
@cindex sameColorGames, option
Automatically runs an n-game match between two chess engines,
without alternating colors.
Otherwise the same applies as for the @samp{-matchGames} option,
over which it takes precedence if both are specified. (See there.)
Default: 0 (do not run a match).
@item -epd
@cindex epd, option
This option puts XBoard in a special mode for solving EPD test-suites,
for the entire duration of the session.
In this mode games are aborted after a single move,
and that move will be compared with the best-move or avoid-move
from the EPD position description from which the 'game' was started.
Playing a best move counts as a win, playing an avoid move as a loss,
and playing any other move counts as a draw.
This option should be used in combination with match mode,
and an EPD file of starting positions with an auto-incrementing index.
Color assignment will be such that the first engine plays all moves,
and the second engine will be never involved.
The results for individual positions,
as well as the time used for solving them,
will be reported in the lower pane of the Engine Output window.
@item -fcp or -firstChessProgram program
@itemx -scp or -secondChessProgram program
@cindex fcp, option
@cindex firstChessProgram, option
@cindex scp, option
@cindex secondChessProgram, option
Name of first and second chess engine, respectively.
A second chess engine is started only in Two Machines (match) mode,
or in Analyze mode with two engines.
The second engine is by default the same as the first.
Default for the first engine: @file{fairymax}.
@item -fe or -firstEngine nickname
@itemx -se or -secondEngine nickname
@cindex se, option
@cindex secondEngine, option
@cindex fe, option
@cindex firstEngine, option
This is an alternative to the @code{fcp} and @code{scp} options
for specifying the first and second engine,
for engines that were already registered (using the @samp{Load Engine} dialog)
in XBoard's settings file.
It will not only retrieve the real name of the engine,
but also all options configured with it.
(E.g. if it is UCI, whether it should use book.)
@item -fb/-xfb or -firstPlaysBlack true/false
@cindex fb, option
@cindex firstPlaysBlack, option
In games between two chess engines, firstChessProgram normally plays
white.  If this option is true, firstChessProgram plays black.  In a
multi-game match, this option affects the colors only for the first
game; they still alternate in subsequent games.
@item -fh or -firstHost host
@itemx -sh or -secondHost host
@cindex fh, option
@cindex firstHost, option
@cindex sh, option
@cindex secondHost, option
Hosts on which the chess engines are to run. The default for
each is @file{localhost}. If you specify another host, XBoard
uses @file{rsh} to run the chess engine there. (You can substitute a
different remote shell program for rsh using the @code{remoteShell}
option described below.)
@item -fd or -firstDirectory dir
@itemx -sd or -secondDirectory dir
@cindex fd, option
@cindex firstDirectory, option
@cindex sd, option
@cindex secondDirectory, option
Working directories in which the chess engines are to be run.
The default is "", which means to run the chess engine
in the same working directory as XBoard
itself.  (See the CHESSDIR environment variable.)
This option is effective only when the chess engine is being run
on the local host; it does not work if the engine is run remotely
using the -fh or -sh option.
@item -initString string or -firstInitString
@itemx -secondInitString string
@cindex initString, option
@cindex firstInitString, option
@cindex secondInitString, option
The string that is sent to initialize each chess engine for a new game.
Default:

@example
new
random
@end example
@noindent
Setting this option from the command line is tricky, because you must
type in real newline characters, including one at the very end.
In most shells you can do this by
entering a @samp{\} character followed by a newline. 
Using the character sequence @samp{\n} in the string should work too, though.

If you change this option, don't remove the @samp{new} 
command; it is required by all chess engines to
start a new game.

You can remove the @samp{random} command if you like; including it
causes GNU Chess 4 to randomize its move selection slightly so that it
doesn't play the same moves in every game.  Even without
@samp{random}, GNU Chess 4 randomizes its choice of moves from its
opening book.  Many other chess engines ignore this command entirely
and always (or never) randomize.

You can also try adding other commands to the initString; see the
documentation of the chess engine you are using for details.
@item -firstComputerString string
@itemx -secondComputerString string
@cindex firstComputerString, option
@cindex secondComputerString, option
The string that is sent to the chess engine if its opponent is another
computer chess engine.  The default is @samp{computer\n}.  Probably the
only useful alternative is the empty string (@samp{}), which keeps the
engine from knowing that it is playing another computer.
@item -reuse/-xreuse or -reuseFirst true/false
@itemx -reuse2/-xreuse2 or -reuseSecond true/false
@cindex reuse, option
@cindex reuseFirst, option
@cindex reuse2, option
@cindex reuseSecond, option
If the option is false,
XBoard kills off the chess engine after every game and starts
it again for the next game.  
If the option is true (the default), 
XBoard starts the chess engine only once
and uses it repeatedly to play multiple games.
Some old chess engines may not work properly when
reuse is turned on, but otherwise games will start faster if it is left on.
@item -firstProtocolVersion version-number
@itemx -secondProtocolVersion version-number
@cindex firstProtocolVersion, option
@cindex secondProtocolVersion, option
This option specifies which version of the chess engine communication
protocol to use.  By default, version-number is 2.  In version 1, the
"protover" command is not sent to the engine; since version 1 is a
subset of version 2, nothing else changes.  Other values for
version-number are not supported.
@item -firstScoreAbs true/false
@itemx -secondScoreAbs true/false
@cindex firstScoreAbs, option
@cindex secondScoreAbs, option
If this option is set, the score reported by the engine is taken to be 
that in favor of white, even when the engine plays black. 
Important when XBoard uses the score for adjudications, or in PGN reporting. 
@item -niceEngines priority
@cindex niceEngines, option
This option allows you to lower the priority of the engine processes, 
so that the generally insatiable hunger for CPU time of chess engines does not interfere so much 
with smooth operation of XBoard (or the rest of your system). 
Negative values could increase the engine priority, which is not recommended.
@item -firstOptions string
@itemx -secondOptions string
@cindex firstOptions, option
@cindex secondOptions, option
The given string is a comma-separated list of (option name=option value) pairs, 
like the following example: "style=Karpov,blunder rate=0". 
If an option announced by the engine at startup through the feature commands of the XBoard/WinBoard protocol 
matches one of the option names (i.e. "style" or "blunder rate"), 
it would be set to the given value (i.e. "Karpov" or 0) 
through a corresponding option command to the engine. 
This provided that the type of the value (text or numeric) matches as well.
@item -firstNeedsNoncompliantFEN string
@itemx -secondNeedsNoncompliantFEN string
@cindex firstNeedsNoncompliantFEN, option
@cindex secondNeedsNoncompliantFEN, option
The castling rights and e.p. fields of the FEN sent to the mentioned engine 
with the setboard command will be replaced by the given string. This can for 
instance be used to run engines that do not understand Chess960 FENs in 
variant fischerandom, to make them at least understand the opening position, 
through setting the string to "KQkq -". (Note you also have to give the e.p. field!) 
Other possible applications are to provide work-arounds for engines that want to see 
castling and e.p. fields in variants that do not have castling or e.p. 
(shatranj, courier, xiangqi, shogi) so that XBoard would normally omit them 
(string = "- -"), or to add variant-specific fields that are not yet supported by XBoard 
(e.g. to indicate the number of checks in 3check).
@item -shuffleOpenings
@cindex shuffleOpenings, option
Forces shuffling of the opening setup in variants that normally have a fixed initial position.
Shufflings are symmetric for black and white, and exempt King and Rooks in variants
with normal castling.
Remains in force until a new variant is selected.
@item -fischerCastling
@cindex fischerCastling, option
Specifies Fischer castling (as in Chess960) should be enabled in variants
that normally would not have it.
Remains in force until a new variant is selected.
@end table

@node UCI + WB Engine Settings
@section UCI + WB Engine Settings
@cindex Engine Settings
@cindex Settings, Engine
@table @asis
@item -fUCI or -firstIsUCI true/false
@itemx -sUCI or -secondIsUCI true/false
@cindex fUCI, option
@cindex sUCI, option
@cindex firstIsUCI, option
@cindex secondIsUCI, option
Indicates if the mentioned engine executable file is a UCI engine, 
and should be run with the aid of the Polyglot adapter rather than directly. 
Xboard will then pass the other UCI options and engine name to Polyglot 
on its command line, according to the option @code{adapterCommand}.
@item -fUCCI
@itemx -sUCCI
@itemx -fUSI
@itemx -sUSI
@cindex fUCCI, option
@cindex sUCCI, option
@cindex fUSI, option
@cindex sUSI, option
Options similar to @code{fUCI} and @code{sUCI}, except that they
use the indicated engine with the protocol adapter specified in
the @samp{uxiAdapter} option.
This can then be configured for running a UCCI or USI adapter,
as the need arises.
@item -adapterCommand string
@cindex adapterCommand, option
The string contains the command that should be issued by XBoard
to start an engine that is accompanied by the @code{fUCI} option.
Any identifier following a percent sign in the command (e.g. %fcp)
will be considered the name of an XBoard option, and be replaced
by the value of that option at the time the engine is started.
For starting the second engine, any leading "f" or "first" in
the option name will first be replaced by "s" or "second",
before finding its value.
Default: 'polyglot -noini -ec "%fcp" -ed "%fd"'
@item -uxiAdapter string
@cindex uxiAdapter, option
Similar to @code{adapterCommand}, but used for engines accompanied
by the @code{fUCCI} or @code{fUSI} option, so you can configure
XBoard to be ready to handle more than one flavor of non-native protocols.
Default: ""
@item -polyglotDir filename
@cindex polyglotDir, option
Gives the name of the directory in which the Polyglot adapter for UCI engines resides.
Default: "".
@item -usePolyglotBook true/false
@cindex usePolyglotBook, option
Specifies if the Polyglot book should be used as GUI book.
@item -polyglotBook filename
@cindex polyglotBook, option
Gives the filename of the opening book.
The book is only used when the @code{usePolyglotBook} option is set to true,
and the option @code{firstHasOwnBookUCI} or @code{secondHasOwnBookUCI} 
applying to the engine is set to false.
The engine will be kept in force mode as long as the current position is in book, 
and XBoard will select the book moves for it. Default: "".
@item -fNoOwnBookUCI or -firstXBook or -firstHasOwnBookUCI true/false
@itemx -sNoOwnBookUCI or -secondXBook or -secondHasOwnBookUCI true/false
@cindex fNoOwnBookUCI, option
@cindex sNoOwnBookUCI, option
@cindex firstHasOwnBookUCI, option
@cindex secondHasOwnBookUCI, option
@cindex firstXBook, option
@cindex secondXBook, option
Indicates if the mentioned engine has its own opening book it should play from,
rather than using the external book through XBoard. 
Default: depends on setting of the option @code{discourageOwnBooks}.
@item -discourageOwnBooks true/false
@cindex discourageOwnBooks, option
When set, newly loaded engines will be assumed to use the GUI book, 
unless they explicitly specify differently.
Otherwise they will be assumed to not use the GUI book,
unless the specify differently (e.g. with @code{firstXBook}).
Default: false.
@item -bookDepth n
@cindex bookDepth, option
Limits the use of the GUI book to the first n moves of each side.
Default: 12.
@item -bookVariation n
@cindex bookVariation, option
A value n from 0 to 100 tunes the choice of moves from the GUI books
from totally random to best-only. Default: 50
@item -mcBookMode
@cindex mcBookMode, option
When this volatile option is specified, the probing algorithm of the
GUI book is altered to always select the move that is most under-represented
based on its performance.
When all moves are played in approximately the right proportion,
a book miss will be reported, to give the engine opportunity to
explore a new move.
In addition score of the moves will be kept track of during the session
in a book buffer.
By playing an match in this mode, a book will be built from scratch.
The only output are the saved games, which can be converted to an
actual book later, with the @samp{Save Games as Book} command.
The latter command can also be used to pre-fill the book buffer
before adding new games based on the probing algorithm.
@item -fn string or -firstPgnName string
@itemx -sn string or -secondPgnName string
@cindex firstPgnName, option
@cindex secondPgnName, option
@cindex fn, option
@cindex sn, option
Indicates the name that should be used for the engine in PGN tags of
engine-engine games.
Intended to allow you to install versions of the same engine with different settings, 
and still distinguish them.
Default: "". 
@item -defaultHashSize n
@cindex defaultHashSize, option
Sets the size of the hash table to n MegaBytes. Together with the EGTB cache size 
this number is also used to calculate the memory setting of XBoard/WinBoard engines, 
for those that support the memory feature of the XBoard/WinBoard protocol. Default: 64.
@item -defaultCacheSizeEGTB n
@cindex defaultCacheSizeEGTB, option
Sets the size of the EGTB cache to n MegaBytes. Together with the hash-table size 
this number is also used to calculate the memory setting of XBoard/WinBoard engines, 
for those that support the memory feature of the XBoard/WinBoard protocol. Default: 4.
@item -defaultPathEGTB filename
@cindex defaultPathEGTB, option
Gives the name of the directory where the end-game tablebases are installed, for UCI engines.
Default: "/usr/local/share/egtb".
@item -egtFormats string
@cindex egtFormats, option
Specifies which end-game tables are installed on the computer, and where. 
The argument is a comma-separated list of format specifications, 
each specification consisting of a format name, a colon, and a directory path name, 
e.g. "nalimov:/usr/local/share/egtb". 
If the name part matches that of a format that the engine requests through a feature command, 
xboard will relay the path name for this format to the engine through an egtpath command. 
One egtpath command for each matching format will be sent. 
Popular formats are "nalimov" and "gaviota" DTM tablebases,
syzygy DTZ tablebases and "scorpio" bitbases.
Default: "".
@item -firstChessProgramNames=@{names@}
@cindex firstChessProgramNames, option
This option lets you customize the listbox with chess-engine names 
that appears in the @samp{Load Engine} and @samp{Tournament Options} dialog. 
It consists of a list of strings, one per line. 
When an engine is loaded, the corresponding line is prefixed with "-fcp ",
and processed like it appeared on the command line.
That means that apart from the engine command,
it can contain any number of XBoard options you want to use with this engine.
(Commonly used options here are -fd, -firstXBook, -fUCI, -variant.)

