From 65af6e8e751bc3c290f21193664ae41b38709ee7 Mon Sep 17 00:00:00 2001 From: Arun Persaud Date: Sat, 20 Sep 2014 10:06:17 -0700 Subject: [PATCH] update gettext configuration to not include any generated files in git before we had a somewhat mixed setup, which seems to create problems when a different gettext version was installed on the users machine compared to the version used to generate the files in git. This should solve the problem. The user will now have to generate these files using autopoint, which we call from autogen.sh. --- .gitignore | 20 + ABOUT-NLS | 1282 ------------------------------------------------ autogen.sh | 3 +- config.rpath | 672 ------------------------- m4/gettext.m4 | 383 --------------- m4/iconv.m4 | 214 -------- m4/lib-ld.m4 | 110 ---- m4/lib-link.m4 | 774 ----------------------------- m4/lib-prefix.m4 | 224 --------- m4/nls.m4 | 32 -- m4/po.m4 | 449 ----------------- m4/progtest.m4 | 92 ---- po/Makefile.in.in | 446 ----------------- po/Makevars.template | 41 -- po/Rules-quot | 47 -- po/boldquot.sed | 10 - po/en@boldquot.header | 25 - po/en@quot.header | 22 - po/insert-header.sin | 23 - po/quot.sed | 6 - po/remove-potcdate.sin | 19 - 21 files changed, 22 insertions(+), 4872 deletions(-) delete mode 100644 ABOUT-NLS delete mode 100755 config.rpath delete mode 100644 m4/gettext.m4 delete mode 100644 m4/iconv.m4 delete mode 100644 m4/lib-ld.m4 delete mode 100644 m4/lib-link.m4 delete mode 100644 m4/lib-prefix.m4 delete mode 100644 m4/nls.m4 delete mode 100644 m4/po.m4 delete mode 100644 m4/progtest.m4 delete mode 100644 po/Makefile.in.in delete mode 100644 po/Makevars.template delete mode 100644 po/Rules-quot delete mode 100644 po/boldquot.sed delete mode 100644 po/en@boldquot.header delete mode 100644 po/en@quot.header delete mode 100644 po/insert-header.sin delete mode 100644 po/quot.sed delete mode 100644 po/remove-potcdate.sin diff --git a/.gitignore b/.gitignore index 9d23ea4..c9e73f0 100644 --- a/.gitignore +++ b/.gitignore @@ -53,3 +53,23 @@ xboard.toc xboard.tp xboard.vr +# gettextize -f files +ABOUT-NLS +config.rpath +m4/gettext.m4 +m4/iconv.m4 +m4/lib-ld.m4 +m4/lib-link.m4 +m4/lib-prefix.m4 +m4/nls.m4 +m4/po.m4 +m4/progtest.m4 +po/Makefile.in.in +po/Makevars.template +po/Rules-quot +po/boldquot.sed +po/en@boldquot.header +po/en@quot.header +po/insert-header.sin +po/quot.sed +po/remove-potcdate.sin diff --git a/ABOUT-NLS b/ABOUT-NLS deleted file mode 100644 index b1de1b6..0000000 --- a/ABOUT-NLS +++ /dev/null @@ -1,1282 +0,0 @@ -1 Notes on the Free Translation Project -*************************************** - -Free software is going international! The Free Translation Project is -a way to get maintainers of free software, translators, and users all -together, so that free software will gradually become able to speak many -languages. A few packages already provide translations for their -messages. - - If you found this `ABOUT-NLS' file inside a distribution, you may -assume that the distributed package does use GNU `gettext' internally, -itself available at your nearest GNU archive site. But you do _not_ -need to install GNU `gettext' prior to configuring, installing or using -this package with messages translated. - - Installers will find here some useful hints. These notes also -explain how users should proceed for getting the programs to use the -available translations. They tell how people wanting to contribute and -work on translations can contact the appropriate team. - -1.1 INSTALL Matters -=================== - -Some packages are "localizable" when properly installed; the programs -they contain can be made to speak your own native language. Most such -packages use GNU `gettext'. Other packages have their own ways to -internationalization, predating GNU `gettext'. - - By default, this package will be installed to allow translation of -messages. It will automatically detect whether the system already -provides the GNU `gettext' functions. Installers may use special -options at configuration time for changing the default behaviour. The -command: - - ./configure --disable-nls - -will _totally_ disable translation of messages. - - When you already have GNU `gettext' installed on your system and run -configure without an option for your new package, `configure' will -probably detect the previously built and installed `libintl' library -and will decide to use it. If not, you may have to to use the -`--with-libintl-prefix' option to tell `configure' where to look for it. - - Internationalized packages usually have many `po/LL.po' files, where -LL gives an ISO 639 two-letter code identifying the language. Unless -translations have been forbidden at `configure' time by using the -`--disable-nls' switch, all available translations are installed -together with the package. However, the environment variable `LINGUAS' -may be set, prior to configuration, to limit the installed set. -`LINGUAS' should then contain a space separated list of two-letter -codes, stating which languages are allowed. - -1.2 Using This Package -====================== - -As a user, if your language has been installed for this package, you -only have to set the `LANG' environment variable to the appropriate -`LL_CC' combination. If you happen to have the `LC_ALL' or some other -`LC_xxx' environment variables set, you should unset them before -setting `LANG', otherwise the setting of `LANG' will not have the -desired effect. Here `LL' is an ISO 639 two-letter language code, and -`CC' is an ISO 3166 two-letter country code. For example, let's -suppose that you speak German and live in Germany. At the shell -prompt, merely execute `setenv LANG de_DE' (in `csh'), -`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). -This can be done from your `.login' or `.profile' file, once and for -all. - - You might think that the country code specification is redundant. -But in fact, some languages have dialects in different countries. For -example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The -country code serves to distinguish the dialects. - - The locale naming convention of `LL_CC', with `LL' denoting the -language and `CC' denoting the country, is the one use on systems based -on GNU libc. On other systems, some variations of this scheme are -used, such as `LL' or `LL_CC.ENCODING'. You can get the list of -locales supported by your system for your language by running the -command `locale -a | grep '^LL''. - - Not all programs have translations for all languages. By default, an -English message is shown in place of a nonexistent translation. If you -understand other languages, you can set up a priority list of languages. -This is done through a different environment variable, called -`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' -for the purpose of message handling, but you still need to have `LANG' -set to the primary language; this is required by other parts of the -system libraries. For example, some Swedish users who would rather -read translations in German than English for when Swedish is not -available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. - - Special advice for Norwegian users: The language code for Norwegian -bokma*l changed from `no' to `nb' recently (in 2003). During the -transition period, while some message catalogs for this language are -installed under `nb' and some older ones under `no', it's recommended -for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and -older translations are used. - - In the `LANGUAGE' environment variable, but not in the `LANG' -environment variable, `LL_CC' combinations can be abbreviated as `LL' -to denote