The value of this option is gradually built as you load new engines
through the @samp{Load Engine} menu dialog, with @samp{Add to list} ticked. 
To change it in other ways, (e.g. deleting engines),
use the menu item @samp{Edit Engine List} in the @samp{Engine} menu.
@end table

@node Tournament options
@section Tournament options
@cindex Tournament Options
@cindex Options, Tournament
@table @asis
@item -defaultMatchGames n
@cindex defaultMatchGames, option
Sets the number of games that will be used for a match between two engines
started from the menu to n. Also used as games per pairing in other tournament
formats.  Default: 10.
@item -matchPause n
@cindex matchPause, option
Specifies the duration of the pause between two games of a match or tournament
between engines as n milliseconds.
Especially engines that do not support ping need this option, 
to prevent that the move they are thinking on when an opponent unexpectedly
resigns will be counted for the next game, (leading to illegal moves there).
Default: 10000.
@item -tf filename or -tourneyFile filename
@cindex tf, option
@cindex tourneyFile, option
Specifies the name of the tournament file used in match mode 
to conduct a multi-player tournament. 
This file is a special settings file, 
which stores the description of the tournament (including progress info), 
through normal options (e.g. for time control, load and save files), 
and through some special-purpose options listed below.
@item -tt number or -tourneyType number
@cindex tt, option
@cindex tourneyType, option
Specifies the type of tourney: 0 = round-robin, 
N>0 = (multi-)gauntlet with N gauntlet engines, 
-1 = Swiss through external pairing engine. 
Volatile option, but stored in tourney file.
@item -cy number or -tourneyCycles number
@cindex cy, option
@cindex tourneyCycles, option
Specifies the number of cycles in a tourney. 
Volatile option, but stored in tourney file.
@item -participants list
@cindex participants, option
The list is a multi-line text string that specifies engines 
occurring in the @code{firstChesProgramNames} list 
in the settings file by their (implied or explicitly given) nicknames, 
one engine per line. 
The mentioned engines will play in the tourney. 
Volatile option, but stored in tourney file.
@item -results string
@cindex results, option
The string of +=- characters lists the result of all played games in a tourney. 
Games currently playing are listed as *, 
while a space indicates a game that is not yet played. 
Volatile option, but stored in tourney file.
@item -defaultTourneyName string
@cindex defaultTourneyName, option
Specifies the name of the tournament file XBoard should propose 
when the @samp{Match Options} dialog is opened. 
Any %y, %M, %d, %h, %m, %s in the string are replaced by the current 
year, month, day of the month, hours, minutes, seconds of the current time, 
respectively, as two-digit number. 
A %Y would be replaced by the year as 4-digit number. Default: empty string.
@item -pairingEngine filename
@cindex pairingEngine, option
Specifies the external program to be used to pair the participants in Swiss tourneys. 
XBoard communicates with this engine in the same way as it communicates with Chess engines. 
The only commands sent to the pairing engine are “results N string”, 
(where N is the number of participants, 
and string the results so far in the format of the results option), 
and “pairing N”, (where N is the number of the tourney game). 
To the latter the pairing engine should answer with “A-B”, 
where A and B are participant numbers (in the range 1-N). 
(There should be no reply to the results command.) Default: empty string.
@item -afterGame string
@itemx -afterTourney string
@cindex afterGame, option
@cindex afterTourney, option
When non-empty, the given string will be executed as a system command 
after each tournament game, or after the tourney completes, respectively.
This can be used, for example, to autmatically run a cross-table generator
on the PGN file where games are saved, to update the tourney standings.
Default: ""
@item -syncAfterRound true/false
@itemx -syncAfterCycle true/false
@cindex syncAfterRound, option
@cindex syncAfterCycle, option
Controls whether different instances of XBoard concurrently running the 
same tournament will wait for each other.
Defaults: sync after cycle, but not after round.
@item -seedBase number
@cindex seedBase, option
Used to store the seed of the pseudo-random-number generator in the
tourneyFile, so that separate instances of XBoard working on the same
tourney can take coherent 'random' decisions, such as picking an
opening for a given game number.
@end table

@node ICS options
@section ICS options
@cindex ICS options
@cindex Options, ICS
@table @asis
@item -ics/-xics or -internetChessServerMode true/false
@cindex ics, option
@cindex internetChessServerMode, option
Connect with an Internet Chess Server to play chess against its
other users, observe games they are playing, or review games
that have recently finished. Default: false.
@item -icshost or -internetChessServerHost host
@cindex icshost, option
@cindex internetChessServerHost, option
The Internet host name or address of the chess server to connect
to when in ICS mode. Default: @code{chessclub.com}.
Another popular chess server to try is @code{freechess.org}.
If your site doesn't have a working Internet name server, try
specifying the host address in numeric form. 
You may also need
to specify the numeric address when using the icshelper option
with timestamp or timeseal (see below).
@item -icsport or -internetChessServerPort port-number
@cindex icsport, option
@cindex internetChessServerPort, option
The port number to use when connecting to a chess server in ICS
mode. Default: 5000.
@item -icshelper or -internetChessServerHelper prog-name
@cindex icshelper, option
@cindex internetChessServerHelper, option
An external helper program used to communicate with the chess server.
You would set it to "timestamp" for ICC (chessclub.com) or
"timeseal" for FICS (freechess.org), after
obtaining the correct version of timestamp or timeseal for your
computer.  See "help timestamp" on ICC and "help timeseal" on FICS.
This option is shorthand for @code{-useTelnet -telnetProgram program}.
@item -telnet/-xtelnet or -useTelnet true/false
@cindex telnet, option
@cindex useTelnet, option
This option is poorly named; it should be called useHelper.
If set to true, it instructs XBoard to run an external
program to communicate with the Internet Chess Server. 
The program to use is given by the telnetProgram option.
If the option is
false (the default), XBoard opens a TCP socket and uses its own
internal implementation of the telnet protocol to communicate with the
ICS. @xref{Firewalls}.
@item -telnetProgram prog-name
@cindex telnetProgram, option
This option is poorly named; it should be called helperProgram.
It gives the name of the telnet program to be used with
the @code{gateway} and @code{useTelnet} options.  The default is
@file{telnet}. The telnet program is invoked with the value of
@code{internetChessServerHost} as its first argument and the value
of @code{internetChessServerPort} as its second argument.
@xref{Firewalls}.
@item -gateway host-name
@cindex gateway, option
If this option is set to a host name, XBoard communicates with the
Internet Chess Server by using @file{rsh} to run
the @code{telnetProgram} on the given host,
instead of using its own internal implementation
of the telnet protocol. You can substitute a different remote shell
program for @file{rsh} using the @code{remoteShell} option described below.
@xref{Firewalls}.
@item -internetChessServerCommPort or -icscomm dev-name
@cindex internetChessServerCommPort, option
@cindex icscomm, option
If this option is set, XBoard communicates with the ICS through
the given character I/O device instead of opening a TCP connection.
Use this option if your system does not have any kind of
Internet connection itself (not even a SLIP or PPP connection),
but you do have dial-up access (or a hardwired terminal line) to
an Internet service provider from which you can telnet to the ICS.

The support for this option in XBoard is minimal. You need to
set all communication parameters and tty modes before you enter
XBoard.

Use a script something like this:

@example
stty raw -echo 9600 > /dev/tty00
xboard -ics -icscomm /dev/tty00
@end example

Here replace @samp{/dev/tty00} with the name of the device that your
modem is connected to. You might have to add several more
options to these stty commands. See the man pages for @file{stty}
and @code{tty} if you run into problems. Also, on many systems stty
works on its standard input instead of standard output, so you
have to use @samp{<} instead of @samp{>}.

If you are using linux, try starting with the script below.
Change it as necessary for your installation.

@example
#!/bin/sh -f
# configure modem and fire up XBoard

# configure modem
(
  stty 2400 ; stty raw ; stty hupcl ; stty -clocal
  stty ignbrk ; stty ignpar ; stty ixon ; stty ixoff
  stty -iexten ; stty -echo
) < /dev/modem
xboard -ics -icscomm /dev/modem
@end example
@noindent
After you start XBoard in this way, type whatever commands are
necessary to dial out to your Internet provider and log in.
Then telnet to ICS, using a command like
@kbd{telnet chessclub.com 5000}.
Important: See the paragraph below about extra echoes, 
in @ref{Limitations}.
@item -icslogon or -internetChessServerLogonScript file-name
@cindex icslogon, option
@cindex internetChessServerLogonScript, option
@cindex .icsrc
Whenever XBoard connects to the Internet Chess Server,
if it finds a file with the name given in this option, it feeds the
file's contents to the ICS as commands. The default file name
is @file{.icsrc}.
Usually the first two lines of the file should be
your ICS user name and password.
The file can be either in $CHESSDIR, in XBoard's working
directory if CHESSDIR is not set, or in your home directory.
@item -msLoginDelay delay
@cindex msLoginDelay, option
If you experience trouble logging on to an ICS when using the
@code{-icslogon} option, inserting some delay between characters
of the logon script may help. This option adds @code{delay}
milliseconds of delay between characters. Good values to try
are 100 and 250.
@item -icsinput/-xicsinput or -internetChessServerInputBox true/false
@cindex icsinput, option
@cindex internetChessServerInputBox, option
Sets the ICS Input Box menu option. @xref{Mode Menu}. Default: false.
@item -autocomm/-xautocomm or -autoComment true/false
@cindex autocomm, option
@cindex autoComment, option
Sets the Auto Comment menu option. @xref{Options Menu}. Default: false.
@item -autoflag/-xautoflag or -autoCallFlag true/false
@cindex autoflag, option
@cindex autoCallFlag, option
Sets the Auto Flag menu option.  @xref{Options Menu}. Default: false.
@item -autobs/-xautobs or -autoObserve true/false
@cindex autobs, option
@cindex autoObserve, option
Sets the Auto Observe menu option.  @xref{Options Menu}. Default: false.
@item -autoKibitz
@cindex autoKibitz, option
Enables kibitzing of the engines last thinking output (depth, score, time, speed, PV) 
before it moved
to the ICS, in zippy mode. The option @code{showThinking} must be switched on for 
this option to work.
Also diverts similar kibitz information of an opponent engine that is playing you 
through the ICS to the engine-output window, as if the engine was playing locally.
@item -seekGraph true/false or -sg
@cindex seekGraph, option
@cindex sg, option
Enables displaying of the seek graph by left-clicking the board when
you are logged on to an ICS and currently idle.
The seek graph show all players currently seeking games on the ICS,
plotted according to their rating and the time control of the game they seek,
in three different colors (for rated, unrated and wild games).
Computer ads are displayed as squares, human ads are dots.
Default: false.
@item -autoRefresh true/false
@cindex autoRefresh, option
Enables automatic updating of the seek graph,
by having the ICS send a running update of all newly placed
and removed seek ads.
This consumes a substantial amount of communication bandwidth,
and is only supported for FICS and ICC.
Default: false.
@item -backgroundObserve true/false
@cindex backgroundObserve, option
When true, boards sent to you by the ICS from other games while you are playing
(e.g. because you are observing them)
will not be automatically displayed.
Only a summary of time left and material of both players will appear
in the message field above the board.
XBoard will remember the last board it has received this way,
and will display it instead of the position in your own game
when you press the right mouse button.
No other information is stored on such games observed in the background;
you cannot save such a game later, or step through its moves.
This feature is provided solely for the benefit of bughouse players,
to enable them to peek at their partner's game without the need
to logon twice.
Default: false.
@item -dualBoard true/false
@cindex dualBoard, option
In combination with -backgroundObserve true, this option will display
the board of the background game side by side with that of your own game,
so you can have it in view permanently.
Any board or holdings info coming in will be displayed on the secondary
board immediately.
This feature is still experimental and largely unfinished.
There is no animation or highlighting of moves on the secondary board.
Default: false.
@item -disguisePromotedPieces true/false
@cindex disguisePromotedPieces, option
When set promoted Pawns in crazyhouse/bughouse are displayed identical
to primordial pieces of the same type, rather than distinguishable.
Default: true.
@item -moves/-xmoves or -getMoveList true/false
@cindex moves, option
@cindex getMoveList, option
Sets the Get Move List menu option.  @xref{Options Menu}.  Default: true.
@item -alarm/-xalarm or -icsAlarm true/false
@cindex alarm, option
@cindex icsAlarm, option
Sets the ICS Alarm menu option.  @xref{Options Menu}. Default: true.
@item -icsAlarmTime ms
@cindex icsAlarmTime, option
Sets the time in milliseconds for the ICS Alarm menu option.
@xref{Options Menu}. Default: 5000.
@item lowTimeWarning true/false
@cindex lowTimeWarning, option
Controls a color change of the board as a warning your time is running out.
@xref{Options Menu}. Default: false.
@item -pre/-xpre \fRor\fB -premove true/false
@cindex pre, option
@cindex premove, option
Sets the Premove menu option. @xref{Options Menu}. Default: true.
@item -prewhite/-xprewhite or -premoveWhite
@itemx -preblack/-xpreblack or -premoveBlack
@itemx -premoveWhiteText string
@itemx -premoveBlackText string
@cindex prewhite, option
@cindex premoveWhite, option
@cindex preblack, option
@cindex premoveBlack, option
@cindex premoveWhiteText, option
@cindex premoveBlackText, option
Set the menu options for specifying the first move for either color. 
@xref{Options Menu}. Defaults: false and empty strings, so no pre-moves.
@item -quiet/-xquiet or -quietPlay true/false
@cindex quiet, option
@cindex quietPlay, option
Sets the Quiet Play menu option.  @xref{Options Menu}.  Default: false.
@item -colorizeMessages or -colorize/-xcolorize
@cindex Colors
@cindex colorize, option
@cindex colorizeMessages, option
Setting colorizeMessages
to true tells XBoard to colorize the messages received from
the ICS.  Colorization works only if your xterm 
supports ISO 6429 escape sequences for changing text colors.
Default: true.
@item -colorShout foreground,background,bold
@itemx -colorSShout foreground,background,bold
@itemx -colorCShout foreground,background,bold
@itemx -colorChannel1 foreground,background,bold
@itemx -colorChannel foreground,background,bold
@itemx -colorKibitz foreground,background,bold
@itemx -colorTell foreground,background,bold
@itemx -colorChallege foreground,background,bold
@itemx -colorRequest foreground,background,bold
@itemx -colorSeek foreground,background,bold
@itemx -colorNormal foreground,background,bold
@cindex Colors
@cindex colorShout, option
@cindex colorSShout, option
@cindex colorCShout, option
@cindex colorChannel1, option
@cindex colorChannel, option
@cindex colorKibitz, option
@cindex colorTell, option
@cindex colorChallenge, option
@cindex colorRequest, option
@cindex colorSeek, option
@cindex colorNormal, option
These options set the colors used when colorizing ICS messages.
All ICS messages are grouped into one of these categories:
shout, sshout, channel 1, other channel, kibitz, tell, challenge, 
request (including abort, adjourn, draw, pause, and takeback), or
normal (all other messages).  

Each foreground or background argument can be one of the following:
black, red, green, yellow, blue, magenta, cyan, white, or default.
Here ``default'' means the default foreground or background color of
your xterm.  Bold can be 1 or 0.  If background is omitted, ``default''
is assumed; if bold is omitted, 0 is assumed.

@item -soundProgram progname
@cindex soundProgram, option
@cindex Sounds
If this option is set to a sound-playing program that is installed and
working on your system, XBoard can play sound files when certain
events occur, listed below.  The default program name is "play".  If
any of the sound options is set to "$", the event rings the terminal
bell by sending a ^G character to standard output, instead of playing
a sound file.  If an option is set to the empty string "", no sound is
played for that event.
@item -soundDirectory directoryname
@cindex soundDirectory, option
@cindex Sounds
This option specifies where XBoard will look for sound files,
when these are not given as an absolute path name.
@item -soundShout filename
@itemx -soundSShout filename
@itemx -soundCShout filename
@itemx -soundChannel filename
@itemx -soundChannel1 filename
@itemx -soundKibitz filename
@itemx -soundTell filename
@itemx -soundChallenge filename
@itemx -soundRequest filename
@itemx -soundSeek filename
@cindex soundShout, option
@cindex soundSShout, option
@cindex soundCShout, option
@cindex soundChannel, option
@cindex soundChannel1, option
@cindex soundKibitz, option
@cindex soundTell, option
@cindex soundChallenge, option
@cindex soundRequest, option
@cindex soundSeek, option
These sounds are triggered in the same way as the colorization events
described above.  They all default to "", no sound.  They are played
only if the colorizeMessages is on.
CShout is synonymous with SShout.
@item -soundMove filename
@cindex soundMove, option
This sound is played when a player other than yourself makes a move.
Default: "$".
@item -soundRoar filename
@cindex soundRoar, option
This sound is played when a Lion makes a hit-and-run or double capture/
Default: "" (no sound).
@item -soundIcsAlarm filename
@cindex soundIcsAlarm, option
This sound is used by the ICS Alarm menu option.  Default: "$".
@item -soundIcsWin filename
@cindex soundIcsWin, option
This sound is played when you win an ICS game.  Default: "" (no sound).
@item -soundIcsLoss filename
@cindex soundIcsLoss, option
This sound is played when you lose an ICS game.  Default: "" (no sound).
@item -soundIcsDraw filename
@cindex soundIcsDraw, option
This sound is played when you draw an ICS game.  Default: "" (no sound).
@item -soundIcsUnfinished filename
@cindex soundIcsUnfinished, option
This sound is played when an ICS game that you are participating in is
aborted, adjourned, or otherwise ends inconclusively.  Default: "" (no
sound).
@end table

@node Load and Save options
@section Load and Save options
@cindex Options, Load and Save
@cindex Load and Save options
@table @asis
@item -lgf or -loadGameFile file
@itemx -lgi or -loadGameIndex index
@cindex lgf, option
@cindex loadGameFile, option
@cindex lgi, option
@cindex loadGameIndex, option
If the @code{loadGameFile} option is set, XBoard loads the specified
game file at startup. The file name @file{-} specifies the standard
input. If there is more than one game in the file, XBoard
pops up a menu of the available games, with entries based on their PGN 
(Portable Game Notation) tags.
If the @code{loadGameIndex} option is set to @samp{N}, the menu is suppressed
and the N th game found in the file is loaded immediately.
The menu is also suppressed if @code{matchMode} is enabled or if the game file
is a pipe; in these cases the first game in the file is loaded immediately.
Use the @file{pxboard} shell script provided with XBoard if you
want to pipe in files containing multiple games and still see the menu.
If the loadGameIndex specifies an index -1, this triggers auto-increment
of the index in @code{matchMode}, which means that after every game the
index is incremented by one, causing each game of the match to be played
from the next game in the file. Similarly, specifying an index value of -2
causes the index to be incremented every two games, so that each game
in the file is used twice (with reversed colors).
The @code{rewindIndex} option causes the index to be reset to the
first game of the file when it has reached a specified value.
@item -rewindIndex n
Causes a position file or game file to be rewound to its beginning after n
positions or games in auto-increment @code{matchMode}. 
See @code{loadPositionIndex} and @code{loadGameIndex}.
default: 0 (no rewind).
@item -td or -timeDelay seconds
@cindex td, option
@cindex timeDelay, option
Time delay between moves during @samp{Load Game} or @samp{Analyze File}. 
Fractional seconds are allowed; try @samp{-td 0.4}. 
A time delay value of -1 tells
XBoard not to step through game files automatically. Default: 1 second.
@item -sgf or -saveGameFile file
@cindex sgf, option
@cindex saveGameFile, option
If this option is set, XBoard appends a record of every game
played to the specified file. The file name @file{-} specifies the
standard output.
@item -autosave/-xautosave or -autoSaveGames true/false
@cindex autosave, option
@cindex autoSaveGames, option
Sets the Auto Save menu option.  @xref{Options Menu}.  Default: false.
Ignored if @code{saveGameFile} is set.
@item -onlyOwnGames true/false
@cindex onlyOwnGames, option
Suppresses auto-saving of ICS observed games. Default: false.
@item -lpf or -loadPositionFile file
@itemx -lpi or -loadPositionIndex index
@cindex lpf, option
@cindex loadPositionFile, option
@cindex lpi, option
@cindex loadPositionIndex, option
If the @code{loadPositionFile} option is set, XBoard loads the
specified position file at startup. The file name @file{-} specifies the
standard input. If the @code{loadPositionIndex} option is set to N,
the Nth position found in the file is loaded; otherwise the
first position is loaded.
If the loadPositionIndex specifies an index -1, this triggers auto-increment
of the index in @code{matchMode}, which means that after every game the
index is incremented by one, causing each game of the match to be played
from the next position in the file. Similarly, specifying an index value of -2
causes the index to be incremented every two games, so that each position
in the file is used twice (with the engines playing opposite colors).
The @code{rewindIndex} option causes the index to be reset to the
first position of the file when it has reached a specified value.
@item -spf or -savePositionFile file
@cindex spf, option
@cindex savePositionFile, option
If this option is set, XBoard appends the final position reached
in every game played to the specified file. The file name @file{-}
specifies the standard output.
@item -positionDir directory
@cindex positionDir, option
Specifies the directory where file browsing should start when using
the @samp{Load Position} menu item.
@item -pgnExtendedInfo true/false
@cindex pgnExtendedInfo, option
If this option is set, XBoard saves depth, score and time used for each 
move that the engine found as a comment in the PGN file.
Default: false.
@item -pgnEventHeader string
@cindex pgnEventHeader, option
Sets the name used in the PGN event tag to string. 
Default: "Computer Chess Game".
@item -pgnNumberTag true/false
@cindex pgnNumberTag, option
Include the (unique) sequence number of a tournament game into the saved
PGN file as a 'number' tag.
Default: false.
@item -saveOutOfBookInfo true/false
@cindex saveOutOfBookInfo, option
Include the information on how the engine(s) game out of its opening book 
in a special 'annotator' tag with the PGN file.
Default: true.
@item -oldsave/-xoldsave or -oldSaveStyle true/false
@cindex oldsave, option
@cindex oldSaveStyle, option
Sets the Old Save Style menu option.  @xref{Options Menu}.  Default: false.
@item -gameListTags string
@cindex gameListTags, option
The character string lists the PGN tags that should be printed in the
Game List, and their order. The meaning of the codes is e=event,
s=site, d=date, o=round, p=players, r=result, w=white Elo, b=black Elo,
t=time control, v=variant, a=out-of-book info, c=result comment.
Default: "eprd"
@item -ini or -settingsFile filename
@itemx -saveSettingsFile filename
@itemx @@filename
@cindex saveSettingsFile, option
@cindex SettingsFile, option
@cindex init, option
@cindex at sign, option
When XBoard encounters an option -settingsFile (or -ini for short),
or @@filename, it tries to read the mentioned file,
and substitutes the contents of it (presumaby more command-line options)
in place of the option.
In the case of -ini or -settingsFile, the name of a successfully read
settings file is also remembered as the file to use for saving settings
(automatically on exit, or on user command).
An option of the form @@filename does not affect saving.
The option -saveSettingsFile does specify a name of the file to use
for saving, without reading any options from it, and is thus also effective
when the file did not exist yet.
So the settings will be saved to the file specified in the last
-saveSettingsFile or succesfull -settingsFile / -ini command,
if any, and in /etc/xboard/xboard.conf otherwise.
Usualy the latter is only accessible for the system administrator, though, 
and will be used to contain system-wide default settings, amongst which
a -saveSettingsFile and -settingsFile options to specify a settings file
accessible to the individual user, such as ~/.xboardrc in the user's
home directory.
@item -saveSettingsOnExit true/false
@cindex saveSettingsOnExit, option
Controls saving of options on the settings file.  @xref{Options Menu}.
Default: true.
@end table