the language's main dialect. For example, `de' is equivalent -to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' -(Portuguese as spoken in Portugal) in this context. - -1.3 Translating Teams -===================== - -For the Free Translation Project to be a success, we need interested -people who like their own language and write it well, and who are also -able to synergize with other translators speaking the same language. -Each translation team has its own mailing list. The up-to-date list of -teams can be found at the Free Translation Project's homepage, -`http://translationproject.org/', in the "Teams" area. - - If you'd like to volunteer to _work_ at translating messages, you -should become a member of the translating team for your own language. -The subscribing address is _not_ the same as the list itself, it has -`-request' appended. For example, speakers of Swedish can send a -message to `sv-request@li.org', having this message body: - - subscribe - - Keep in mind that team members are expected to participate -_actively_ in translations, or at solving translational difficulties, -rather than merely lurking around. If your team does not exist yet and -you want to start one, or if you are unsure about what to do or how to -get started, please write to `coordinator@translationproject.org' to -reach the coordinator for all translator teams. - - The English team is special. It works at improving and uniformizing -the terminology in use. Proven linguistic skills are praised more than -programming skills, here. - -1.4 Available Packages -====================== - -Languages are not equally supported in all packages. The following -matrix shows the current state of internationalization, as of June -2010. The matrix shows, in regard of each package, for which languages -PO files have been submitted to translation coordination, with a -translation percentage of at least 50%. - - Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca - +--------------------------------------------------+ - a2ps | [] [] | - aegis | | - ant-phone | | - anubis | | - aspell | [] [] | - bash | | - bfd | | - bibshelf | [] | - binutils | | - bison | | - bison-runtime | [] | - bluez-pin | [] [] | - bombono-dvd | | - buzztard | | - cflow | | - clisp | | - coreutils | [] [] | - cpio | | - cppi | | - cpplib | [] | - cryptsetup | | - dfarc | | - dialog | [] [] | - dico | | - diffutils | [] | - dink | | - doodle | | - e2fsprogs | [] | - enscript | [] | - exif | | - fetchmail | [] | - findutils | [] | - flex | [] | - freedink | | - gas | | - gawk | [] [] | - gcal | [] | - gcc | | - gettext-examples | [] [] [] [] | - gettext-runtime | [] [] | - gettext-tools | [] [] | - gip | [] | - gjay | | - gliv | [] | - glunarclock | [] [] | - gnubiff | | - gnucash | [] | - gnuedu | | - gnulib | | - gnunet | | - gnunet-gtk | | - gnutls | | - gold | | - gpe-aerial | | - gpe-beam | | - gpe-bluetooth | | - gpe-calendar | | - gpe-clock | [] | - gpe-conf | | - gpe-contacts | | - gpe-edit | | - gpe-filemanager | | - gpe-go | | - gpe-login | | - gpe-ownerinfo | [] | - gpe-package | | - gpe-sketchbook | | - gpe-su | [] | - gpe-taskmanager | [] | - gpe-timesheet | [] | - gpe-today | [] | - gpe-todo | | - gphoto2 | | - gprof | [] | - gpsdrive | | - gramadoir | | - grep | | - grub | [] [] | - gsasl | | - gss | | - gst-plugins-bad | [] | - gst-plugins-base | [] | - gst-plugins-good | [] | - gst-plugins-ugly | [] | - gstreamer | [] [] [] | - gtick | | - gtkam | [] | - gtkorphan | [] | - gtkspell | [] [] [] | - gutenprint | | - hello | [] | - help2man | | - hylafax | | - idutils | | - indent | [] [] | - iso_15924 | | - iso_3166 | [] [] [] [] [] [] [] | - iso_3166_2 | | - iso_4217 | | - iso_639 | [] [] [] [] | - iso_639_3 | | - jwhois | | - kbd | | - keytouch | [] | - keytouch-editor | | - keytouch-keyboa... | [] | - klavaro | [] | - latrine | | - ld | [] | - leafpad | [] [] | - libc | [] [] | - libexif | () | - libextractor | | - libgnutls | | - libgpewidget | | - libgpg-error | | - libgphoto2 | | - libgphoto2_port | | - libgsasl | | - libiconv | [] | - libidn | | - lifelines | | - liferea | [] [] | - lilypond | | - linkdr | [] | - lordsawar | | - lprng | | - lynx | [] | - m4 | | - mailfromd | | - mailutils | | - make | | - man-db | | - man-db-manpages | | - minicom | | - mkisofs | | - myserver | | - nano | [] [] | - opcodes | | - parted | | - pies | | - popt | | - psmisc | | - pspp | [] | - pwdutils | | - radius | [] | - recode | [] [] | - rosegarden | | - rpm | | - rush | | - sarg | | - screem | | - scrollkeeper | [] [] [] | - sed | [] [] | - sharutils | [] [] | - shishi | | - skencil | | - solfege | | - solfege-manual | | - soundtracker | | - sp | | - sysstat | | - tar | [] | - texinfo | | - tin | | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | [] | - vice | | - vmm | | - vorbis-tools | | - wastesedge | | - wdiff | | - wget | [] [] | - wyslij-po | | - xchat | [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] | - +--------------------------------------------------+ - af am an ar as ast az be be@latin bg bn_IN bs ca - 6 0 1 2 3 19 1 10 3 28 3 1 38 - - crh cs da de el en en_GB en_ZA eo es et eu fa - +-------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] | - aegis | [] [] [] | - ant-phone | [] () | - anubis | [] [] | - aspell | [] [] [] [] [] | - bash | [] [] [] | - bfd | [] | - bibshelf | [] [] [] | - binutils | [] | - bison | [] [] | - bison-runtime | [] [] [] [] | - bluez-pin | [] [] [] [] [] [] | - bombono-dvd | [] | - buzztard | [] [] [] | - cflow | [] [] | - clisp | [] [] [] [] | - coreutils | [] [] [] [] | - cpio | | - cppi | | - cpplib | [] [] [] | - cryptsetup | [] | - dfarc | [] [] [] | - dialog | [] [] [] [] [] | - dico | | - diffutils | [] [] [] [] [] [] | - dink | [] [] [] | - doodle | [] | - e2fsprogs | [] [] [] | - enscript | [] [] [] | - exif | () [] [] | - fetchmail | [] [] () [] [] [] | - findutils | [] [] [] | - flex | [] [] | - freedink | [] [] [] | - gas | [] | - gawk | [] [] [] | - gcal | [] | - gcc | [] [] | - gettext-examples | [] [] [] [] | - gettext-runtime | [] [] [] [] | - gettext-tools | [] [] [] | - gip | [] [] [] [] | - gjay | [] | - gliv | [] [] [] | - glunarclock | [] [] | - gnubiff | () | - gnucash | [] () () () () | - gnuedu | [] [] | - gnulib | [] [] | - gnunet | | - gnunet-gtk | [] | - gnutls | [] [] | - gold | [] | - gpe-aerial | [] [] [] [] | - gpe-beam | [] [] [] [] | - gpe-bluetooth | [] [] | - gpe-calendar | [] | - gpe-clock | [] [] [] [] | - gpe-conf | [] [] [] | - gpe-contacts | [] [] [] | - gpe-edit | [] [] | - gpe-filemanager | [] [] [] | - gpe-go | [] [] [] [] | - gpe-login | [] [] | - gpe-ownerinfo | [] [] [] [] | - gpe-package | [] [] [] | - gpe-sketchbook | [] [] [] [] | - gpe-su | [] [] [] [] | - gpe-taskmanager | [] [] [] [] | - gpe-timesheet | [] [] [] [] | - gpe-today | [] [] [] [] | - gpe-todo | [] [] [] | - gphoto2 | [] [] () [] [] [] | - gprof | [] [] [] | - gpsdrive | [] [] [] | - gramadoir | [] [] [] | - grep | [] | - grub | [] [] | - gsasl | [] | - gss | | - gst-plugins-bad | [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] () [] | - gtkam | [] [] () [] [] | - gtkorphan | [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] | - gutenprint | [] [] [] | - hello | [] [] [] [] | - help2man | [] | - hylafax | [] [] | - idutils | [] [] | - indent | [] [] [] [] [] [] [] | - iso_15924 | [] () [] [] | - iso_3166 | [] [] [] [] () [] [] [] () | - iso_3166_2 | () | - iso_4217 | [] [] [] () [] [] | - iso_639 | [] [] [] [] () [] [] | - iso_639_3 | [] | - jwhois | [] | - kbd | [] [] [] [] [] | - keytouch | [] [] | - keytouch-editor | [] [] | - keytouch-keyboa... | [] | - klavaro | [] [] [] [] | - latrine | [] () | - ld | [] [] | - leafpad | [] [] [] [] [] [] | - libc | [] [] [] [] | - libexif | [] [] () | - libextractor | | - libgnutls | [] | - libgpewidget | [] [] | - libgpg-error | [] [] | - libgphoto2 | [] () | - libgphoto2_port | [] () [] | - libgsasl | | - libiconv | [] [] [] [] [] | - libidn | [] [] [] | - lifelines | [] () | - liferea | [] [] [] [] [] | - lilypond | [] [] [] | - linkdr | [] [] [] | - lordsawar | [] | - lprng | | - lynx | [] [] [] [] | - m4 | [] [] [] [] | - mailfromd | | - mailutils | [] | - make | [] [] [] | - man-db | | - man-db-manpages | | - minicom | [] [] [] [] | - mkisofs | | - myserver | | - nano | [] [] [] | - opcodes | [] [] | - parted | [] [] | - pies | | - popt | [] [] [] [] [] | - psmisc | [] [] [] | - pspp | [] | - pwdutils | [] | - radius | [] | - recode | [] [] [] [] [] [] | - rosegarden | () () () | - rpm | [] [] [] | - rush | | - sarg | | - screem | | - scrollkeeper | [] [] [] [] [] | - sed | [] [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | | - skencil | [] () [] | - solfege | [] [] [] | - solfege-manual | [] [] | - soundtracker | [] [] [] | - sp | [] | - sysstat | [] [] [] | - tar | [] [] [] [] | - texinfo | [] [] [] | - tin | [] [] | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | [] [] [] [] | - vice | () () | - vmm | [] | - vorbis-tools | [] [] | - wastesedge | [] | - wdiff | [] [] | - wget | [] [] [] | - wyslij-po | | - xchat | [] [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] [] | - +-------------------------------------------------+ - crh cs da de el en en_GB en_ZA eo es et eu fa - 5 64 105 117 18 1 8 0 28 89 18 19 0 - - fi fr ga gl gu he hi hr hu hy id is it ja ka kn - +----------------------------------------------------+ - a2ps | [] [] [] [] | - aegis | [] [] | - ant-phone | [] [] | - anubis | [] [] [] [] | - aspell | [] [] [] [] | - bash | [] [] [] [] | - bfd | [] [] [] | - bibshelf | [] [] [] [] [] | - binutils | [] [] [] | - bison | [] [] [] [] | - bison-runtime | [] [] [] [] [] [] | - bluez-pin | [] [] [] [] [] [] [] [] | - bombono-dvd | [] | - buzztard | [] | - cflow | [] [] [] | - clisp | [] | - coreutils | [] [] [] [] [] | - cpio | [] [] [] [] | - cppi | [] [] | - cpplib | [] [] [] | - cryptsetup | [] [] [] | - dfarc | [] [] [] | - dialog | [] [] [] [] [] [] [] | - dico | | - diffutils | [] [] [] [] [] [] [] [] [] | - dink | [] | - doodle | [] [] | - e2fsprogs | [] [] | - enscript | [] [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] [] [] [] | - findutils | [] [] [] [] [] [] | - flex | [] [] [] | - freedink | [] [] [] | - gas | [] [] | - gawk | [] [] [] [] () [] | - gcal | [] | - gcc | [] | - gettext-examples | [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] | - gettext-tools | [] [] [] [] | - gip | [] [] [] [] [] [] | - gjay | [] | - gliv | [] () | - glunarclock | [] [] [] [] | - gnubiff | () [] () | - gnucash | () () () () () [] | - gnuedu | [] [] | - gnulib | [] [] [] [] [] [] | - gnunet | | - gnunet-gtk | [] | - gnutls | [] [] | - gold | [] [] | - gpe-aerial | [] [] [] | - gpe-beam | [] [] [] [] | - gpe-bluetooth | [] [] [] [] | - gpe-calendar | [] [] | - gpe-clock | [] [] [] [] [] | - gpe-conf | [] [] [] [] | - gpe-contacts | [] [] [] [] | - gpe-edit | [] [] [] | - gpe-filemanager | [] [] [] [] | - gpe-go | [] [] [] [] [] | - gpe-login | [] [] [] | - gpe-ownerinfo | [] [] [] [] [] | - gpe-package | [] [] [] | - gpe-sketchbook | [] [] [] [] | - gpe-su | [] [] [] [] [] [] | - gpe-taskmanager | [] [] [] [] [] | - gpe-timesheet | [] [] [] [] [] | - gpe-today | [] [] [] [] [] [] [] | - gpe-todo | [] [] [] | - gphoto2 | [] [] [] [] [] [] | - gprof | [] [] [] [] | - gpsdrive | [] [] [] | - gramadoir | [] [] [] | - grep | [] [] | - grub | [] [] [] [] | - gsasl | [] [] [] [] [] | - gss | [] [] [] [] [] | - gst-plugins-bad | [] [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] [] [] | - gtkam | [] [] [] [] [] | - gtkorphan | [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] [] | - gutenprint | [] [] [] [] | - hello | [] [] [] | - help2man | [] [] | - hylafax | [] | - idutils | [] [] [] [] [] [] | - indent | [] [] [] [] [] [] [] [] | - iso_15924 | [] () [] [] | - iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] | - iso_3166_2 | () [] [] [] | - iso_4217 | [] () [] [] [] [] | - iso_639 | [] () [] [] [] [] [] [] [] | - iso_639_3 | () [] [] | - jwhois | [] [] [] [] [] | - kbd | [] [] | - keytouch | [] [] [] [] [] [] | - keytouch-editor | [] [] [] [] [] | - keytouch-keyboa... | [] [] [] [] [] | - klavaro | [] [] | - latrine | [] [] [] | - ld | [] [] [] [] | - leafpad | [] [] [] [] [] [] [] () | - libc | [] [] [] [] [] | - libexif | [] | - libextractor | | - libgnutls | [] [] | - libgpewidget | [] [] [] [] | - libgpg-error | [] [] | - libgphoto2 | [] [] [] | - libgphoto2_port | [] [] [] | - libgsasl | [] [] [] [] [] | - libiconv | [] [] [] [] [] [] | - libidn | [] [] [] [] | - lifelines | () | - liferea | [] [] [] [] | - lilypond | [] [] | - linkdr | [] [] [] [] [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] [] [] | - m4 | [] [] [] [] [] [] | - mailfromd | | - mailutils | [] [] | - make | [] [] [] [] [] [] [] [] [] | - man-db | [] [] | - man-db-manpages | [] | - minicom | [] [] [] [] [] | - mkisofs | [] [] [] [] | - myserver | | - nano | [] [] [] [] [] [] | - opcodes | [] [] [] [] | - parted | [] [] [] [] | - pies | | - popt | [] [] [] [] [] [] [] [] [] | - psmisc | [] [] [] | - pspp | | - pwdutils | [] [] | - radius | [] [] | - recode | [] [] [] [] [] [] [] [] | - rosegarden | () () () () () | - rpm | [] [] | - rush | | - sarg | [] | - screem | [] [] | - scrollkeeper | [] [] [] [] | - sed | [] [] [] [] [] [] [] [] | - sharutils | [] [] [] [] [] [] [] | - shishi | [] | - skencil | [] | - solfege | [] [] [] [] | - solfege-manual | [] [] | - soundtracker | [] [] | - sp | [] () | - sysstat | [] [] [] [] [] | - tar | [] [] [] [] [] [] [] | - texinfo | [] [] [] [] | - tin | [] | - unicode-han-tra... | | - unicode-transla... | [] [] | - util-linux-ng | [] [] [] [] [] [] | - vice | () () () | - vmm | [] | - vorbis-tools | [] | - wastesedge | () () | - wdiff | [] | - wget | [] [] [] [] [] [] [] [] | - wyslij-po | [] [] [] | - xchat | [] [] [] [] [] [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] | - +----------------------------------------------------+ - fi fr ga gl gu he hi hr hu hy id is it ja ka kn - 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4 - - ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne - +-----------------------------------------------+ - a2ps | [] | - aegis | | - ant-phone | | - anubis | [] [] | - aspell | [] | - bash | | - bfd | | - bibshelf | [] [] | - binutils | | - bison | [] | - bison-runtime | [] [] [] [] [] | - bluez-pin | [] [] [] [] [] | - bombono-dvd | | - buzztard | | - cflow | | - clisp | | - coreutils | [] | - cpio | | - cppi | | - cpplib | | - cryptsetup | | - dfarc | [] | - dialog | [] [] [] [] [] | - dico | | - diffutils | [] [] | - dink | | - doodle | | - e2fsprogs | | - enscript | | - exif | [] | - fetchmail | | - findutils | | - flex | | - freedink | [] | - gas | | - gawk | | - gcal | | - gcc | | - gettext-examples | [] [] [] [] | - gettext-runtime | [] | - gettext-tools | [] | - gip | [] [] | - gjay | | - gliv | | - glunarclock | [] | - gnubiff | | - gnucash | () () () () | - gnuedu | | - gnulib | | - gnunet | | - gnunet-gtk | | - gnutls | [] | - gold | | - gpe-aerial | [] | - gpe-beam | [] | - gpe-bluetooth | [] [] | - gpe-calendar | [] | - gpe-clock | [] [] [] [] [] | - gpe-conf | [] [] | - gpe-contacts | [] [] | - gpe-edit | [] | - gpe-filemanager | [] [] | - gpe-go | [] [] [] | - gpe-login | [] | - gpe-ownerinfo | [] [] | - gpe-package | [] [] | - gpe-sketchbook | [] [] | - gpe-su | [] [] [] [] [] [] | - gpe-taskmanager | [] [] [] [] [] [] | - gpe-timesheet | [] [] | - gpe-today | [] [] [] [] | - gpe-todo | [] [] | - gphoto2 | | - gprof | [] | - gpsdrive | | - gramadoir | | - grep | | - grub | | - gsasl | | - gss | | - gst-plugins-bad | [] [] [] [] | - gst-plugins-base | [] [] | - gst-plugins-good | [] [] | - gst-plugins-ugly | [] [] [] [] [] | - gstreamer | | - gtick | | - gtkam | [] | - gtkorphan | [] [] | - gtkspell | [] [] [] [] [] [] [] | - gutenprint | | - hello | [] [] [] | - help2man | | - hylafax | | - idutils | | - indent | | - iso_15924 | [] [] | - iso_3166 | [] [] () [] [] [] [] [] | - iso_3166_2 | | - iso_4217 | [] [] | - iso_639 | [] [] | - iso_639_3 | [] | - jwhois | [] | - kbd | | - keytouch | [] | - keytouch-editor | [] | - keytouch-keyboa... | [] | - klavaro | [] | - latrine | [] | - ld | | - leafpad | [] [] [] | - libc | [] | - libexif | | - libextractor | | - libgnutls | [] | - libgpewidget | [] [] | - libgpg-error | | - libgphoto2 | | - libgphoto2_port | | - libgsasl | | - libiconv | | - libidn | | - lifelines | | - liferea | | - lilypond | | - linkdr | | - lordsawar | | - lprng | | - lynx | | - m4 | | - mailfromd | | - mailutils | | - make | [] | - man-db | | - man-db-manpages | | - minicom | [] | - mkisofs | | - myserver | | - nano | [] [] | - opcodes | | - parted | | - pies | | - popt | [] [] [] | - psmisc | | - pspp | | - pwdutils | | - radius | | - recode | | - rosegarden | | - rpm | | - rush | | - sarg | | - screem | | - scrollkeeper | [] [] | - sed | | - sharutils | | - shishi | | - skencil | | - solfege | [] | - solfege-manual | | - soundtracker | | - sp | | - sysstat | [] | - tar | [] | - texinfo | [] | - tin | | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | | - vice | | - vmm | | - vorbis-tools | | - wastesedge | | - wdiff | | - wget | [] | - wyslij-po | | - xchat | [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +-----------------------------------------------+ - ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne - 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1 - - nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr - +---------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] [] | - aegis | [] [] [] | - ant-phone | [] [] | - anubis | [] [] [] | - aspell | [] [] [] [] [] | - bash | [] [] | - bfd | [] | - bibshelf | [] [] | - binutils | [] [] | - bison | [] [] [] | - bison-runtime | [] [] [] [] [] [] [] | - bluez-pin | [] [] [] [] [] [] [] [] | - bombono-dvd | [] () | - buzztard | [] [] | - cflow | [] | - clisp | [] [] | - coreutils | [] [] [] [] [] [] | - cpio | [] [] [] | - cppi | [] | - cpplib | [] | - cryptsetup | [] | - dfarc | [] | - dialog | [] [] [] [] | - dico | [] | - diffutils | [] [] [] [] [] [] | - dink | () | - doodle | [] [] | - e2fsprogs | [] [] | - enscript | [] [] [] [] [] | - exif | [] [] [] () [] | - fetchmail | [] [] [] [] | - findutils | [] [] [] [] [] | - flex | [] [] [] [] [] | - freedink | [] [] | - gas | | - gawk | [] [] [] [] | - gcal | | - gcc | [] | - gettext-examples | [] [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] [] | - gip | [] [] [] [] [] | - gjay | | - gliv | [] [] [] [] [] [] | - glunarclock | [] [] [] [] [] | - gnubiff | [] () | - gnucash | [] () () () | - gnuedu | [] | - gnulib | [] [] [] [] | - gnunet | | - gnunet-gtk | | - gnutls | [] [] | - gold | | - gpe-aerial | [] [] [] [] [] [] [] | - gpe-beam | [] [] [] [] [] [] [] | - gpe-bluetooth | [] [] | - gpe-calendar | [] [] [] [] | - gpe-clock | [] [] [] [] [] [] [] [] | - gpe-conf | [] [] [] [] [] [] [] | - gpe-contacts | [] [] [] [] [] | - gpe-edit | [] [] [] | - gpe-filemanager | [] [] [] | - gpe-go | [] [] [] [] [] [] [] [] | - gpe-login | [] [] | - gpe-ownerinfo | [] [] [] [] [] [] [] [] | - gpe-package | [] [] | - gpe-sketchbook | [] [] [] [] [] [] [] | - gpe-su | [] [] [] [] [] [] [] [] | - gpe-taskmanager | [] [] [] [] [] [] [] [] | - gpe-timesheet | [] [] [] [] [] [] [] [] | - gpe-today | [] [] [] [] [] [] [] [] | - gpe-todo | [] [] [] [] [] | - gphoto2 | [] [] [] [] [] [] [] [] | - gprof | [] [] [] | - gpsdrive | [] [] | - gramadoir | [] [] | - grep | [] [] [] [] | - grub | [] [] [] | - gsasl | [] [] [] [] | - gss | [] [] [] | - gst-plugins-bad | [] [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] | - gtkam | [] [] [] [] [] [] | - gtkorphan | [] | - gtkspell | [] [] [] [] [] [] [] [] [] [] | - gutenprint | [] [] | - hello | [] [] [] [] | - help2man | [] [] | - hylafax | [] | - idutils | [] [] [] [] [] | - indent | [] [] [] [] [] [] [] | - iso_15924 | [] [] [] [] | - iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | - iso_3166_2 | [] [] [] | - iso_4217 | [] [] [] [] [] [] [] [] | - iso_639 | [] [] [] [] [] [] [] [] [] | - iso_639_3 | [] [] | - jwhois | [] [] [] [] | - kbd | [] [] [] | - keytouch | [] [] [] | - keytouch-editor | [] [] [] | - keytouch-keyboa... | [] [] [] | - klavaro | [] [] | - latrine | [] [] | - ld | | - leafpad | [] [] [] [] [] [] [] [] [] | - libc | [] [] [] [] | - libexif | [] [] () [] | - libextractor | | - libgnutls | [] [] | - libgpewidget | [] [] [] | - libgpg-error | [] [] | - libgphoto2 | [] [] | - libgphoto2_port | [] [] [] [] [] | - libgsasl | [] [] [] [] [] | - libiconv | [] [] [] [] [] | - libidn | [] [] | - lifelines | [] [] | - liferea | [] [] [] [] [] () () [] | - lilypond | [] | - linkdr | [] [] [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] | - m4 | [] [] [] [] [] | - mailfromd | [] | - mailutils | [] | - make | [] [] [] [] | - man-db | [] [] [] | - man-db-manpages | [] [] [] | - minicom | [] [] [] [] | - mkisofs | [] [] [] | - myserver | | - nano | [] [] [] [] | - opcodes | [] [] | - parted | [] [] [] [] | - pies | [] | - popt | [] [] [] [] | - psmisc | [] [] [] | - pspp | [] [] | - pwdutils | [] | - radius | [] [] [] | - recode | [] [] [] [] [] [] [] [] | - rosegarden | () () | - rpm | [] [] [] | - rush | [] [] | - sarg | | - screem | | - scrollkeeper | [] [] [] [] [] [] [] [] | - sed | [] [] [] [] [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | [] | - skencil | [] [] | - solfege | [] [] [] [] | - solfege-manual | [] [] [] | - soundtracker | [] | - sp | | - sysstat | [] [] [] [] | - tar | [] [] [] [] | - texinfo | [] [] [] [] | - tin | [] | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | [] [] [] [] [] | - vice | [] | - vmm | [] | - vorbis-tools | [] [] | - wastesedge | [] | - wdiff | [] [] | - wget | [] [] [] [] [] [] [] | - wyslij-po | [] [] [] | - xchat | [] [] [] [] [] [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +---------------------------------------------------+ - nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr - 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37 - - sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW - +---------------------------------------------------+ - a2ps | [] [] [] [] [] | 27 - aegis | [] | 9 - ant-phone | [] [] [] [] | 9 - anubis | [] [] [] [] | 15 - aspell | [] [] [] | 20 - bash | [] [] [] | 12 - bfd | [] | 6 - bibshelf | [] [] [] | 16 - binutils | [] [] | 8 - bison | [] [] | 12 - bison-runtime | [] [] [] [] [] [] | 29 - bluez-pin | [] [] [] [] [] [] [] [] | 37 - bombono-dvd | [] | 4 - buzztard | [] | 7 - cflow | [] [] [] | 9 - clisp | | 10 - coreutils | [] [] [] [] | 22 - cpio | [] [] [] [] [] [] | 13 - cppi | [] [] | 5 - cpplib | [] [] [] [] [] [] | 14 - cryptsetup | [] [] | 7 - dfarc | [] | 9 - dialog | [] [] [] [] [] [] [] | 30 - dico | [] | 2 - diffutils | [] [] [] [] [] [] | 30 - dink | | 4 - doodle | [] [] | 7 - e2fsprogs | [] [] [] | 