@node User interface options
@section User interface options
@cindex User interface options
@cindex Options, User interface
@table @asis
@item -noGUI
@cindex noGUI, option
Suppresses all GUI functions of XBoard 
(to speed up automated ultra-fast engine-engine games, which you don't want to watch). 
There will be no board or clock updates, no printing of moves, 
and no update of the icon on the task bar in this mode.
@item -logoSize N
@cindex logoSize, option
This option controls the drawing of player logos next to the clocks.
The integer N specifies the width of the logo in pixels;
the logo height will always be half the width.
When N = 0, no logos will be diplayed.
Default: 0.
@item -firstLogo imagefile
@itemx -secondLogo imagefile
@cindex firstLogo, option
@cindex secondLogo, option
Specify the images to be used as player logos when @code{logoSize}
is non-zero, next to the white and black clocks, respectively.
@item -autoLogo true/false
@itemx -logoDir filename
@cindex autoLogo, option
@cindex logoDir, option
When @code{autoLogo} is set, XBoard will search for a PNG image file
with the name of the engine or ICS in the directory specified
by @code{logoDir}.
For a human player it will look for a file <username>.png in this
directory, but only when ~/.logo.png does not provide one.
@item -recentEngines number
@itemx -recentEngineList list
@cindex recentEngines, option
@cindex recentEngineList, option
When the number is larger than zero, it determines how many recently
used engines will be appended at the bottom of the @samp{Engines} menu.
The engines will be saved in your settings file as the option
@code{recentEngineList}, by their nicknames,
and the most recently used one will always be sorted to the top.
If the list after that is longer than the specified number,
the last one is discarded.
Changes in the list will only become visible the next session,
provided you saved the settings.
Default: 6.
@item -oneClickMove true/false
@cindex oneClickMove, option
When set, this option allows you to enter moves by only clicking the to-
or from-square, when only a single legal move to or from that square
is possible.
Double-clicking a piece (or clicking an already selected piece)
will instruct that piece to make the only capture it can legally do.
Default: false.
@item -monoMouse true/false
@cindex monoMouse, option
When set button 1 clicks on empty squares in Edit Position mode
will be interpreted as button 3 clicks, so they place a piece.
Default: false.
@item -movesound/-xmovesound or -ringBellAfterMoves true/false
@cindex movesound, option
@cindex bell, option
@cindex ringBellAfterMoves, option
Sets the Move Sound menu option.  @xref{Options Menu}.  Default: false.
For compatibility with old XBoard versions, -bell/-xbell are also 
accepted as abbreviations for this option.
@item -analysisBell N
@cindex analysisBell, option
When N is non-zero, the Move Sound will be played whenever a new
PV arrives in analysis mode after more than N seconds of analysis.
Default: 0.
@item -exit/-xexit or -popupExitMessage true/false
@cindex exit, option
@cindex popupExitMessage, option
Sets the Popup Exit Message menu option.  @xref{Options Menu}. Default: true.
@item -popup/-xpopup or -popupMoveErrors true/false
@cindex popup, option
@cindex popupMoveErrors, option
Sets the Popup Move Errors menu option.  @xref{Options Menu}. Default: false.
@item -queen/-xqueen or -alwaysPromoteToQueen true/false
@cindex queen, option
@cindex alwaysPromoteToQueen, option
Sets the Always Queen menu option.  @xref{Options Menu}.  Default: false.
@item -sweepPromotions true/false
@cindex sweepPromotion, option
Sets the @samp{Almost Always Promote to Queen} menu option.  
@xref{Options Menu}.  Default: false.
@item -legal/-xlegal or -testLegality true/false
@cindex legal, option
@cindex testLegality, option
Sets the Test Legality menu option.  @xref{Options Menu}.  Default: true.
@item -size or -boardSize (sizeName | n1,n2,n3,n4,n5,n6,n7)
@cindex size, option
@cindex boardSize, option
@cindex board size
Determines how large the board will be, by selecting the pixel size
of the pieces and setting a few related parameters.
The sizeName can be one of: Titanic, giving 129x129 pixel pieces,
Colossal 116x116, Giant 108x108, Huge 95x95, Big 87x87, Large 80x80, Bulky 72x72,
Medium 64x64, Moderate 58x58, Average 54x54, Middling 49x49, Mediocre
45x45, Small 40x40, Slim 37x37, Petite 33x33, Dinky 29x29, Teeny 25x25,
or Tiny 21x21.
Xboard installs with a set of scalable (svg) piece images,
which it scales to any of the requested sizes.
The square size can further be continuously scaled by sizing the board window,
but this only adapts the size of the pieces,
and has no effect on the width of the grid lines or the font choice
(both of which would depend on he selected boardSize).
The default depends on the size of your screen; it is approximately the
largest size that will fit without clipping.

You can select other sizes or vary other layout parameters by providing
a list of comma-separated values (with no spaces) as the argument.
You do not need to provide all the values; for any you omit from the
end of the list, defaults are taken from the nearest built-in size.
The value @code{n1} gives the piece size, @code{n2} the width of the
black border
between squares, @code{n3} the desired size for the 
clockFont, @code{n4} the desired size for the coordFont,
@code{n5} the desired size for the messageFont,
@code{n6} the smallLayout flag (0 or 1), 
and @code{n7} the tinyLayout flag (0 or 1).  
All dimensions are in pixels.
If the border between squares is eliminated (0 width), the various
highlight options will not work, as there is nowhere to draw the highlight.
If smallLayout is 1 and @code{titleInWindow} is true, 
the window layout is rearranged to make more room for the title.
If tinyLayout is 1, the labels on the menu bar are abbreviated
to one character each and the buttons in the button bar are made narrower.
@item -overrideLineGap n
@cindex overrideLineGap, option
When n >= 0, this forces the width of the black border between squares
to n pixels for any board size. Mostly used to suppress the grid
entirely by setting n = 0, e.g. in xiangqi or just getting a prettier
picture. When n < 0 this the size-dependent width of the grid lines
is used. Default: -1.
@item -coords/-xcoords or -showCoords true/false
@cindex coords, option
@cindex showCoords, option
Sets the Show Coords menu option.  @xref{Options Menu}.  Default: false.
The @code{coordFont} option specifies what font to use.
@item -autoraise/-xautoraise or -autoRaiseBoard true/false
@cindex autoraise, option
@cindex autoRaiseBoard, option
Sets the Auto Raise Board menu option.  @xref{Options Menu}.  Default: true.
@item -autoflip/-xautoflip or -autoFlipView true/false
@cindex autoflip, option
@cindex autoFlipView, option
Sets the Auto Flip View menu option.  @xref{Options Menu}.  Default: true.
@item -flip/-xflip or -flipView true/false
@cindex flip, option
@cindex flipView, option
If Auto Flip View is not set, or if you are observing but not participating
in a game, then the positioning of the board at the start of each game
depends on the flipView option.  If flipView is false (the default),
the board is positioned so that the white pawns move from the bottom to the
top; if true, the black pawns move from the bottom to the top.
In any case, the Flip menu option (see @ref{Options Menu})
can be used to flip the board after
the game starts.
@item -title/-xtitle or -titleInWindow true/false
@cindex title, option
@cindex titleInWindow, option
If this option is true, XBoard displays player names (for ICS
games) and game file names (for @samp{Load Game}) inside its main
window. If the option is false (the default), this information is
displayed only in the window banner. You probably won't want to
set this option unless the information is not showing up in the
banner, as happens with a few X window managers.
@item -buttons/-xbuttons or -showButtonBar True/False
@cindex buttons, option
@cindex showButtonBar, option
If this option is False, xboard omits the [<<] [<] [P] [>] [>>] button
bar from the window, allowing the message line to be wider.  You can
still get the functions of these buttons using the menus or their keyboard
shortcuts.  Default: true.
@item -evalZoom factor
@cindex evalZoom, option
The score interval (-1,1) is blown up on the vertical axis of
the Evaluation Graph by the given factor.
Default: 1
@item -evalThreshold n
@cindex evalThreshold, option
Score below n (centiPawn) are plotted as 0 in the Evaluation Graph.
Default: 25
@item -mono/-xmono or -monoMode true/false
@cindex mono, option
@cindex monoMode, option
Determines whether XBoard displays its pieces and squares with
two colors (true) or four (false). You shouldn't have to
specify @code{monoMode}; XBoard will determine if it is necessary.
@item -showTargetSquares true/false
@cindex showTargetSquares, option
Determines whether XBoard can highlight the squares a piece has
legal moves to, when you grab that piece with the mouse.
Default: false.
@item -flashCount count
@itemx -flashRate rate
@itemx -flash/-xflash
@cindex flashCount, option
@cindex flashRate, option
@cindex flash, option
@cindex xflash, option
These options enable flashing of pieces when they
land on their destination square.
@code{flashCount}
tells XBoard how many times to flash a piece after it
lands on its destination square.
@code{flashRate}
controls the rate of flashing (flashes/sec).
Abbreviations:
@code{flash}
sets flashCount to 3.
@code{xflash}
sets flashCount to 0.
Defaults:  flashCount=0 (no flashing), flashRate=5.
@item -highlight/-xhighlight or -highlightLastMove true/false
@cindex highlight, option
@cindex highlightLastMove, option
Sets the Highlight Last Move menu option. @xref{Options Menu}. Default: false.
@item -highlightMoveWithArrow true/false
@cindex highlight Arrow, option
@cindex highlightMoveWithArrow, option
Sets the Highlight with Arrow menu option. @xref{Options Menu}. Default: false.
@item -blind/-xblind or -blindfold true/false
@cindex blind, option
@cindex blindfold, option
Sets the Blindfold menu option.  @xref{Options Menu}.  Default: false.
@item -periodic/-xperiodic or -periodicUpdates true/false
@cindex periodic, option
@cindex periodicUpdates, option
Controls updating of current move andnode counts in analysis mode. Default: true.
@item -fSAN
@itemx -sSAN
@cindex fSAN, option
@cindex sSAN, option
Causes the PV in thinking output of the mentioned engine to be converted 
to SAN before it is further processed.
Warning: this might lose engine output not understood by the parser,
and uses a lot of CPU power.
Default: the PV is displayed exactly as the engine produced it.
@item -showEvalInMoveHistory true/false
@cindex showEvalInMoveHistory, option
Controls whether the evaluation scores and search depth of engine moves
are displayed with the move in the move-history window.
Default: true.
@item -clockFont font
@cindex clockFont, option
@cindex Font, clock
The font used for the clocks. If the option value is a pattern
that does not specify the font size, XBoard tries to choose an
appropriate font for the board size being used.
Default Xaw: -*-helvetica-bold-r-normal--*-*-*-*-*-*-*-*.
Default GTK: Sans Bold %d.
@item -coordFont font
@cindex coordFont, option
@cindex Font, coordinates
The font used for rank and file coordinate labels if @code{showCoords}
is true. If the option value is a pattern that does not specify
the font size, XBoard tries to choose an appropriate font for
the board size being used.
Default Xaw: -*-helvetica-bold-r-normal--*-*-*-*-*-*-*-*.
Default GTK: Sans Bold %d.
@item -messageFont font
@cindex messageFont, option
@cindex Font, message
The font used for popup dialogs, menus, etc.
If the option value is a pattern that does not specify
the font size, XBoard tries to choose an appropriate font for
the board size being used.
Default Xaw: -*-helvetica-medium-r-normal--*-*-*-*-*-*-*-*.
Default GTK: Sans Bold %d
@item -tagsFont font
@cindex tagsFont, option
@cindex Font, tags
The font used in the Edit Tags dialog.
If the option value contains %d, XBoard will replace it by
an appropriate font for the board size being used.
(Only used in GTK build.)
Default: Sans Normal %d.
@item -commentFont font
@cindex commentFont, option
@cindex Font, comment
The font used in the Edit Comment dialog.
If the option value contains %d, XBoard will replace it by
an appropriate font for the board size being used.
(Only used in GTK build.)
Default: Sans Normal %d.
@item -icsFont font
@cindex icsFont, option
@cindex Font, ics
The font used to display ICS output in the ICS  Chat window.
As ICS output often contains tables aligned by spaces,
a mono-space font is recommended here.
If the option value contains %d, XBoard will replace it by
an appropriate font for the board size being used.
(Only used in GTK build.)
Default: Monospace Normal %d.
@item -moveHistoryFont font
@cindex moveHistoryFont, option
@cindex Font, moveHistory
The font used in Move History and Engine Output windows.
As these windows display mainly moves,
one could use a figurine font here.
If the option value contains %d, XBoard will replace it by
an appropriate font for the board size being used.
(Only used in GTK build.)
Default: Sans Normal %d.
@item -gameListFont font
@cindex gameListFont, option
@cindex Font, gameList
The font used in the listbox of the Game List window.
If the option value contains %d, XBoard will replace it by
an appropriate font for the board size being used.
(Only used in GTK build.)
Default: Sans Bold %d.
@item -fontSizeTolerance tol
@cindex fontSizeTolerance, option
In the font selection algorithm, a nonscalable font will be preferred
over a scalable font if the nonscalable font's size differs
by @code{tol} pixels
or less from the desired size.  A value of -1 will force
a scalable font to always be used if available; a value of 0 will
use a nonscalable font only if it is exactly the right size; 
a large value (say 1000) will force a nonscalable font to always be
used if available.  Default: 4.
@item -pid or -pieceImageDirectory dir
@cindex pid, option
@cindex pieceImageDirectory, option
This options control what piece images xboard uses.
XBoard will look in the specified directory for an image in png
or svg format for every piece type, with names like BlackQueen.svg,
WhiteKnight.svg etc.
When neither of these is found (or no valid directory is specified)
XBoard will first ty to use an image White/BlackTile.svg in that same
directory, and if that is not present either
use the svg piece that was installed with it
(from the source-tree directory @samp{svg}).
Both svg and png images will be scaled by XBoard to the required size,
but the png pieces lose much in quality when scaled too much.
Default: "".
@item -inscriptions utf8string
@cindex inscriptions, option
The positions in the utf8string correspond to XBoard's piece types,
and for each type a glyph can be defined.
This glyph will then be rendered on top of the image for the piece.
This is useful in combination with the White/BlackTile.svg images,
which could be the image of a blank Shogi tile, for writing the
kanji piece name on top of it on the fly.
Default: "".

@item -whitePieceColor color
@itemx -blackPieceColor color
@itemx -lightSquareColor color
@itemx -darkSquareColor color
@itemx -highlightSquareColor color
@itemx -preoveHighlightColor color
@itemx -lowTimeWarningColor color
@cindex Colors
@cindex whitePieceColor, option
@cindex blackPieceColor, option
@cindex lightSquareColor, option
@cindex darkSquareColor, option
@cindex highlightSquareColor, option
@cindex premoveHighlightColor, option
@cindex lowTimeWarningColor, option
Colors to use for the pieces, squares, and square highlights.
Defaults:

@example
-whitePieceColor       #FFFFCC
-blackPieceColor       #202020
-lightSquareColor      #C8C365
-darkSquareColor       #77A26D
-highlightSquareColor  #FFFF00
-premoveHighlightColor #FF0000
-lowTimeWarningColor   #FF0000
@end example

On a grayscale monitor you might prefer:

@example
-whitePieceColor       gray100
-blackPieceColor       gray0
-lightSquareColor      gray80
-darkSquareColor       gray60
-highlightSquareColor  gray100
-premoveHighlightColor gray70
-lowTimeWarningColor   gray70
@end example

The PieceColor options only work properly if the image files
defining the pieces were pure black & white
(possibly anti-aliased to produce gray scales
and semi-transparancy),
like the pieces images that come with the install.
Their effect on colored pieces is undefined.
The SquareColor option only have an effect
when no board textures are used.
@item -trueColors true/false
@cindex trueColors, option
When set, this option suppresses the effect  of the
PieceColor options mentioned above.
This is recommended for images that are already colored.
@item -useBoardTexture true/false
@itemx -liteBackTextureFile filename
@itemx -darkBackTextureFile filename
@cindex useBoardTexture, option
@cindex liteBackTextureFile, option
@cindex darkBackTextureFile, option
Indicate the png image files to be used for drawing the board squares, 
and if they should be used rather than using simple colors.
The algorithm for cutting squares out of a given bitmap is such that
the picture is perfectly reproduced when a bitmap the size of
the complete board is given.
If the filename ends in "-NxM.png", with integer N and M,
it is assumed to contain a bitmap of a complete board of N files
and M ranks, and XBoard will scale it to exactly match the
current square size.
If N=M=0 it scales the entire bitmap to the size of the board,
irrespective of the number of files and ranks of the latter.
Without any -NxM suffix textures are only blown up by an integer
factor when they are smaller than the square size, or,
when the name starts with "xq", too small to cover the
complete Xiangqi board.
Default: false and ""
@item -drag/-xdrag or -animateDragging true/false
@cindex drag, option
@cindex animateDragging, option
Sets the Animate Dragging menu option. @xref{Options Menu}.  Default: true.
@item -animate/-xanimate or -animateMoving true/false
@cindex animate, option
@cindex animateMoving, option
Sets the Animate Moving menu option. @xref{Options Menu}.  Default: true.
@item -animateSpeed n
@cindex -animateSpeed, option
Number of milliseconds delay between each animation frame when Animate
Moves is on.
@item -autoDisplayComment true/false
@itemx -autoDisplayTags true/false
@cindex -autoDisplayComment, option
@cindex -autoDisplayTags, option
If set to true, these options cause the window with the move comments,
and the window with PGN tags, respectively, to pop up automatically when
such tags or comments are encountered during the replaying a stored or
loaded game.  Default: true.
@item -pasteSelection true/false
@cindex -pasteSelection, option
If this option is set to true, the Paste Position and Paste Game
options paste from the currently selected text.  If false, they paste
from the clipboard.  Default: false.
@item -autoCopyPV true|false
@cindex autoCopyPV, option
When this option is set, the position displayed on the board when
you terminate a PV walk 
(initiated by a right-click on board or engine-output window)
will be automatically put on the clipboard as FEN.
Default: false.
@item -dropMenu true|false
@cindex dropMenu, option
This option allows you to emulate old behavior, 
where the right mouse button brings up the (now deprecated) drop menu 
rather than displaying the position at the end of the principal variation. 
Default: False.
@item -pieceMenu true|false
@cindex pieceMenu, option
This option allows you to emulate old behavior, 
where the right mouse button brings up the (now deprecated) piece menu
in Edit Position mode.
From this menu you can select the piece to put on the square you
clicked to bring up the menu,
or select items such as @kbd{clear board}.
You can also @kbd{promote} or @kbd{demote} a clicked piece to convert
it into an unorthodox piece that is not directly in the menu,
or give the move to @kbd{black} or @kbd{white}.
@item -variations true|false
@cindex variations, option
When this option is on, you can start new variations in Edit Game or
Analyze mode by holding the Shift key down while entering a move.
When it is off, the Shift key will be ignored.
Default: False.
@item -appendPV true|false
@cindex appendPV, option
When this option is on, a button 3 click left of a PV in the Engine
Output window will play the first move of that PV in Analyze mode,
or as many moves as you walk through it by moving the mouse.
Default: False.
@item -absoluteAnalysisScores true|false
@cindex absoluteAnalysisScores, option
When true, scores on the Engine Output window during analysis
will be printed from the white point-of-view, rather than the
side-to-move point-of-view.
Default: False.
@item -scoreWhite true|false
@cindex scoreWhite, option
When true, scores will always be printed from the white point-of-view, 
rather than the side-to-move point-of-view.
Default: False.
@item -memoHeaders true|false
@cindex memoHeaders, option
When true, column headers will be displayed in the Engine Output window
for the depth, score, time and nodes data.
A button 3 click on these headers will hide or show the corresponding data.
(Not intended for dynamic use, as already printed data of the current search
will not be affected!)
Defaul: False.
@end table

@node Adjudication Options
@section Adjudication Options
@cindex Options, adjudication
@table @asis
@item -adjudicateLossThreshold n
@cindex adjudicateLossThreshold, option
If the given value is non-zero, XBoard adjudicates the game as a loss 
if both engines agree for a duration of 6 consecutive ply that the score 
is below the given score threshold for that engine. Make sure the score 
is interpreted properly by XBoard, 
using @code{-firstScoreAbs} and @code{-secondScoreAbs} if needed. 
Default: 0 (no adjudication)
@item -adjudicateDrawMoves n
@cindex adjudicateDrawMoves, option
If the given value is non-zero, XBoard adjudicates the game as a draw 
if after the given number of moves it was not yet decided. Default: 0 (no adjudication)
@item -checkMates true/false
@cindex checkMates, option
If this option is set, XBoard detects all checkmates and stalemates, 
and ends the game as soon as they occur. 
Legality-testing must be switched on for this option to work.
Default: true
@item -testClaims true/false
@cindex testClaims, option
If this option is set, XBoard verifies all result claims made by engines, 
and those who send false claims will forfeit the game because of it. 
Legality-testing must be switched on for this option to work. Default: true
@item -materialDraws true/false
@cindex materialDraws, option
If this option is set, XBoard adjudicates games as draws when there is 
no sufficient material left to inflict a checkmate. 
This applies to KBKB with like bishops (any number, actually), and to KBK, KNK and KK. 
Legality-testing must be switched on for this option to work. Default: true
@item -trivialDraws true/false
@cindex trivialDraws, option
If this option is set, XBoard adjudicates games as draws that cannot be 
usually won without opponent cooperation. This applies to KBKB with unlike bishops, 
and to KBKN, KNKN, KNNK, KRKR and KQKQ. The draw is called after 6 ply into these end-games, 
to allow quick mates that can occur in some exceptional positions to be found by the engines. 
KQKQ does not really belong in this category, and might be taken out in the future. 
(When bitbase-based adjudications are implemented.) 
Legality-testing must be on for this option to work. Default: false
@item -ruleMoves n
@cindex ruleMoves, option
If the given value is non-zero, XBoard adjudicates the game as a draw after the given 
number of consecutive reversible moves. Engine draw claims are always accepted after 50 moves, 
irrespective of the given value of n.
@item -repeatsToDraw n
If the given value is non-zero, xboard adjudicates the game as a draw if a position 
is repeated the given number of times. Engines draw claims are always accepted after 3 repeats, 
(on the 3rd occurrence, actually), irrespective of the value of n. 
Beware that positions that have different castling or en-passant rights do not count 
as repeats, XBoard is fully e.p. and castling aware!
@end table