11 - enscript | [] [] [] [] | 17 - exif | [] [] [] | 16 - fetchmail | [] [] [] | 17 - findutils | [] [] [] [] [] | 20 - flex | [] [] [] [] | 15 - freedink | [] | 10 - gas | [] | 4 - gawk | [] [] [] [] | 18 - gcal | [] [] | 5 - gcc | [] [] [] | 7 - gettext-examples | [] [] [] [] [] [] [] | 34 - gettext-runtime | [] [] [] [] [] [] [] | 29 - gettext-tools | [] [] [] [] [] [] | 22 - gip | [] [] [] [] | 22 - gjay | [] | 3 - gliv | [] [] [] | 14 - glunarclock | [] [] [] [] [] | 19 - gnubiff | [] [] | 4 - gnucash | () [] () [] () | 10 - gnuedu | [] [] | 7 - gnulib | [] [] [] [] | 16 - gnunet | [] | 1 - gnunet-gtk | [] [] [] | 5 - gnutls | [] [] [] | 10 - gold | [] | 4 - gpe-aerial | [] [] [] | 18 - gpe-beam | [] [] [] | 19 - gpe-bluetooth | [] [] [] | 13 - gpe-calendar | [] [] [] [] | 12 - gpe-clock | [] [] [] [] [] | 28 - gpe-conf | [] [] [] [] | 20 - gpe-contacts | [] [] [] | 17 - gpe-edit | [] [] [] | 12 - gpe-filemanager | [] [] [] [] | 16 - gpe-go | [] [] [] [] [] | 25 - gpe-login | [] [] [] | 11 - gpe-ownerinfo | [] [] [] [] [] | 25 - gpe-package | [] [] [] | 13 - gpe-sketchbook | [] [] [] | 20 - gpe-su | [] [] [] [] [] | 30 - gpe-taskmanager | [] [] [] [] [] | 29 - gpe-timesheet | [] [] [] [] [] | 25 - gpe-today | [] [] [] [] [] [] | 30 - gpe-todo | [] [] [] [] | 17 - gphoto2 | [] [] [] [] [] | 24 - gprof | [] [] [] | 15 - gpsdrive | [] [] [] | 11 - gramadoir | [] [] [] | 11 - grep | [] [] [] | 10 - grub | [] [] [] | 14 - gsasl | [] [] [] [] | 14 - gss | [] [] [] | 11 - gst-plugins-bad | [] [] [] [] | 26 - gst-plugins-base | [] [] [] [] [] | 24 - gst-plugins-good | [] [] [] [] | 24 - gst-plugins-ugly | [] [] [] [] [] | 29 - gstreamer | [] [] [] [] | 22 - gtick | [] [] [] | 13 - gtkam | [] [] [] | 20 - gtkorphan | [] [] [] | 14 - gtkspell | [] [] [] [] [] [] [] [] [] | 45 - gutenprint | [] | 10 - hello | [] [] [] [] [] [] | 21 - help2man | [] [] | 7 - hylafax | [] | 5 - idutils | [] [] [] [] | 17 - indent | [] [] [] [] [] [] | 30 - iso_15924 | () [] () [] [] | 16 - iso_3166 | [] [] () [] [] () [] [] [] () | 53 - iso_3166_2 | () [] () [] | 9 - iso_4217 | [] () [] [] () [] [] | 26 - iso_639 | [] [] [] () [] () [] [] [] [] | 38 - iso_639_3 | [] () | 8 - jwhois | [] [] [] [] [] | 16 - kbd | [] [] [] [] [] | 15 - keytouch | [] [] [] | 16 - keytouch-editor | [] [] [] | 14 - keytouch-keyboa... | [] [] [] | 14 - klavaro | [] | 11 - latrine | [] [] [] | 10 - ld | [] [] [] [] | 11 - leafpad | [] [] [] [] [] [] | 33 - libc | [] [] [] [] [] | 21 - libexif | [] () | 7 - libextractor | [] | 1 - libgnutls | [] [] [] | 9 - libgpewidget | [] [] [] | 14 - libgpg-error | [] [] [] | 9 - libgphoto2 | [] [] | 8 - libgphoto2_port | [] [] [] [] | 14 - libgsasl | [] [] [] | 13 - libiconv | [] [] [] [] | 21 - libidn | () [] [] | 11 - lifelines | [] | 4 - liferea | [] [] [] | 21 - lilypond | [] | 7 - linkdr | [] [] [] [] [] | 17 - lordsawar | | 1 - lprng | [] | 3 - lynx | [] [] [] [] | 17 - m4 | [] [] [] [] | 19 - mailfromd | [] [] | 3 - mailutils | [] | 5 - make | [] [] [] [] | 21 - man-db | [] [] [] | 8 - man-db-manpages | | 4 - minicom | [] [] | 16 - mkisofs | [] [] | 9 - myserver | | 0 - nano | [] [] [] [] | 21 - opcodes | [] [] [] | 11 - parted | [] [] [] [] [] | 15 - pies | [] [] | 3 - popt | [] [] [] [] [] [] | 27 - psmisc | [] [] | 11 - pspp | | 4 - pwdutils | [] [] | 6 - radius | [] [] | 9 - recode | [] [] [] [] | 28 - rosegarden | () | 0 - rpm | [] [] [] | 11 - rush | [] [] | 4 - sarg | | 1 - screem | [] | 3 - scrollkeeper | [] [] [] [] [] | 27 - sed | [] [] [] [] [] | 30 - sharutils | [] [] [] [] [] | 22 - shishi | [] | 3 - skencil | [] [] | 7 - solfege | [] [] [] [] | 16 - solfege-manual | [] | 8 - soundtracker | [] [] [] | 9 - sp | [] | 3 - sysstat | [] [] | 15 - tar | [] [] [] [] [] [] | 23 - texinfo | [] [] [] [] [] | 17 - tin | | 4 - unicode-han-tra... | | 0 - unicode-transla... | | 2 - util-linux-ng | [] [] [] [] | 20 - vice | () () | 1 - vmm | [] | 4 - vorbis-tools | [] | 6 - wastesedge | | 2 - wdiff | [] [] | 7 - wget | [] [] [] [] [] | 26 - wyslij-po | [] [] | 8 - xchat | [] [] [] [] [] [] | 36 - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63 - xkeyboard-config | [] [] [] | 22 - +---------------------------------------------------+ - 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW - 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618 - - Some counters in the preceding matrix are higher than the number of -visible blocks let us expect. This is because a few extra PO files are -used for implementing regional variants of languages, or language -dialects. - - For a PO file in the matrix above to be effective, the package to -which it applies should also have been internationalized and -distributed as such by its maintainer. There might be an observable -lag between the mere existence a PO file and its wide availability in a -distribution. - - If June 2010 seems to be old, you may fetch a more recent copy of -this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date -matrix with full percentage details can be found at -`http://translationproject.org/extra/matrix.html'. - -1.5 Using `gettext' in new packages -=================================== - -If you are writing a freely available program and want to -internationalize it you are welcome to use GNU `gettext' in your -package. Of course you have to respect the GNU Library General Public -License which covers the use of the GNU `gettext' library. This means -in particular that even non-free programs can use `libintl' as a shared -library, whereas only free software can use `libintl' as a static -library or use modified versions of `libintl'. - - Once the sources are changed appropriately and the setup can handle -the use of `gettext' the only thing missing are the translations. The -Free Translation Project is also available for packages which are not -developed inside the GNU project. Therefore the information given above -applies also for every other Free Software Project. Contact -`coordinator@translationproject.org' to make the `.pot' files available -to the translation teams. - diff --git a/autogen.sh b/autogen.sh index 491191e..62faeeb 100755 --- a/autogen.sh +++ b/autogen.sh @@ -19,7 +19,8 @@ # # See the file ChangeLog for a revision history. -aclocal -I m4 \ +autopoint \ +&& aclocal -I m4 \ && autoheader \ && automake --add-missing \ && autoconf diff --git a/config.rpath b/config.rpath deleted file mode 100755 index 17298f2..0000000 --- a/config.rpath +++ /dev/null @@ -1,672 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2010 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit , 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - darwin*) - case $cc_basename in - xlc*) - wl='-Wl,' - ;; - esac - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - newsos6) - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - pgcc | pgf77 | pgf90) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - wl='-Wl,' - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we cannot use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if test "$GCC" = yes ; then - : - else - case $cc_basename in - xlc*) - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd1*) - ld_shlibs=no - ;; - freebsd2.2*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - freebsd2*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - library_names_spec='$libname.a' - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd1*) - ;; - freebsd* | dragonfly*) - case "$host_os" in - freebsd[123]*) - library_names_spec='$libname$shrext$versuffix' ;; - *) - library_names_spec='$libname$shrext' ;; - esac - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - nto-qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <, 1995-2000. -dnl Bruno Haible , 2000-2006, 2008-2010. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value `$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], - [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define([gt_included_intl], - ifelse([$1], [external], - ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), - [yes])) - define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) - gt_NEEDS_INIT - AM_GNU_GETTEXT_NEED([$2]) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation. - gt_INTL_MACOSX - - dnl Set USE_NLS. - AC_REQUIRE([AM_NLS]) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl Add a version number to the cache macros. - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH([included-gettext], - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], - [AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings;], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings], - [eval "$gt_func_gnugettext_libc=yes"], - [eval "$gt_func_gnugettext_libc=no"])]) - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - [$gt_func_gnugettext_libintl], - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *);], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], - [eval "$gt_func_gnugettext_libintl=yes"], - [eval "$gt_func_gnugettext_libintl=no"]) - dnl Now see whether libintl exists and depends on libiconv. - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *);], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - CATOBJEXT= - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Some extra flags are needed during linking. - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE([ENABLE_NLS], [1], - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE([HAVE_GETTEXT], [1], - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE([HAVE_DCGETTEXT], [1], - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST([BUILD_INCLUDED_LIBINTL]) - AC_SUBST([USE_INCLUDED_LIBINTL]) - AC_SUBST([CATOBJEXT]) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST([DATADIRNAME]) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST([INSTOBJEXT]) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST([GENCAT]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLOBJS= - if test "$USE_INCLUDED_LIBINTL" = yes; then - INTLOBJS="\$(GETTOBJS)" - fi - AC_SUBST([INTLOBJS]) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST([INTLLIBS]) - - dnl Make all documented variables known to autoconf. - AC_SUBST([LIBINTL]) - AC_SUBST([LTLIBINTL]) - AC_SUBST([POSUB]) -]) - - -dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. -m4_define([gt_NEEDS_INIT], -[ - m4_divert_text([DEFAULTS], [gt_needs=]) - m4_define([gt_NEEDS_INIT], []) -]) - - -dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) -AC_DEFUN([AM_GNU_GETTEXT_NEED], -[ - m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) diff --git a/m4/iconv.m4 b/m4/iconv.m4 deleted file mode 100644 index e2041b9..0000000 --- a/m4/iconv.m4 +++ /dev/null @@ -1,214 +0,0 @@ -# iconv.m4 serial 11 (gettext-0.18.1) -dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - [am_cv_func_iconv=yes]) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - [am_cv_lib_iconv=yes] - [am_cv_func_iconv=yes]) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ - dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10. - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - AC_TRY_RUN([ -#include -#include -int main () -{ - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\263"; - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - return 1; - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - return 1; - return 0; -}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no], - [case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac]) - LIBS="$am_save_LIBS" - ]) - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - AC_DEFINE([HAVE_ICONV], [1], - [Define if you have the iconv() function and it works.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST([LIBICONV]) - AC_SUBST([LTLIBICONV]) -]) - -dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to -dnl avoid warnings like -dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". -dnl This is tricky because of the way 'aclocal' is implemented: -dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. -dnl Otherwise aclocal's initial scan pass would miss the macro definition. -dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. -dnl Otherwise aclocal would emit many "Use of uninitialized value $1" -dnl warnings. -m4_define([gl_iconv_AC_DEFUN], - m4_version_prereq([2.64], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [[AC_DEFUN( - [$1], [$2])]])) -gl_iconv_AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL([am_cv_proto_iconv], [ - AC_TRY_COMPILE([ -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif -], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"]) - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([ - $am_cv_proto_iconv]) - AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], - [Define as const if the declaration of iconv() needs const.]) - fi -]) diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4 deleted file mode 100644 index ebb3052..0000000 --- a/m4/lib-ld.m4 +++ /dev/null @@ -1,110 +0,0 @@ -# lib-ld.m4 serial 4 (gettext-0.18) -dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL([acl_cv_path_LD], -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT([$LD]) -else - AC_MSG_RESULT([no]) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU -]) diff --git a/m4/lib-link.m4 b/m4/lib-link.m4 deleted file mode 100644 index c73bd8e..0000000 --- a/m4/lib-link.m4 +++ /dev/null @@ -1,774 +0,0 @@ -# lib-link.m4 serial 21 (gettext-0.18) -dnl Copyright (C) 2001-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_PREREQ([2.54]) - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - pushdef([Name],[translit([$1],[./-], [___])]) - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - popdef([NAME]) - popdef([Name]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. The missing-message -dnl defaults to 'no' and may contain additional hints for the user. -dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} -dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - pushdef([Name],[translit([$1],[./-], [___])]) - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, - dnl because these -l options might require -L options that are present in - dnl LIBS. -l options benefit only from the -L options listed before it. - dnl Otherwise, add it to the front of LIBS, because it may be a static - dnl library that depends on another static library that is present in LIBS. - dnl Static libraries benefit only from the static libraries listed after - dnl it. - case " $LIB[]NAME" in - *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; - *) LIBS="$LIB[]NAME $LIBS" ;; - esac - AC_TRY_LINK([$3], [$4], - [ac_cv_lib[]Name=yes], - [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - LIB[]NAME[]_PREFIX= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - popdef([NAME]) - popdef([Name]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl acl_libext, -dnl acl_shlibext, -dnl acl_hardcode_libdir_flag_spec, -dnl acl_hardcode_libdir_separator, -dnl acl_hardcode_direct, -dnl acl_hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - dnl Tell automake >= 1.10 to complain if config.rpath is missing. - m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE([rpath], - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_FROMPACKAGE(name, package) -dnl declares that libname comes from the given package. The