@node Install options
@section Install options
@cindex Options, install
@table @asis
@item --show-config parameter
@cindex show-config, option
When called with this option, XBoard will close immediately after printing the
value of the indicated configuration parameter, or, when no parameter was given,
after printing a list of all such parameters.
Currently the only valid values for parameter are Datadir and Sysconfdir.
This option can be used by install scripts for board themes
to figure out where the currently active XBoard stores its data.
@item -date timestamp
@itemx -saveDate timestamp
@cindex date, option
@cindex saveDate, option
These options specify an epoch as an integer number.
The @code{saveDate} option is written by XBoard in the settings file every time the
settings are saved, with the current time, so that later runs of XBoard can know this.
The @code{date} option can be included in settings files to indicate when lines
following it were added to those files.
Some options will be ignored if the epoch specified by the latest @code{date} option
predates the -saveDate setting (implying they must have been seen before).
@item -autoInstall list
@cindex autoInstall, option
When the list is set to a non-empty string, XBoard will scan the
operating system's plugin directory for engines supporting UCI
and XBoard protocol at startup.
When it finds an engine that was installed after it last saved
its settings, a line to launch that engine (as per specs in
the plugin file) is appended to the -firstChessProgramNames
list of installed engines.
In the future it will be possible to use the autoInstall list to limit
this automatic adding of engines based on the chess variant they play.
@item -addMasterOption string
@cindex addMasterOption, option
Adds the mentioned string as an additional line of XBoard's master settings file,
after adding a line with a @code{date} option to timestamp it.
Intended to add options of the 'install' type (see below) to the master file,
which will then be processed by any XBoard that has not seen them since
it last saved its settings.
@item -autoClose
@cindex autoClose, option
The presence of this option cause XBoard to close immediately after processing
all its options (from settings file and command line).
Typically used from install scripts together with options that change XBoard's
settings files, so that XBoard can be run in batch mode rather than interactively.
@item -installEngine string
@cindex installEngine, option
Adds the given string as an additional line to the value of the
@code{firstChessProgramNames} option when the -saveDate setting preceeds the -date setting.
Intended for adding to the master settings file with the aid of -addMasterOption
in the install script of engines, as a method for broadcasting the presence
of a new engine to all users,
which would then see it automatically registered with XBoard.
Made obsolete by the advent of the plugin standard (see the @code{autoInstall} option),
which broadcasts such presence in a non-XBoard-specific way
by dropping *.eng files in a certain system directory.
@item -installTheme string
@cindex installTheme, option
Adds the given string as an additional line to the value of the
-themeNames option when the -saveDate setting preceeds the -date setting.
Intended for adding to the master settings file with the aid of -addMasterOption
in the install script of board graphics themes,
as a method for broadcasting the availability of a new theme to all users,
who would then see the theme appear automatically in the listbox in the
View Board menu dialog next time they run XBoard.
@end table

@node Other options
@section Other options
@cindex Options, miscellaneous
@table @asis
@item -ncp/-xncp or -noChessProgram true/false
@cindex ncp, option
@cindex noChessProgram, option
If this option is true, XBoard acts as a passive chessboard; it
does not start a chess engine at all. Turning on this option
also turns off clockMode. Default: false.
@item -viewer
@itemx -viewerOptions string
@cindex viewer, option
@cindex viewerOptions, option
Presence of the volatile option @code{viewer} on the command line
will cause the value of the persistent option @code{viewerOptions}
as stored in the settings file to be appended to the command line.
The @code{view} option will be used by desktop associations with
game or position file types, so that @code{viewerOptions} can be
used to configure the exact mode XBoard will start in when it
should act on such a file (e.g. in -ncp mode, or analyzing
with your favorite engine). The options are also automatically
appended when Board is invoked with a single argument not being
an option name, which is then assumed to be the name of a
@code{loadGameFile} or (when the name ends in .fen) a
@code{loadPositionFile}.
Default: "-ncp -engineOutputUp false -saveSettingsOnExit false".
@item -tourneyOptions string
@cindex tourneyOptions, option
When XBoard is invoked with a single argument that is a file
with .trn extension, it will assume this argument to be the value
of a @code{tourneyFile} option,
and append the value of the persistent option @code{tourneyOptions}
as stored in the settings file to the command line.
Thus the value of @code{tourneyOptions} can be
used to configure XBoard to automatically start running a
tournament when it should act on such a file.
Default: "-ncp -mm -saveSettingsOnExit false".
@item -mode or -initialMode modename
@cindex mode, option
@cindex initalMode, option
If this option is given, XBoard selects the given modename
from the Mode menu after starting and (if applicable) processing the
loadGameFile or loadPositionFile option. Default: "" (no selection). 
Other supported values are 
MachineWhite, MachineBlack, TwoMachines, Analysis, 
AnalyzeFile, EditGame, EditPosition, and Training.
@item -variant varname
@cindex variant, option
Activates  (sometimes partial) support for playing chess variants
against a local engine or editing variant games.  This flag is not
needed in ICS mode.  Recognized variant names are:

@example
normal        Normal chess
wildcastle    Shuffle chess, king can castle from d file
nocastle      Shuffle chess, no castling allowed
fischerandom  Fischer Random shuffle chess
bughouse      Bughouse, ICC/FICS rules
crazyhouse    Crazyhouse, ICC/FICS rules
losers        Lose all pieces or get mated (ICC wild 17)
suicide       Lose all pieces including king (FICS)
giveaway      Try to have no legal moves (ICC wild 26)
twokings      Weird ICC wild 9
kriegspiel    Opponent's pieces are invisible
atomic        Capturing piece explodes (ICC wild 27)
3check        Win by giving check 3 times (ICC wild 25)
shatranj      An ancient precursor of chess (ICC wild 28)
xiangqi       Chinese Chess (on a 9x10 board)
shogi         Japanese Chess (on a 9x9 board & piece drops) 
capablanca    Capablanca Chess (10x8 board, with Archbishop 
              and Chancellor pieces)
gothic        similar, with a better initial position
caparandom    An FRC-like version of Capablanca Chess (10x8) 
janus         A game with two Archbishops (10x8 board)
courier       Medieval intermediate between shatranj and 
              modern Chess (on 12x8 board) 
falcon        Patented 10x8 variant with two Falcon pieces
berolina      Pawns capture straight ahead, and move diagonally 
cylinder      Pieces wrap around the board edge
knightmate    King moves as Knight, and vice versa 
super         Superchess (shuffle variant with 4 exo-pieces)
makruk        Thai Chess (shatranj-like, P promotes on 6th rank)
asean         ASEAN Chess (a modernized version of Makruk)
spartan       Spartan Chess (black has unorthodox pieces)
great         Great Shatranj, a 10x8 variant without sliders
grand         Grand Chess, on 10x10 with Capablanca pieces
lion          Mighty-Lion Chess, with a multi-capturing Lion
elven         Eleven Chess, with Lion and crowned sliders on 10x10
chu           Chu Shogi, historic 12x12 variant with 2x46 pieces
fairy         A catchall variant in which all piece types 
              known to XBoard can participate (8x8)
unknown       Catchall for other unknown variants
@end example

In the shuffle variants, XBoard does shuffle the pieces, although
you can still do it by hand using Edit Position.  Some variants are
supported only in ICS mode, including bughouse, and
kriegspiel.
Berolina and cylinder chess are only partially supported,
and can only be played with legality testing off.

Apart from these standard variants, engines can define variants
of arbitrary names, briefing XBoard transparently on the rules
for piece movement, board size and initial setup,
so that they work nearly as well as fully-supported standard variants.
(But obviously only while using that engine.)
The user might have to alter the adjudication settings for some
variants, however. E.g. it makes no sense to adjudicate a draw
after 50 reversible moves in variants that have a 64-move rule,
or no similar rule at all.

Default: "normal". Except when the first engine gave an explicit list
of variants it supports, and 'normal' is not amongst those.
In that case the first variant the engine mentioned it did play will
be chosen.
@item -boardHeight N
@cindex boardHeight, option
Allows you to set a non-standard number of board ranks in any variant. 
If the height is given as -1, the default height for the variant is used.
Default: -1
@item -boardWidth N
@cindex boardWidth, option
Allows you to set a non-standard number of board files in any variant. 
If the width is given as -1, the default width for the variant is used. 
With a non-standard width, the initial position will always be an empty board, 
as the usual opening array will not fit.
Default: -1
@item -holdingsSize N
@cindex holdingsSize, option
Allows you to set a non-standard size for the holdings in any variant. 
If the size is given as -1, the default holdings size for the variant is used. 
The first N piece types will go into the holdings on capture, and you will be 
able to drop them on the board in stead of making a normal move. If size equals 0, 
there will be no holdings.
Default: -1
@item -defaultFrcPosition N
@cindex defaultFrcPosition, option
Specifies the number of the opening position in shuffle games like Chess960. 
A value of -1 means the position is randomly generated by XBoard
at the beginning of every game.
Default: -1
@item -pieceToCharTable string
@cindex pieceToCharTable, option
The characters that are used to represent the piece types XBoard knows in FEN 
diagrams and SAN moves.
You should not have to use this option often: each variant has its own default 
setting for the piece representation in FEN, which should be sufficient in normal use.
The string argument has to specify an even number of pieces 
(or it will be ignored), as white and black pieces have to be given separately 
(in that order). The last letter for each color will be the King. 
The letters before that will be PNBRQ and then a whole host of fairy pieces 
in an order that has not fully crystallized yet (currently FEACWMOHIJGDVLSU, 
F=Ferz, Elephant, A=Archbishop, C=Chancellor, W=Wazir, M=Commoner, O=Cannon, 
H=Nightrider). You should list at least all pieces that occur in the variant 
you are playing. If you have fewer characters in the string than XBoard has
pieces, the pieces not mentioned will get assigned a period,
and will not be usable in the variant.
You can also explicitly assign pieces a period, in which case they 
will not be counted in deciding which captured pieces can go into the holdings.
A tilde '~' as a piece name does mean this piece is used to represent a promoted 
Pawn in crazyhouse-like games, i.e. on capture it turns back to a Pawn. 
A '+' similarly indicates the piece is a shogi-style promoted piece, that should 
revert to its non-promoted version on capture (rather than to a Pawn).
By default the second 11 pieces known to XBoard are the promoted forms of the first 11.
A piece specified by the character combination ^ plus letter will be assumed
to be the promoted form of the piece indicated by that letter,
and get a '+' assigned.
To get around the limitation of the alphabet,
piece IDs can also be 'dressed letters', i.e. a single letter
(upper case for white, lower case for black)
followed by a single quote or an exclamation point.
Default: "" (meaning the default for the variant is used).
@item -pieceNickNames string
@cindex pieceNickNames, option
The characters in the string are interpreted the same way as in the
@code{pieceToCharTable} option. But on input, piece-ID letters are
first looked up in the nicknames, and only if not defined there,
in the normal pieceToCharTable. This allows you to have two letters
designate the same piece, (e.g. N as an alternative to H for Horse
in Xiangqi), to make reading of non-compliant notations easier.
Default: ""
@item -colorNickNames string
@cindex colorNickNames, option
The side-to-move field in a FEN will be first matched against the letters
in the string (first character for white, second for black),
before it is matched to the regular 'w' and 'b'.
This makes it easier to read non-compliant FENs,
which, say, use 'r' for white.
Default: ""
@item -debug/-xdebug or -debugMode true/false
@cindex debug, option
@cindex debugMode, option
Turns on debugging printout.
@item -debugFile filename or -nameOfDebugFile filename
@cindex debugFile, option
@cindex nameOfDebugFile, option
Sets the name of the file to which XBoard saves debug information 
(including all communication to and from the engines).
A @kbd{%d} in the given file name (e.g. game%d.debug) will be replaced
by the unique sequence number of a tournament game,
so that the debug output of each game will be written on a separate file.
@item -engineDebugOutput number
@cindex engineDebugOutput, option
Specifies how XBoard should handle unsolicited output from the engine, 
with respect to saving it in the debug file. 
The output is further (hopefully) ignored. 
If number=0, XBoard refrains from writing such spurious output to the debug file. 
If number=1, all engine output is written faithfully to the debug file. 
If number=2, any protocol-violating line is prefixed with a '#' character, 
as the engine itself should have done if it wanted to submit info for inclusion in the debug file.
This option is provided for the benefit of applications that use the debug file 
as a source of information, such as the broadcaster of live games TLCV / TLCS. 
Such applications can be protected from spurious engine output that might otherwise confuse them.
@item -rsh or -remoteShell shell-name
@cindex rsh, option
@cindex remoteShell, option
Name of the command used to run programs remotely. The default
is @file{rsh} or @file{remsh}, determined when XBoard is
configured and compiled.
@item -ruser or -remoteUser user-name
@cindex ruser, option
@cindex remoteUser, option
User name on the remote system when running programs with the
@code{remoteShell}. The default is your local user name.
@item -userName username
@cindex userName, option
Name under which the Human player will be listed in the PGN file. 
Default is the login name on your local computer.
@item -delayBeforeQuit number
@itemx -delayAfterQuit number
@cindex delayBeforeQuit, option
@cindex delayAfterQuit, option
These options order pauses before and after sending the "quit" command to an engine that must be terminated.
The pause between quit and the previous command is specified in milliseconds.
The pause after quit is used to schedule a kill signal to be sent to the engine process after the
number of specified seconds plus one.
This signal is a different one as the terminiation signal described in the protocol specs
which engines can suppress or ignore, and which is sent directly after the "quit" command.
Setting @code{delayAfterQuit} to -1 will suppress sending of the kill signal.
Default: 0
@item -searchMode n
@cindex searchMode, option
The integer n encodes the mode for the @samp{find position} function.
Default: 1 (= Exact position match)
@item -eloThresholdBoth elo
@itemx -eloThresholdAny elo
@cindex eloThresholdBoth, option
@cindex eloThresholdAny, option
Defines a lower limit for the Elo rating, which has to be surpassed
before a game will be considered when searching for a board position.
Default: 0
@item -dateThreshold year
@cindex dateThreshold, option
Only games not played before the given year will be considered when
searching for a board position


@end table

@node Chess Servers
@chapter Chess Servers
@cindex ICS
@cindex ICS, addresses
@cindex Internet Chess Server
An @dfn{Internet Chess Server}, or @dfn{ICS}, is a place on the
Internet where people can get together to play chess, watch other
people's games, or just chat.  You can use either @code{telnet} or a
client program like XBoard to connect to the server.  There are
thousands of registered users on the different ICS hosts, and it is
not unusual to meet 200 on both chessclub.com and freechess.org.

Most people can just type @kbd{xboard -ics} to start XBoard as an ICS
client.  Invoking XBoard in this way connects you to the Internet
Chess Club (ICC), a commercial ICS.  You can log in there as a guest
even if you do not have a paid account.  To connect to the largest
Free ICS (FICS), use the command @kbd{xboard -ics -icshost freechess.org}
instead, or substitute a different host name to connect to your
favorite ICS.
For a full description of command-line options that control 
the connection to ICS and change the default values of ICS options, see
@ref{ICS options}.  

While you are running XBoard as an ICS client,
you use the terminal window that you started XBoard from
as a place to type in commands and read information that is
not available on the chessboard.

The first time you need to use the terminal is to enter your login name
and password, if you are a registered player. (You don't need to do
this manually; the @code{icsLogon} option can do it for you.
@pxref{ICS options}.)  If you are not registered, 
enter @kbd{g} as your name, and the server will pick a
unique guest name for you.

Some useful ICS commands
include
@table @kbd
@item help <topic>
@cindex help, ICS command
to get help on the given <topic>. To get a list of possible topics type
@dfn{help} without topic.  Try the help command before you ask other
people on the server for help.

For example @kbd{help register} tells you how to become a registered
ICS player.
@item who <flags>
@cindex who, ICS command
to see a list of people who are logged on.  Administrators
(people you should talk to if you have a problem) are marked
with the character @samp{*}, an asterisk. The <flags> allow you to
display only selected players: For example, @kbd{who of} shows a
list of players who are interested in playing but do not have
an opponent.
@item games
@cindex games, ICS command
to see what games are being played
@item match <player> [<mins>] [<inc>]
to challenge another player to a game. Both opponents get <mins> minutes
for the game, and <inc> seconds will be added after each move.
If another player challenges you, the server asks if you want to
accept the challenge; use the @kbd{accept} or @kbd{decline} commands
to answer.
@item accept
@itemx decline
@cindex accept, ICS command
@cindex decline, ICS command
to accept or decline another player's offer. 
The offer may be to start a new game, or to agree to a 
@kbd{draw}, @kbd{adjourn} or @kbd{abort} the current game. @xref{Action Menu}.

If you have more than one pending offer (for example, if more than one player
is challenging you, or if your opponent offers both a draw and to adjourn the
game), you have to supply additional information, by typing something
like @kbd{accept <player>}, @kbd{accept draw}, or @kbd{draw}.
@item draw
@itemx adjourn
@itemx abort
@cindex draw, ICS command
@cindex adjourn, ICS command
@cindex abort, ICS command
asks your opponent to terminate a game by mutual agreement. Adjourned
games can be continued later. 
Your opponent can either @kbd{decline} your offer or accept it (by typing the
same command or typing @kbd{accept}).  In some cases these commands work
immediately, without asking your opponent to agree.  For example, you can
abort the game unilaterally if your opponent is out of time, and you can claim
a draw by repetition or the 50-move rule if available simply by typing 
@kbd{draw}.
@item finger <player>
@cindex finger, ICS command
to get information about the given <player>. (Default: yourself.)
@item vars
@cindex vars, ICS command
to get a list of personal settings
@item set <var> <value>
@cindex set, ICS command
to modify these settings
@item observe <player>
@cindex observe, ICS command
to observe an ongoing game of the given <player>.
@item examine
@itemx oldmoves
@cindex examine, ICS command
@cindex oldmoves, ICS command
to review a recently completed game
@end table

Some special XBoard features are activated when you are
in examine mode on ICS.  See the descriptions of the menu commands
@samp{Forward}, @samp{Backward}, @samp{Pause}, @samp{ICS Client}, 
and @samp{Stop Examining} on the @ref{Edit Menu}, @ref{Mode Menu}, and
@ref{Action Menu}.

@node Firewalls
@chapter Firewalls
By default, XBoard communicates with an Internet Chess Server
by opening a TCP socket directly from the machine it is running on
to the ICS. If there is a firewall between your machine and the ICS,
this won't work. Here are some recipes for getting around common
kinds of firewalls using special options to XBoard.
Important: See the paragraph in the below about extra echoes, in
@ref{Limitations}.

Suppose that you can't telnet directly to ICS, but you can telnet
to a firewall host, log in, and then telnet from there to ICS.
Let's say the firewall is called @samp{firewall.example.com}. Set
command-line options as follows:

@example
xboard -ics -icshost firewall.example.com -icsport 23
@end example
@noindent
Then when you run XBoard in ICS mode, you will be prompted
to log in to the firewall host. This works because port 23 is the
standard telnet login service. Do so, then telnet to ICS, using a
command like @samp{telnet chessclub.com 5000}, or whatever command
the firewall provides for telnetting to port 5000.

If your firewall lets you telnet (or rlogin) to remote hosts but
doesn't let you telnet to port 5000, you may be able to connect to the
chess server on port 23 instead, which is the port the telnet program
uses by default.  Some chess servers support this (including
chessclub.com and freechess.org), while some do not.

If your chess server does not allow connections on port 23 and your
firewall does not allow you to connect to other ports, you may be able
to connect by hopping through another host outside the firewall that
you have an account on.  For instance, suppose you have a shell
account at @samp{foo.edu}. Follow the recipe above, but instead of
typing @samp{telnet chessclub.com 5000} to the firewall, type
@samp{telnet foo.edu} (or @samp{rlogin foo.edu}), log in there, and
then type @samp{telnet chessclub.com 5000}.

Suppose that you can't telnet directly to ICS, but you can use rsh
to run programs on a firewall host, and that host can telnet to ICS.
Let's say the firewall is called @samp{rsh.example.com}. Set
command-line options as follows:

@example
xboard -ics -gateway rsh.example.com -icshost chessclub.com
@end example

@noindent
Then when you run XBoard in ICS mode, it will connect to
the ICS by using @file{rsh} to run the command
@samp{telnet chessclub.com 5000} on host @samp{rsh.example.com}.

Suppose that you can telnet anywhere you want, but you have to
run a special program called @file{ptelnet} to do so.

First, we'll consider the easy case, in which
@samp{ptelnet chessclub.com 5000} gets you to the chess server.
In this case set command line options as follows:

@example
xboard -ics -telnet -telnetProgram ptelnet
@end example

@noindent
Then when you run XBoard in ICS mode, it will issue the
command @samp{ptelnet chessclub.com 5000} to connect to the ICS.

Next, suppose that @samp{ptelnet chessclub.com 5000} doesn't work;
that is, your @file{ptelnet} program doesn't let you connect to
alternative ports. As noted above, your chess server may allow you to
connect on port 23 instead.  In that case, just add the option
@samp{-icsport ""} to the above command.
But if your chess server doesn't let you connect on port 23, you will have
to find some other host outside the firewall and hop through it. For
instance, suppose you have a shell account at @samp{foo.edu}. Set
command line options as follows:

@example
xboard -ics -telnet -telnetProgram ptelnet -icshost foo.edu -icsport ""
@end example

@noindent
Then when you run XBoard in ICS mode, it will issue the
command @samp{ptelnet foo.edu} to connect to your account at
@samp{foo.edu}. Log in there, then type @samp{telnet chessclub.com 5000}.

ICC timestamp and FICS timeseal do not work through some
firewalls.  You can use them only if your firewall gives a clean TCP
connection with a full 8-bit wide path.  If your firewall allows you
to get out only by running a special telnet program, you can't use
timestamp or timeseal across it.  But if you have access to a
computer just outside your firewall, and you have much lower netlag
when talking to that computer than to the ICS, it might be worthwhile
running timestamp there.  Follow the instructions above for hopping
through a host outside the firewall (foo.edu in the example),
but run timestamp or timeseal on that host instead of telnet.

Suppose that you have a SOCKS firewall that will give you a clean
8-bit wide TCP connection to the chess server, but only after you
authenticate yourself via the SOCKS protocol.  In that case, you could
make a socksified version of XBoard and run that.  If you are using
timestamp or timeseal, you will to socksify it, not XBoard; this may
be difficult seeing that ICC and FICS do not provide source code for
these programs.  Socksification is beyond the scope of this document,
but see the SOCKS Web site at http://www.socks.permeo.com/.
If you are missing SOCKS, try http://www.funbureau.com/.

@node Environment
@chapter Environment variables
@cindex Environment variables
@cindex CHESSDIR
Game and position files are found in a directory named by the
@code{CHESSDIR} environment variable. If this variable is not set, the
current working directory is used. If @code{CHESSDIR} is set,
XBoard actually changes its working directory to
@code{$CHESSDIR}, so any files written by the chess engine
will be placed there too.

@node Limitations
@chapter Limitations and known bugs
@cindex Limitations
@cindex Bugs
There is no way for two people running copies of XBoard to play
each other without going through an Internet Chess Server.

Under some circumstances, your ICS password may be echoed when you log on.

If you are connecting to the ICS by running telnet on an Internet
provider or firewall host, you may find that each line you type is
echoed back an extra time after you hit @key{Enter}. If your Internet
provider is a Unix system, you can probably turn its echo off by
typing @kbd{stty -echo} after you log in, and/or typing
@key{^E}@key{Enter} (Ctrl+E followed by the Enter key) to the telnet
program after you have logged into ICS.  It is a good idea to do this
if you can, because the extra echo can occasionally confuse XBoard's
parsing routines.

The game parser recognizes only algebraic notation.

Many of the following points used to be limitations in XBoard 4.2.7 and earlier, 
but are now fixed:
The internal move legality tester in XBoard 4.3.xx does look at the game history, 
and is fully aware of castling or en-passant-capture rights. It permits castling with 
the king on the d file because this is possible in some "wild 1" games on ICS. 
The piece-drop menu does not check piece drops in bughouse to see if you actually hold 
the piece you are trying to drop. But this way of dropping pieces should be considered 
an obsolete feature, now that pieces can be dropped by dragging them from the holdings 
to the board. Anyway, if you would attempt an illegal move when using a chess engine or the ICS, 
XBoard will accept the error message that comes back, undo the move, and let you try another.
FEN positions saved by XBoard do include correct information about whether castling or 
en passant are legal, and also handle the 50-move counter.
The mate detector does not understand that non-contact mate is not really mate in bughouse. 
The only problem this causes while playing is minor: a "#" (mate indicator) character will 
show up after a non-contact mating move in the move list. XBoard will not assume the game 
is over at that point, not even when the option Detect Mates is on.
Edit Game mode always uses the rules of the selected variant, 
which can be a variant that uses piece drops.  
You can load and edit games that contain piece drops. 
The (obsolete) piece menus are not active, 
but you can perform piece drops by dragging pieces from the holdings.
Fischer Random castling is fully understood. 
You can enter castlings by dragging the King on top of your Rook. 
You can probably also play Fischer Random successfully on ICS by typing 
castling moves into the ICS Interaction window.

The menus may not work if your keyboard is in Caps Lock or Num Lock mode.
This seems to be a problem with the Athena menu widget,
not an XBoard bug.

Also see the ToDo file included with the distribution for many other
possible bugs, limitations, and ideas for improvement that have been
suggested.
@node Problems
@chapter Reporting problems
@cindex Bugs
@cindex Bug reports
@cindex Reporting bugs
@cindex Problems
@cindex Reporting problems

You can report bugs and problems with XBoard using
the bug tracker at @code{https://savannah.gnu.org/projects/xboard/}
or by sending mail to @code{<bug-xboard@@gnu.org>}.  It can also
be useful to report or discuss bugs in the WinBoard Forum at
@code{http://www.open-aurec.com/wbforum/}, 
WinBoard development section.