configure file -dnl will then not have a --with-libname-prefix option but a -dnl --with-package-prefix option. Several libraries can come from the same -dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar -dnl macro call that searches for libname. -AC_DEFUN([AC_LIB_FROMPACKAGE], -[ - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - define([acl_frompackage_]NAME, [$2]) - popdef([NAME]) - pushdef([PACK],[$2]) - pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - define([acl_libsinpackage_]PACKUP, - m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1]) - popdef([PACKUP]) - popdef([PACK]) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found -dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) - pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) - dnl Autoconf >= 2.61 supports dots in --with options. - pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH(P_A_C_K[-prefix], -[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib - --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - LIB[]NAME[]_PREFIX= - dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been - dnl computed. So it has to be reset here. - HAVE_LIB[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - dnl The same code as in the loop below: - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$acl_hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi - popdef([P_A_C_K]) - popdef([PACKLIBS]) - popdef([PACKUP]) - popdef([PACK]) - popdef([NAME]) -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -dnl For those cases where a variable contains several -L and -l options -dnl referring to unknown libraries and directories, this macro determines the -dnl necessary additional linker options for the runtime path. -dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) -dnl sets LDADDVAR to linker options needed together with LIBSVALUE. -dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, -dnl otherwise linking without libtool is assumed. -AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], -[ - AC_REQUIRE([AC_LIB_RPATH]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - $1= - if test "$enable_rpath" != no; then - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode directories into the resulting - dnl binary. - rpathdirs= - next= - for opt in $2; do - if test -n "$next"; then - dir="$next" - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= - else - case $opt in - -L) next=yes ;; - -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= ;; - *) next= ;; - esac - fi - done - if test "X$rpathdirs" != "X"; then - if test -n ""$3""; then - dnl libtool is used for linking. Use -R options. - for dir in $rpathdirs; do - $1="${$1}${$1:+ }-R$dir" - done - else - dnl The linker is used for linking directly. - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user - dnl must pass all path elements in one option. - alldirs= - for dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="$flag" - else - dnl The -rpath options are cumulative. - for dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="${$1}${$1:+ }$flag" - done - fi - fi - fi - fi - fi - AC_SUBST([$1]) -]) diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4 deleted file mode 100644 index 1601cea..0000000 --- a/m4/lib-prefix.m4 +++ /dev/null @@ -1,224 +0,0 @@ -# lib-prefix.m4 serial 7 (gettext-0.18) -dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_PREPARE_MULTILIB creates -dnl - a variable acl_libdirstem, containing the basename of the libdir, either -dnl "lib" or "lib64" or "lib/64", -dnl - a variable acl_libdirstem2, as a secondary possible value for -dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or -dnl "lib/amd64". -AC_DEFUN([AC_LIB_PREPARE_MULTILIB], -[ - dnl There is no formal standard regarding lib and lib64. - dnl On glibc systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine - dnl the compiler's default mode by looking at the compiler's library search - dnl path. If at least one of its elements ends in /lib64 or points to a - dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. - dnl Otherwise we use the default, namely "lib". - dnl On Solaris systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or - dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. - AC_REQUIRE([AC_CANONICAL_HOST]) - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment - dnl . - dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." - dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the - dnl symlink is missing, so we set acl_libdirstem2 too. - AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], - [AC_EGREP_CPP([sixtyfour bits], [ -#ifdef _LP64 -sixtyfour bits -#endif - ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) - ]) - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" -]) diff --git a/m4/nls.m4 b/m4/nls.m4 deleted file mode 100644 index 003704c..0000000 --- a/m4/nls.m4 +++ /dev/null @@ -1,32 +0,0 @@ -# nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation, -dnl Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) diff --git a/m4/po.m4 b/m4/po.m4 deleted file mode 100644 index 47f36a4..0000000 --- a/m4/po.m4 +++ /dev/null @@ -1,449 +0,0 @@ -# po.m4 serial 17 (gettext-0.18) -dnl Copyright (C) 1995-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake - AC_REQUIRE([AM_NLS])dnl - - dnl Release version of the gettext macros. This is used to ensure that - dnl the gettext macros and po/Makefile.in.in are in sync. - AC_SUBST([GETTEXT_MACRO_VERSION], [0.18]) - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) - - dnl Test whether it is GNU msgfmt >= 0.15. -changequote(,)dnl - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([MSGFMT_015]) -changequote(,)dnl - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([GMSGFMT_015]) - - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Test whether it is GNU xgettext >= 0.15. -changequote(,)dnl - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac -changequote([,])dnl - AC_SUBST([XGETTEXT_015]) - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) - - dnl Installation directories. - dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we - dnl have to define it here, so that it can be used in po/Makefile. - test -n "$localedir" || localedir='${datadir}/locale' - AC_SUBST([localedir]) - - dnl Support for AM_XGETTEXT_OPTION. - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) - - AC_CONFIG_COMMANDS([po-directories], [[ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done]], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - -dnl Postprocesses a Makefile in a directory containing PO files. -AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], -[ - # When this code is run, in config.status, two variables have already been - # set: - # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, - # - LINGUAS is the value of the environment variable LINGUAS at configure - # time. - -changequote(,)dnl - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - # Find a way to echo strings without interpreting backslash. - if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='echo' - else - if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='printf %s\n' - else - echo_func () { - cat < "$ac_file.tmp" - if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - cat >> "$ac_file.tmp" < /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. - -AC_PREREQ([2.50]) - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL([ac_cv_path_$1], -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$][$1]) -else - AC_MSG_RESULT([no]) -fi -AC_SUBST([$1])dnl -]) diff --git a/po/Makefile.in.in b/po/Makefile.in.in deleted