Please use the @file{script} program to start a typescript, run 
XBoard with the @samp{-debug} option, and include the typescript
output in your message.
Also tell us what kind of machine and what operating system version
you are using.  The command @samp{uname -a} will often tell you this.

If you improve XBoard, please send a message about your changes,
and we will get in touch with you about merging them in
to the main line of development.

@node Contributors
@chapter Authors and contributors
@cindex Authors
@cindex Contributors

Chris Sears and Dan Sears wrote the original XBoard.  They were
responsible for versions 1.0 through 1.2.  The color scheme was taken
from Wayne Christopher's @code{XChess} program.

Tim Mann was primarily responsible for XBoard versions 1.3 through
4.2.7, and for WinBoard (a port of XBoard to Microsoft Win32) from its
inception through version 4.2.7.

John Chanak contributed the initial implementation of ICS mode.  Evan
Welsh wrote @code{CMail}, and Patrick Surry helped in designing,
testing, and documenting it.  Elmar Bartel contributed the new piece
bitmaps introduced in version 3.2.  Jochen Wiedmann converted the
documentation to texinfo.  Frank McIngvale added click/click moving,
the Analysis modes, piece flashing, ZIICS import, and ICS text
colorization to XBoard.  Hugh Fisher added animated piece movement to
XBoard, and Henrik Gram added it to WinBoard.  Mark Williams
contributed the initial (WinBoard-only) implementation of many new
features added to both XBoard and WinBoard in version 4.1.0, including
copy/paste, premove, icsAlarm, autoFlipView, training mode, auto
raise, and blindfold.  Ben Nye contributed X copy/paste code for
XBoard.

In a fork from version 4.2.7, Alessandro Scotti added many elements to
the user interface of WinBoard, including the board textures and
font-based rendering, the evaluation-graph, move-history and
engine-output window.  He was also responsible for adding the UCI
support.

H. G. Muller continued this fork of the project, producing version
4.3.  He made WinBoard castling- and e.p.-aware, added variant support
with adjustable board sizes, the crazyhouse holdings, and the fairy
pieces.  In addition he added most of the adjudication options, made
WinBoard more robust in dealing with buggy and crashing engines, and
extended time control with a time-odds and node-count-based modes.
Most of the options that initially were WinBoard only have now been
back-ported to XBoard.

Michel van den Bergh provided the code for reading Polyglot opening books.

Meanwhile, some work continued on the GNU XBoard project maintained at
savannah.gnu.org, but version 4.2.8 was never released.  Daniel
Mehrmann was responsible for much of this work.

Most recently, Arun Persaud worked with H. G. Muller to merge all
the features of the never-released XBoard/WinBoard 4.2.8 of the GNU
XBoard project and the never-released 4.3.16 from H. G.'s fork into a
unified XBoard/WinBoard 4.4, which is now available both from the
savannah.gnu.org web site and the WinBoard forum.

@node CMail
@chapter CMail
@cindex cmail
The @file{cmail} program can help you play chess by email with opponents of
your choice using XBoard as an interface.

You will usually run @file{cmail} without giving any options.

@menu
* CMail options::    Invoking CMail.
* CMail game::       Starting a CMail game.
* CMail answer::     Answering a move.
* CMail multi::      Multiple games in one message.
* CMail completion:: Completing a game.
* CMail trouble::    Known CMail problems.
@end menu

@node CMail options
@section CMail options
@table @asis
@item -h
Displays @file{cmail} usage information.
@item -c
Shows the conditions of the GNU General Public License.
@xref{Copying}.
@item -w
Shows the warranty notice of the GNU General Public License.
@xref{Copying}.
@item -v
@itemx -xv
Provides or inhibits verbose output from @file{cmail} and XBoard,
useful for debugging. The
@code{-xv}
form also inhibits the cmail introduction message.
@item -mail
@itemx -xmail
Invokes or inhibits the sending of a mail message containing the move.
@item -xboard
@itemx -xxboard
Invokes or inhibits the running of XBoard on the game file.
@item -reuse
@itemx -xreuse
Invokes or inhibits the reuse of an existing XBoard to display the
current game.
@item -remail
Resends the last mail message for that game. This inhibits running
XBoard.
@item -game <name>
The name of the game to be processed.
@item -wgames <number>
@itemx -bgames <number>
@itemx -games <number>
Number of games to start as White, as Black or in total. Default is 1 as
white and none as black. If only one color is specified then none of the
other color is assumed. If no color is specified then equal numbers of
White and Black games are started, with the extra game being as White if an
odd number of total games is specified.
@item -me <short name>
@itemx -opp <short name>
A one-word alias for yourself or your opponent.
@item -wname <full name>
@itemx -bname <full name>
@itemx -myname <full name>
@itemx -oppname <full name>
The full name of White, Black, yourself or your opponent.
@item -wna <net address>
@itemx -bna <net address>
@itemx -na <net address>
@itemx -oppna <net address>
The email address of White, Black, yourself or your opponent.
@item -dir <directory>
The directory in which @file{cmail} keeps its files. This defaults to the
environment variable @code{$CMAIL_DIR} or failing that, @code{$CHESSDIR},
@file{$HOME/Chess} or @file{~/Chess}. It will be created if it does not exist.
@item -arcdir <directory>
The directory in which @file{cmail} archives completed games. Defaults to
the environment variable @code{$CMAIL_ARCDIR} or, in its absence, the same
directory as cmail keeps its working files (above).
@item -mailprog <mail program>
The program used by cmail to send email messages. This defaults to the
environment variable @code{$CMAIL_MAILPROG} or failing that
@file{/usr/ucb/Mail}, @file{/usr/ucb/mail} or @file{Mail}. You will need
to set this variable if none of the above paths fit your system.
@item -logFile <file>
A file in which to dump verbose debugging messages that are invoked with
the @samp{-v}
option.
@item -event <event>
The PGN Event tag (default @samp{Email correspondence game}).
@item -site <site>
The PGN Site tag (default @samp{NET}).
@item -round <round>
The PGN Round tag (default @samp{-}, not applicable).
@item -mode <mode>
The PGN Mode tag (default @samp{EM}, Electronic Mail).
@item Other options
Any option flags not listed above are passed through to XBoard.
Invoking XBoard through CMail changes the default values of two XBoard
options: The default value for @samp{-noChessProgram} is changed to
true; that is, by default no chess engine is started.  The default
value for @samp{-timeDelay} is changed to 0; that is, by default
XBoard immediately goes to the end of the game as played so far,
rather than stepping through the moves one by one.  You can still set
these options to whatever values you prefer by supplying them on
CMail's command line.  @xref{Options}.
@end table

@node CMail game
@section Starting a CMail Game
Type @file{cmail} from a shell to start a game as white. After an opening
message, you will be prompted for a game name, which is optional---if you
simply press @key{Enter}, the game name will take the form
@samp{you-VS-opponent}. You will next be prompted for the short name
of your opponent. If you haven't played this person before, you will also
be prompted for his/her email address. @file{cmail} will then invoke
XBoard in the background. Make your first move and select
@samp{Mail Move} from the @samp{File} menu. @xref{File Menu}. If all is well,
@file{cmail} will mail a copy of the move to your opponent. If you select
@samp{Exit} without having selected @samp{Mail Move} then no move will be
made.

@node CMail answer
@section Answering a Move
When you receive a message from an opponent containing a move in one of
your games, simply pipe the message through @file{cmail}. In some mailers
this is as simple as typing @kbd{| cmail} when viewing the message, while in
others you may have to save the message to a file and do @kbd{cmail < file}
at the command line. In either case @file{cmail} will display the game using
XBoard. If you didn't exit XBoard when you made your first move
then @file{cmail} will do its best to use the existing XBoard instead
of starting a new one. As before, simply make a move and select
@samp{Mail Move} from the @samp{File} menu. @xref{File Menu}. @file{cmail}
will try to use the
XBoard that was most recently used to display the current game. This
means that many games can be in progress simultaneously, each with its own
active XBoard.

If you want to look at the history or explore a variation, go ahead, but
you must return to the current position before XBoard will allow you
to mail a move. If you edit the game's history you must select
@samp{Reload Same Game} from the @samp{File} menu to get back to the original
position, then make the move you want and select @samp{Mail Move}.
As before, if you decide you aren't ready to make a move just yet you can
either select @samp{Exit} without sending a move or just leave
XBoard running until you are ready.

@node CMail multi
@section Multi-Game Messages

It is possible to have a @file{cmail} message carry more than one game.
This feature was implemented to handle IECG (International Email Chess
Group) matches, where a match consists of one game as white and one as black,
with moves transmitted simultaneously. In case there are more general uses,
@file{cmail} itself places no limit on the number of black/white games
contained in a message; however, XBoard does.

@node CMail completion
@section Completing a Game
Because XBoard can detect checkmate and stalemate, @file{cmail}
handles game termination sensibly. As well as resignation, the
@samp{Action} menu allows draws to be offered and accepted for
@file{cmail} games.

For multi-game messages, only unfinished and just-finished games will be
included in email messages. When all the games are finished, they are
archived in the user's archive directory, and similarly in the opponent's
when he or she pipes the final message through @file{cmail}. The archive
file name includes the date the game was started.

@node CMail trouble
@section Known CMail Problems
It's possible that a strange conjunction of conditions may occasionally
mean that @file{cmail} has trouble reactivating an existing
XBoard. If this should happen, simply trying it again should work.
If not, remove the file that stores the XBoard's PID
(@file{game.pid}) or use the @samp{-xreuse} option to force
@file{cmail} to start a new XBoard.

Versions of @file{cmail} after 2.16 no longer understand the old file format
that XBoard used to use and so cannot be used to correspond with
anyone using an older version.

Versions of @file{cmail} older than 2.11 do not handle multi-game messages,
so multi-game correspondence is not possible with opponents using an older
version.

@node Other programs
@chapter Other programs you can use with XBoard
@cindex Other programs

Here are some other programs you can use with XBoard

@menu
* GNU Chess::        The GNU Chess engine.
* Fairy-Max::        The Fairy-Max chess engine.
* HoiChess::         The HoiChess chess engine.
* Crafty::           The Crafty chess engine.
@end menu

@node GNU Chess
@section GNU Chess

The GNU Chess engine is available from:

ftp://ftp.gnu.org/gnu/gnuchess/

You can use XBoard to play a game against GNU Chess, or to
interface GNU Chess to an ICS.

@node Fairy-Max
@section Fairy-Max

Fairy-Max is a derivative from the once World's smallest Chess program micro-Max,
which measures only about 100 lines of source code.
The main difference with micro-Max is that Fairy-Max loads its move-generator
tables from a file, so that the rules for piece movement can be easily configured
to implement unorthodox pieces.
Fairy-Max can therefore play a large number of variants, normal Chess being one of those.
In addition it plays Knightmate, Capablanca and Gothic Chess, Shatranj, Courier Chess,
Cylinder chess, Berolina Chess, while the user can easily define new variants.
It can be obtained from:

http://home.hccnet.nl/h.g.muller/dwnldpage.html

@node HoiChess
@section HoiChess

HoiChess is a not-so-very-strong Chess engine, which comes with a derivative HoiXiangqi,
able to play Chinese Chess. It can be obtained from the standard Linux repositories
through:

sudo apt-get install hoichess

@node Crafty
@section Crafty

Crafty is a chess engine written by Bob Hyatt.
You can use XBoard to play a game against Crafty, hook Crafty up
to an ICS, or use Crafty to interactively analyze games and positions
for you.

Crafty is a strong, rapidly evolving chess program. This rapid
pace of development is good, because it means Crafty is always
getting better.  This can sometimes cause problems with
backwards compatibility, but usually the latest version of Crafty
will work well with the latest version of XBoard.
Crafty can be obtained from its author's FTP site:
ftp://ftp.cis.uab.edu/hyatt/.

To use Crafty with XBoard, give the -fcp and -fd options as follows, where
<crafty's directory> is the directory in which you installed Crafty
and placed its book and other support files.

@ifnottex
@node Copyright
@unnumbered Copyright
@include copyright.texi
@end ifnottex

@node Copying
@unnumbered GNU GENERAL PUBLIC LICENSE
@include gpl.texinfo

@c noman
@node Index
@unnumbered Index

@printindex cp
@contents
@c end noman

@bye