file mode 100644 index f2a4217..0000000 --- a/po/Makefile.in.in +++ /dev/null @@ -1,446 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU General Public -# License but which still want to provide support for the GNU gettext -# functionality. -# Please note that the actual code of GNU gettext is covered by the GNU -# General Public License and is *not* in the public domain. -# -# Origin: gettext-0.18 -GETTEXT_MACRO_VERSION = 0.18 - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - -SHELL = /bin/sh -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datarootdir = @datarootdir@ -datadir = @datadir@ -localedir = @localedir@ -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# @install_sh@ does not start with $(SHELL), so we add it. -# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) @install_sh@ -d -install_sh = $(SHELL) @install_sh@ -MKDIR_P = @MKDIR_P@ -mkdir_p = @mkdir_p@ - -GMSGFMT_ = @GMSGFMT@ -GMSGFMT_no = @GMSGFMT@ -GMSGFMT_yes = @GMSGFMT_015@ -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = @MSGFMT@ -MSGFMT_no = @MSGFMT@ -MSGFMT_yes = @MSGFMT_015@ -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = @XGETTEXT@ -XGETTEXT_no = @XGETTEXT@ -XGETTEXT_yes = @XGETTEXT_015@ -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = @MSGMERGE@ --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -# Makevars gets inserted here. (Don't remove this line!) - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: check-macro-version all-@USE_NLS@ - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -check-macro-version: - @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ - package_gnu='GNU '; \ - else \ - package_gnu=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_gnu}@PACKAGE@" \ - --package-version='@VERSION@' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(srcdir)/$(DOMAIN).pot - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) \ - && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ - esac; \ - }; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -install-info install-dvi install-ps install-pdf install-html: - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - $(MAKE) update-po - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - esac; \ - }; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -# Recreate Makefile by invoking config.status. Explicitly invoke the shell, -# because execution permission bits may not work on the current file system. -# Use @SHELL@, which is the shell determined by autoconf for the use by its -# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && @SHELL@ ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/po/Makevars.template b/po/Makevars.template deleted file mode 100644 index 32692ab..0000000 --- a/po/Makevars.template +++ /dev/null @@ -1,41 +0,0 @@ -# Makefile variables for PO directory in any package using GNU gettext. - -# Usually the message domain is the same as the package name. -DOMAIN = $(PACKAGE) - -# These two variables depend on the location of this directory. -subdir = po -top_builddir = .. - -# These options get passed to xgettext. -XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ - -# This is the copyright holder that gets inserted into the header of the -# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding -# package. (Note that the msgstr strings, extracted from the package's -# sources, belong to the copyright holder of the package.) Translators are -# expected to transfer the copyright for their translations to this person -# or entity, or to disclaim their copyright. The empty string stands for -# the public domain; in this case the translators are expected to disclaim -# their copyright. -COPYRIGHT_HOLDER = Free Software Foundation, Inc. - -# This is the email address or URL to which the translators shall report -# bugs in the untranslated strings: -# - Strings which are not entire sentences, see the maintainer guidelines -# in the GNU gettext documentation, section 'Preparing Strings'. -# - Strings which use unclear terms or require additional context to be -# understood. -# - Strings which make invalid assumptions about notation of date, time or -# money. -# - Pluralisation problems. -# - Incorrect English spelling. -# - Incorrect formatting. -# It can be your email address, or a mailing list address where translators -# can write to without being subscribed, or the URL of a web page through -# which the translators can contact you. -MSGID_BUGS_ADDRESS = - -# This is the list of locale categories, beyond LC_MESSAGES, for which the -# message catalogs shall be used. It is usually empty. -EXTRA_LOCALE_CATEGORIES = diff --git a/po/Rules-quot b/po/Rules-quot deleted file mode 100644 index af52487..0000000 --- a/po/Rules-quot +++ /dev/null @@ -1,47 +0,0 @@ -# Special Makefile rules for English message catalogs with quotation marks. - -DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - -en@quot.po-create: - $(MAKE) en@quot.po-update -en@boldquot.po-create: - $(MAKE) en@boldquot.po-update - -en@quot.po-update: en@quot.po-update-en -en@boldquot.po-update: en@boldquot.po-update-en - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -en@quot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header - -en@boldquot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header diff --git a/po/boldquot.sed b/po/boldquot.sed deleted file mode 100644 index 4b937aa..0000000 --- a/po/boldquot.sed +++ /dev/null @@ -1,10 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g -s/“/“/g -s/”/”/g -s/‘/‘/g -s/’/’/g diff --git a/po/en@boldquot.header b/po/en@boldquot.header deleted file mode 100644 index fedb6a0..0000000 --- a/po/en@boldquot.header +++ /dev/null @@ -1,25 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# -# This catalog furthermore displays the text between the quotation marks in -# bold face, assuming the VT100/XTerm escape sequences. -# diff --git a/po/en@quot.header b/po/en@quot.header deleted file mode 100644 index a9647fc..0000000 --- a/po/en@quot.header +++ /dev/null @@ -1,22 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# diff --git a/po/insert-header.sin b/po/insert-header.sin deleted file mode 100644 index b26de01..0000000 --- a/po/insert-header.sin +++ /dev/null @@ -1,23 +0,0 @@ -# Sed script that inserts the file called HEADER before the header entry. -# -# At each occurrence of a line starting with "msgid ", we execute the following -# commands. At the first occurrence, insert the file. At the following -# occurrences, do nothing. The distinction between the first and the following -# occurrences is achieved by looking at the hold space. -/^msgid /{ -x -# Test if the hold space is empty. -s/m/m/ -ta -# Yes it was empty. First occurrence. Read the file. -r HEADER -# Output the file's contents by reading the next line. But don't lose the -# current line while doing this. -g -N -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} diff --git a/po/quot.sed b/po/quot.sed deleted file mode 100644 index 0122c46..0000000 --- a/po/quot.sed +++ /dev/null @@ -1,6 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin deleted file mode 100644 index 2436c49..0000000 --- a/po/remove-potcdate.sin +++ /dev/null @@ -1,19 +0,0 @@ -# Sed script that remove the POT-Creation-Date line in the header entry -# from a POT file. -# -# The distinction between the first and the following occurrences of the -# pattern is achieved by looking at the hold space. -/^"POT-Creation-Date: .*"$/{ -x -# Test if the hold space is empty. -s/P/P/ -ta -# Yes it was empty. First occurrence. Remove the line. -g -d -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} -- 1.7.0.4